BRILLIHOODAV-SDL04-R170-12W 6-Inch Color Changing Slim LED Recessed Light User Manual

BRILLIHOODAV-SDL04-R170-12W 6-Inch Color Changing Slim LED Recessed Light

Thanks for choosing us, in this box you will find a Hub and 6pcs recessed smart led ceiling light. Please pair the smart led ceiling light one by one before installing, this will simplify the installation and configuration process.

App Download and Register:

1. Download the App Install the “ Smart Life ” App from either the App Store or Google Play Store. Or scan this QR code with your smart phone to find the App

2. Register and Login
   After downloading the Smart Life App create a new account:

3. Select “Login”

4. Select your country code, enter your e-mail address or phone number and press “Obtain verification code”

5. Enter the code received by e-mail or phone, set your password and select “Completed”.

Add Device:

Please pair the smart light one by one before installation. You need to be within 15m of the light during setup and BlueTooth should be enabled on your phone/device, Power on the smart light and it will flashing quickly, If not flash, please reset it by turn on and turn off 3 times. Open the Smart Life app, the light that is ready for pairing will be displayed, then simply follow the app based instructions to setup the device.

If fail to add on APP, please reset the light even it still flashing, try above process again. If this does not work, back to home page, Tap Add Device or the plus (+) icon in the top right corner, selecting the “Lighting” tab from the left side then scroll down until you see “Ceiling Light(BLE)”, select this option to take you to the setup page.

Set Lights Work With Alexa, Google Home And Away From Home Control

To enable the smart lights “Away from home control”, controlled by Alexa and Google Home, we should add the Hub between Lights and WiFi Gateway at home.

1. Add Hub
   Power on the Hub and the red indicator will blinking Slowly, If the light is not blinking, please reset the Hub by press and hold reset button a few seconds. Open the Smart Life app, the Hub that is ready for pairing will be displayed, then simply follow the app based instructions to setup the device. If this does not work try to add the Hub Manually: Tap Add Device or the plus (+) icon in the top right corner, selecting the “Gateway Control” tab from the left side then scroll down until you see “Wireless Gateway(BLE)”, select this option to take you to the setup page. Tick the box to confirm the indicatoris blinking rapidly. If the light is not blinking then follow the instructions on this page of the App to reset the HuB. Click “Next”,APP will find the Hub, press “Next”, enter the password of the WiFi network you are connected to, press “Next”. When connecting the device, you can see the connection status as shown, waiting for setup finish. If you have been unable to add the light so far, you can try Access Point (AP) Mode. Tap Add Device or the plus (+) icon in the top right corner, selecting the “Gateway Control” tab from the left side then scroll down until you see “Wireless Gateway(BLE)”, select this option to take you to the setup page. Tap option in the top right corner, selecting the “AP Mode”; Tick the box to confirm the indicator is blinking Slowly. If the light is not blinking then follow the instructions on this page of the App to reset the Hub. Click “Next” enter the password of the WiFi network you are connected to, press “Next” enter the instrustion page, press “Go to connect”, selecting “SmartLife-XXX”, press the back button in the top left corner, on APP you can see the connection status as shown.

2. Add Smart Lights on Hub
   Tap Hub enter to its setting page, tap “Add device by list” to device list, selecting all the smart lights and adding them to the Hub, then we can “ Away from home control ” all the smart lights.

3. Adding to Amazon Alexa
   First link the Smart Life app to Amazon App by selecting the “more” option at the bottom of the Alexa App, then selecting “Skills & Games”, click on the search icon in the top right and type “Smart Life” into the field. You will be redirected to the account link page.Type in your Tuya Smart account and password, don’t forget to select the country/region where your account belongs to. Then tap “Link Now” to link your Tuya Smart account. The country/region, the account, and thepassword must match with the exact content Link with Verification Code, open Tuya SmartApp, click “Me–More, Services–Alexa” To add the light to Alexa say “Alexa, discoverdevices” or go to “Add Devices” by selectingthe “+” symbol on the device page.Now you can now use the following commands to control your device;

   • Alexa, turn on the light.
   • Alexa, set light to 50 percent.
   • Alexa, turn off living room light
     If you prefer you could rename the device in the Smart Life App and use that description in Alexa. More detailed Instructions can be found by scanning this QR code.

4. Adding to Google Assistant
   You should see the Connect Smart Life option at the top of the home screen, click on this and you will be redirected to the account link page. Type in your Tuya Smart account and password. The app will list all connected devices, select the Night Sabre and Add it to a room Now you can use the following commands to control your device;

   • Siri, turn on all the light.
   • • Siri, set Night Sabre to 50 percent.
   • Siri, turn of living room light
     If you prefer you could rename the device to “Ceiling Light” or “Down Light” in the Smart Life App and use that description in Google Assistant. More detailed Instructions can be found by scanning this QR code.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>