OZARKE 714651393625OZ Minimalist Vintage Crystal Pendant Light Instruction Manual

OZARKE 714651393625OZ Minimalist Vintage Crystal Pendant Light

Product Information

Specifications:

• Power Supply Range : 100-240V, 50Hz
• Usage: Indoor
• Material: Not specified
• Installation: Ceiling mount
• Usage Environment : Dry indoor areas only

Product Usage Instructions

Safety Instructions:

1. Turn off the power before starting any work.
2. Use appropriate tools designed for electrical work.
3. Wear safety glasses, gloves, and other protective gear.
4. Test for power using a non-contact voltage tester before touching any wires.
5. Avoid working in wet or damp conditions.
6. Maintain a safe distance from exposed wires or electrical components.
7. Seek professional help if unsure about electrical wiring.

Installation Instructions:

Step 1 :

1. Mark the position of the hanging plate hole on the cement ceiling.
2. Create a hole in the ceiling based on the size of the expansion screw and insert the screw.
3. Secure the hanging plate onto the expansion screw with a nut to support the lamp body.

Step 2 :

1. Install the light components as per the provided diagram.
2. Connect wires of each lamp head with the same color and then connect them with the neutral wire.
3. Ensure the lamp body is securely locked onto the ceiling after installation.
4. Cut off the power supply when installing or replacing the light source.

Note: The provided instructions are for reference. Please follow the actual product installation guidelines based on the physical objects.

Frequently Asked Questions (FAQ):

1. Q: Can the lamp be installed outdoors?
   A: No, the lamp should not be installed outdoors to prevent damage.

2. Q: What should I do if I encounter discrepancies in the parts during unpacking?
   A: If you find any discrepancies in the parts, please contact customer service promptly for assistance.

INSTRUCTION MANUAL

Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at
info@ozarke.com and one of our customer service reps will reach out to assist you.
Before you get started:
When working with electrical wiring, follow these safety instructions to prevent injury or damage:

1. Turn off the power: Before starting any work, turn off the power to the area you will be working in.
2. Use appropriate tools: Only use tools designed for electrical work and in good condition.
3. Wear   protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
4. Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
5. Avoid wet conditions : Do not work with electrical wiring in wet or damp conditions.
6. Keep a safe distance: Stay away from exposed wires or electrical components.
7. Seek professional help: C onsult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.

WARNING!

1. Do not use the power supply beyond the specified range (100-240V,50Hz).
2. Avoid scratching the surface and wires of the lamp during installation.
3. Do not install the lamp outdoors.
4. The lamp should not be close to corrosive chemical objects or gases.
   It should not be washed with water. It can only be wiped with a clean soft cloth.

Installation Instructions

NOTE: After opening the packing box, please carefully inspect the parts inside by comparing them to the provided drawings. If there are any discrepancies, please contact customer service promptly.

INSTALLATION STEP 1:

1. Mark the position of the hanging plate hole on top of the cement.
2. Based on the size of the expansion screw, create a hole in the cement ceiling, then insert the expansion screw into the ceiling hole with the M6 threads exposed.
3. Remove the nut, secure the hanging plate onto the expansion screw, place the gasket, and then fasten the hanging plate to the ceiling with the nut. This ensures a strong connection between the hanging plate and the expansion  screw to support the weight of the lamp body.

INSTALLATION STEP 2:

1. As shown in the right figure, install the light components first.
2. As shown in the figure on the right, first install the wiring method of each light part. Connect the wires with the same color of each lamp head, and then connect them with the neutral wire respectively.
3. After the lamp body is installed, check whether it is securely locked onto the ceiling.
4. Cut off the power supply when installing or replacing the light source.

The screw should be used to securely fasten the hanging plate.

Note: This instruction is for reference only. The actual products should be based on the physical objects.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>