JBL LIVE PRO+ TWS True Wireless In-Ear NC Headphones User Guide
- June 6, 2024
- JBL
Table of Contents
- JBL LIVE PRO+ TWS True Wireless In-Ear NC Headphones User Guide
- WHAT’S IN THE BOXMSLML
- APP
- how to wear
- First time use
- POWER &CONNECT
- DUAL CONNECT + SYNC
- POWER OFF
- MANUAL CONTROLS
- LBUTTON COMMAND
- Auto Play/Pause
- DO MORE WITH THE APP
- HANDS-FREE VOICE CONTROL
- HANDS-FREE VOICE CONTROL
- TECHGING
- led behaviors
- TECH SPEC
- IC RF Exposure Information and Statement
- Head operation
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL LIVE PRO+ TWS True Wireless In-Ear NC Headphones User Guide
WHAT’S IN THE BOXMSLML
APP
how to wear
First time use
POWER &CONNECT
DUAL CONNECT + SYNC
POWER OFF
MANUAL CONTROLS
LBUTTON COMMAND
Enable advance controls by connecting your JBL Live PRO+TWS to My JBL Headphones App .** ENABLE VOICE ASSISTANT THROUGH MY JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
Auto Play/Pause
DO MORE WITH THE APP
HANDS-FREE VOICE CONTROL
Get more done on the go. Say “Ok Google” to get started.
Play my Workout playlist”“Turn up the volume”“Send a message”“What’s my
schedule today?”“Set an alarm for 7 AM”
HANDS-FREE VOICE CONTROL
TECHGING
led behaviors
TECH SPEC
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-LIVEPROTWSP) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.7975 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.