vtech Switch & Go Spinosaurus Race Car User Guide

June 6, 2024
vtech

vtech logo x123

Parent’s Guide

Switch & Go Spinosaurus Race Car

Switch & Go Spinosaurus Race Car - 2

91-003644-003 US CA

INTRODUCTION

Thank you for purchasing the Switch & Go™ Spinosaurus Race Car! Engage your imagination with this speedy race car that transforms into a super cool spinosaurus. Fun sounds and phrases bring the action to life in your very own dinosaur universe.

vtech Switch & Go - INTRODUCTION 1

  1. Talk Button
  2. Sound Effect Button
  3. LED Lights

vtech Switch & Go - INTRODUCTION 2

  1. On/Off/Volume Selector

INCLUDED IN THIS PACKAGE

  • Switch & Go™ Spinosaurus Race Car
  • Parent’s guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE
Please keep this parent’s guide as it contains important information.

GETTING STARTED

Battery Removal and Installation

vtech Switch & Go - Battery

  1. Make sure the unit is turned Off.
  2. Find the battery cover located on the bottom of the unit and use a screwdriver to loosen the screw and open the battery cover.
  3. Remove the old battery by pulling up on one end of it.
  4. Install 1 new AAA (LR03/AM-4) battery following the diagram inside the battery box.
  5. Replace the battery cover and tighten the screw to secure.

BATTERY NOTICE

  • Use new alkaline batteries for maximum performance.
  • Use only batteries of the same or equivalent type as recommended.
  • Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable, or new and used batteries.
  • Do not use damaged batteries.
  • Insert batteries with the correct polarity (+ and -).
  • Do not short-circuit the battery terminals.
  • Remove exhausted batteries from the toy.
  • Remove batteries during long periods of non-use.
  • Do not dispose of batteries in fire.
  • Do not charge non-rechargeable batteries.
  • Remove rechargeable batteries from the toy before charging (if removable).
  • Rechargeable batteries are only to be charged under adult supervision.

PRODUCT FEATURES

1. On/Off/Volume Selector   

vtech Switch & Go - FEATURES
1

To turn the unit On or adjust the volume, slide the switch to Low or High .
To turn the unit Off , slide the switch to Off .

vtech Switch & Go - FEATURES 7

2. Talk Button

Press the Talk Button to hear fun phrases from the dino or driver.

vtech Switch & Go - FEATURES 8

3. Sound Effect Button

Press the Sound Effect Button to hear cool sound effects.

vtech Switch & Go - FEATURES 9

4. Automatic Shut-Off

To preserve battery life, the unit will automatically shut off after approximately 20 seconds without input. The unit can be turned on again by pressing any button.

TRANSFORMATION

vtech Switch & Go - TRANSFORMATION 1

1. Begin in Vehicle mode.

vtech Switch & Go - TRANSFORMATION 2

2. Flip the legs down.

vtech Switch & Go - TRANSFORMATION 3

3. Unfold the tail.

vtech Switch & Go - TRANSFORMATION 4

4. Rotate the claws down.

vtech Switch & Go - TRANSFORMATION 5

5.Finish in Dino mode.

NOTE
To switch the dino back into a vehicle, follow the above steps in reverse order.

CARE & MAINTENANCE

  1. Keep the unit clean by wiping it with a slightly damp cloth.
  2. Keep the unit out of direct sunlight and away from any direct heat sources.
  3. Remove the batteries if the unit will not be in use for an extended period of time.
  4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

  1. Turn the unit Off.
  2. Interrupt the power supply by removing the batteries.
  3. Let the unit stand for a few minutes, then replace the batteries.
  4. Turn the unit On. The unit should now be ready to use again.
  5. If the unit still does not work, install a new set of batteries.

IMPORTANT NOTE
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or visit our website vtechkids.com and fill out our Contact Us form located under the Customer Support link. Creating and developing VTech products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help.
Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Trade Name:             VTech®
Model:                       5208
Product Name:          Switch & Go™ Spinosaurus Race Car
Responsible Party:     VTech Electronics North America, LLC
Address:                    1156 W. Shure Drive, Suite 200 Arlington Heights, IL 60004
Website:                     vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)

vtech Switch & Go - Class 1

Visit our website for more information about our products, downloads, resources and more.

vtechkids.com

Read our complete warranty policy online at vtechkids.com/warranty

vtech logo x123

TM & © 2019 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003644-003 US CA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals