BRILLIHOOD 4FT LED Vapor Tight Light Fixture Linkable Installation Guide
- June 16, 2024
- BRILLIHOOD
Table of Contents
BRILLIHOOD 4FT LED Vapor Tight Light Fixture Linkable
Installation
Installation steps：
- Drill Ø4mm holes on the surface
- Put the expansion tube into the drilled hole
- Using screws to lock the hook into the expansion tube
- Align the lamp with the hook and lock it
Linkable wiring diagram
-
Pass the wire to be installed through the waterproof nut (Figure 1),
-
insert the corresponding brown wire into the red hole,
-
the blue wire into the black hole, and the yellow-green ground wire into the yellow hole (Figure 2),
-
finally tighten the waterproof connector (Figure 3). If the cord cannot be inserted directly, press the corresponding button before inserting the cord.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>