WARRIOR 59697 18V 1.5AH Battery and Charger Owner’s Manual

WARRIOR 59697 18V 1.5AH Battery and Charger

Product Information

The product is a battery and charger with model number 23e and serial number 4000526 22l. It has a voltage of 18V and a capacity of 1.5AH. The product comes with an owner’s manual and safety instructions that provide assembly, operating, inspection, maintenance, and cleaning procedures. The manual also includes important safety information and warning symbols that users must follow to avoid potential personal injury hazards. Tools required for assembly and service may not be included. If any parts are missing or broken, users should contact the manufacturer’s technical support at productsupport@harborfreight.com or call 1-888-866-5797 as soon as possible.

Product Usage Instructions

1. Before using the product, read the owner’s manual and safety instructions carefully to understand the assembly, operating, inspection, maintenance, and cleaning procedures.
2. When unpacking the product, make sure it is intact and undamaged. If any parts are missing or broken, contact the manufacturer’s technical support immediately.
3. Write the product’s serial number on the back of the manual near the assembly diagram or the month and year of purchase if the product has no number.
4. Keep the manual and receipt in a safe and dry place for future reference.
5. Charge only designated battery packs. Using any other battery packs may create a risk of injury and fire.
6. Do not insert a damaged battery pack or charge non-rechargeable batteries.
7. Place the charger on a stable, solid, nonflammable surface at least 1 foot away from all flammable objects such as drapes or walls. Do not place the charger on a flammable surface or obstruct any vents on the charger. Avoid placing the charger on carpets and rugs as they may obstruct vents under the charger.
8. Frequently monitor the charger and battery pack while charging. The charger gets hot during use and may build up to unsafe levels if it does not receive adequate ventilation, due to an electrical fault or if it is used in a hot environment.
9. Wear ANSI-approved safety goggles during use.
10. When the battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery pack terminals together may cause burns or a fire.
11. Under abusive conditions, liquid may be ejected from the battery pack; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, seek medical help immediately. Liquid ejected from the battery pack may cause irritation or burns.

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for safety warnings and precautions, assembly, operating, inspection, maintenance, and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or the month and year of purchase if the product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER

Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

NOTICE

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Charger Safety Warnings

WARNING

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product but must be supplied by the operator.

1. The Charger gets hot during use. The Charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment. Do not place the Charger on a flammable surface. Do not obstruct any vents on the Charger. Especially avoid placing the Charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the Charger. Place the Charger on a stable, solid, nonflammable surface (such as a stable metal workbench or concrete floor) at least 1 foot away from all flammable objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area. Frequently monitor the Charger and Battery Pack while charging.
2. Charge only designated battery packs; others may overheat, leak, or burst.
3. Follow charging instructions.
4. Do not insert a damaged battery pack.
5. Check frequently while charging.
6. Wear ANSI-approved safety goggles during use.
7. Use chargers only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
8. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery pack terminals together may cause burns or a fire.
9. Under abusive conditions, liquid may be ejected from the battery pack; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery pack may cause irritation or burns.
10. Do not expose chargers to rain or wet conditions. Water entering a Charger will increase the risk of electric shock. Charge indoors only.
11. Keep the charging area clean and well-lit. Cluttered or dark areas invite accidents.
12. Do not operate chargers in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Chargers create sparks that may ignite the dust or fumes.
13. Charger plugs must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce the risk of electric shock.
14. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the Charger. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
15. Store idle chargers out of the reach of children and do not allow persons unfamiliar with the Charger or these instructions to operate the Charger.
16. Maintain chargers. Check for breakage of parts and any other condition that may affect the Charger’s operation. If damaged, have the Charger repaired before use?
17. Have your Charger serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the Charger is maintained.
18. Inspect before every use; do not use if parts are loose or damaged.
19. Use as intended only.
20. Unplug after use and before service, cleaning, or storage.
21. Maintain labels and nameplates on the Charger. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
22. This product is not a toy. Keep it out of reach of children.
23. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should properly maintain and inspect to avoid electrical shock.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY AND WILL VENT FIRE OR EXPLODE IF MISTREATED

1. DO NOT DO ANY OF THE FOLLOWING TO THE BATTERY PACK:
   • Open,
   • Drop,
   • Short-circuit,
   • Puncture,
   • Incinerate, or
   • Expose to temperatures greater than 140°F.
2. Keep the Battery Pack dry.
3. Charge Battery Pack only according to its Charger’s instructions.
4. Inspect the Battery Pack before every use; do not use or charge if damaged.

SAVE THESE INSTRUCTIONS

Grounding

WARNING

• GroundingTO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING:
• Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. If damaged, have it repaired by a
• service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Extension Cords

Note: Extension cords must not be used with this Charger.

Symbology

| Double Insulated|  | | WARNING marking concerning Risk of Fire.

Do not cover Charger ventilation ducts.

Charge on fireproof surfaces only.

|
---|---|---|---|---|---
| Volts
| Alternating Current
****| WARNING marking concerning Risk of Electric Shock.

Properly connect Charger’s power cord to the appropriate outlet.

|
| Amperes
****| WARNING marking concerning Risk of Eye Injury.

Wear ANSI‑approved safety goggles with side shields.

****| WARNING marking concerning Risk of Explosion.

Do not puncture, short, or open battery packs, and do not charge damaged battery packs.

|
****| Read the manual before set‑up and/or use.
 |

Specifications

Battery Pack

Rating| 18VDC / 1.5AH
Battery Type| Li‑ion
Charger
Input Rating| 120V / 60Hz / 0.2A
Output Rating| 24V / 0.3A

Functions

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before setting up or use of this product.

1. Place Battery Pack on a dry fireproof surface in a room where the temperature is from 50–104° F.
   Note: If recharging a newly spent Battery Pack, allow it to cool completely before charging.

2. Examine the Battery Pack.
   It must be undamaged, and a Warrior 18V Li-ion Battery Pack. Do not charge a cracked, open, or leaking Battery Pack, or charge a non‑recommended type of Battery Pack.

3. Connect Charger to Battery Pack.

4. Plug Charger into a grounded, 120VAC, 60Hz receptacle.
   Note: Battery Pack’s capacity will increase somewhat during the first few charging cycles. A fully discharged Battery Pack will take about 3-5 hours to fully charge.

5. While charging, Battery Pack and Charger may become warm to the touch. This is normal and does not indicate a problem.

6. Battery Pack’s Charging Light will light continuously when it is charging. The charging Light will turn off when Battery Pack is fully charged. Unplug the Charger and disconnect it from Battery Pack when finished.
   CAUTION! The charger needs to be disconnected when charging is finished to prevent overcharging.

7. Allow the Battery Pack to cool completely before using it.

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

WARNING

• TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
• Remove the Battery Pack and unplug the charger before performing any inspection, maintenance, or cleaning procedures.
• TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
• Do not use damaged equipment.
• If damage is noted, have the problem corrected before further use?

1. BEFORE EACH USE, inspect the general condition of the charger. Check for:

   • loose hardware,
   • misalignment or binding of moving parts,
   • cracked or broken parts,
   • damaged electrical wiring, and
   • any other condition that may affect its safe operation.

2. AFTER USE, wipe the external surfaces of the charger with a clean cloth.

3. Li-Ion BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
   Do not short, incinerate, or open battery.

4. Disconnect the Battery Pack and store the Charger and any Battery Packs in a dry, indoor area out of reach of children and away from metal objects (i.e., paperclips, coins) to prevent shorting.

WARNING! TO PREVENT SERIOUS INJURY AND DEATH FROM ELECTRIC SHOCK:

• Do not open Charger.
• Do not service internal parts.

Record Product’s Serial Number Here
Note: Replacement parts are not available for this item. Reference UPC 193175508881.

Limited 90-Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special, or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797.Visit our website at: http://www.harborfreight.com  Email our technical support at: productsupport@harborfreight.com.When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑888‑866‑5797 as soon as possible. Copyright© 2023 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, the actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>