SHARP Party Speaker System PS-919 User Manual

June 6, 2024
Sharp

Sharp-logo

SHARP Party Speaker System PS-919

SHARP Party Speaker System PS-919 image

What is included in the box

  • 1 x PS-919
  • 1 x Power Adapter
  • 1 x EU AC plug for power adapter 1 x UK AC plug for power adapter 1 x User Manual
  • 1 x Quick start guide
  • 1 x Warranty Card

Panels & Controls

SHARP Party Speaker System PS-919 fig2

TOP VIEW

  1. button 1– Press the button to turn on the unit. Long press the button to turn off the unit.

  2. button 2– Short press: changes the front light mode
    Long press (2 sec): changes the side light mode
    Longer press (4 secs): switch all the lights off

  3. button3 – Shortly press the button to toggle between Bass & 3D surrounding modes:
    A. Bass Off , 3D Off – orange LED is off
    B. Bass On, 3D Off – orange LED continuously light
    C. Bass Off , 3D On – orange LED slowly fl ashing
    A long press of the button will swich off both modes: Bass Off , 3D Off .

  4. button 4– Press the button to turn up the playing volume. Long press the button to skip to the next playing track.

  5. SOURCE button5 – Press the button repeatedly to switch the playback mode: Bluetooth, AUX, USB. A long press of the button will activate the TWS/Duo mode function.
    Note that the USB mode can only be selected if a USB stick is plugged into the unit.

  6. button 6– Press the button to play or pause the playback. Long press of the button will disconnect bluetooth connection.

  7. button7 – Press the button to turn down the playing volume. Long press the button skip to the previous playing track.

  8. SOURCE INDICATOR – Switch to Bluetooth mode, the blue light turns on and starts fl ashing when pairing. Once paired, the blue light stops fl ashing. Switch to USB mode, the blue light fl ashes rapidly three times, then goes off , then two seconds later, three times, and so on. Switch to AUX mode, the blue light fl ashes slowly and continuously

  9. BATTERY STATUS INDICATORS

  10.  3D/Bass indication – When Bass Off and 3D surround Off LED is Off . When Bass On and 3D surround Off orange LED continuously light. When Bass Off and 3D surround On orange LED slowly fl ashing.

  11. RECHARGING INDICATOR – When the charger is connected, red light turns on. When the device is fully charged, the red light turns off .

SHARP Party Speaker System PS-919 fig1

REAR VIEW

  1. DC 18V – AC Adapter input port.
  2. USB PORT – USB port supports playback and charging. Read audio fi les in MP3 format in USB storage device in capacity up to 32GB (FAT32). Or Charge your mobile device through the 5V/1A USB port.
  3. AUX IN JACK – Connect the 3.5mm audio cable to enjoy the external audio music.

Operation instruction

Charging the Speaker
This speaker uses built-in batteries. Before using it, charge the batteries by connecting the AC adapter.
Connect the AC power adapter (supplied) to the DC 18V input port on the rear of the unit, and then to the wall outlet.
SHARP Party Speaker System PS-919 fig3

CAUTION: Only use the AC adapter supplied with this device. Only use the supplied power supply. If you do not use this adapter, charging is unavailable or charging time may diff er. And it may cause damage to the device.

Power On the Speaker
Press POWER ON/OFF button on the top panel of the unit to power on.
First time to use, the “Source indicator“ fl ashes blue, indicating that the unit is in paring mode.
TIPS:

  • In order to disable or enable the voice messaging, please press and hold SOURCE button 3 seconds during power up operation.
  • When you power on the speaker again after Bluetooth setup, the unit will search for the previous paired device. Once found, it will paired with that device automatically.

Power Off the Speaker
Press the POWER ON/OFF button to turn off the unit.
After 15 mins with no activity/connection the unit will automatically power off to conserve battery.

Bluetooth Connection

  1. Press the SOURCE button repeatedly to switch to Bluetooth mode. Unit will say “Bluetooth”.
  2. Make sure that the unit is in pairing mode.
  3. Enable Bluetooth on your device to be paired with the unit. Select ‘’Sharp PS-919,, from the available devices (enter the password ‘’0000,, if necessary) to start pairing and connection with the unit.
  4. After successful connection, “Source indicator“ indicator turns solid blue and you hear a voice prompt (“Connected”).
  5. This unit is compatible with the voice assistant on your smart device.

NOTES:

  • This speaker supports automatic connection with a previously paired device after power off and power on again.
  • If you want to pair with a new Bluetooth device, you must disconnect the paired device.
  • To disconnect the Bluetooth connection, long press button. Or you can turn off the Bluetooth function in your smart device. Device will say “disconected”.

Connect two PS-919 via Bluetooth (TWS)

TWS/True wireless Stereo – Duo Mode

  • This allows for two PS-919 party speakers to be connected together as a left and right stereo speakers for a real stereo experience. The fi rst connected speaker is the master one and the second the slave.
  • Press and hold the SOURCE button on the second speaker until the speaker says “Duo Mode pairing” then release the buttons.
  • Please wait until speakers say “Duo Mode connected”. The speakers are now connected to each other.
  • Pair the master speaker with your phone.
  • For Bluetooth pairing to a Bluetooth-out enabled smart device search for Bluetooth Pairing name “Sharp PS-919” on your device and pair.
  • When you will power off one speaker in Duo Mode, both speakers will power off .
  • When you Power on the speakers, they need to be turned on individu-ally.
  • When both speakers are powered on Duo Mode will automatically reconnect and you will hear “Duo Mode connected”.
  • To disconnect Duo Mode press and hold SOURCE button on the slave speaker until you hear “Duo Mode disconnected”

NOTES:

  • It takes up to 1 minute to connect to Duo Mode.
  • When you enjoy Duo Mode, Multi phone pairing is not supported. The Master speaker connects only one Bluetooth device.
  • In Duo Mode, you can connect only the Master speaker with the Bluetooth device.
  • To change the Bluetooth device in Duo Mode, press and hold on Mas ter unit for 3 seconds to disconnect current Bluetooth device and connect to the desired Bluetooth device.
  • When you connect a Bluetooth device (iOS device etc.) to this unit or operate the device, the volume level can be synchronized between each device.
  • When in Duo Mode, the functions of power and  move on buttons will be synchronized with two speakers.
  • In Duo Mode, make the distance between the speakers as close as possible each other.
  • Depending on network environment, the Duo Mode may not work well.
  • When the Duo Mode is entered, some mobile phones (ex. AptX HD suppor-ted devices) play music after a brief pause.
  • Some mobile phones might not play music properly when you try to connect Duo Mode during playback.
  •  Reset the Duo Mode connection: Disconnect by long press the SOURCE button on the slave speaker until you hear ” Duo Mode disconnected”. Connection is reset.

Listening to Music from External Device
The unit can be used to listen to the music from many types of external device.

  1. Connect an auxiliary audio device to the unit through the 3.5mm audio input port.
  2. Press the SOURCE button to repeatedly to switch to AUX mode. The blue light fl ashes slowly in Aux mode.
  3. Play and control music on the audio device, and use the buttons on previous and nextthe unit to adjust the volume.

USB Playback and Charging functions

The USB port on the rear panel of the unit supports playback and charging.

  1. Insert the USB drive into USB slot on the back of the unit.

  2. Unit will enter to USB mode automatically.

  3. Unit start play a songs from the USB immediatelly.
    NOTES:

    • The USB mode only can be entered when the USB device is plugged.
    • supports USB memory key up to 32GB
    • supported audio formats is MP3
  4. Mobile devices can be charged via the USB port.

Adjust the Light Effects

  1. Short press the blub button on top panel of the unit to change the fl ashing mode for the center light. There are 4 fl ashing effects:
    • Colors gradually fl ashing.
    • Dynamic fl ashing, the lights will fl ashes with the music.
    • Color rotating fl ashing.
    • Monochrome rotating fl ashing.
    •  Off .
  2. Long press (2 sec): changes the side light mode
  3. Longer press (4 secs) : switch all the lights off

Technical specification

SHARP Party Speaker System PS-919 fig5 SHARP
Party Speaker System PS-919 fig6

Notes: Design and specifi cations are subject to change without notice.

SHARP Party Speaker System PS-919 fig4

Important safety instructions

Please, read these safety instructions and respect the following warnings before the appliance is operated:

  • The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude as to constitute a risk of electric shock to persons.
  • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Use only power supply listed in the user manual.
  • This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.
  • AC voltage
  • DC voltage
  • Class II equipment
  • For indoor use only
  • Energy effi ciency marking with level VI
  • Polarity of d.c. power connector

In order to prevent fi re always keep candles and other open flames away from this product.

  • Always follow basic safety precautions when using this applience, espe-cially when children are present.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Do not damage the power cord, neither do not place any heavy objects on it, do not strech it or bend it. Also do not attach extension cables. If the supply cord is damaged, fi re or electric shock may occur.
  • If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or similarly qualied persons in order to avoid a hazard.
  • Ensure that the unit is plugged into an AC 220-240V 50Hz power outlet. Using higher voltage may cause the unit to malfunction or even fi re catching.
  • If the power plug does not fi t into the socket, do not force it.
  • Turn off the unit before unplugging it from power source to completely switch it off .
  • Connecting or disconnection the power cord with wet hands may cause electric shock.
  • NOTE: To disconnect the system completely if it not to be used for a long time, remove the AC power plug from the wall outlet.
  • Ensure that the mains plug is always easily accessible.
  • This product does not contain any parts that are serviceable by the user. In case of a fault, contact the manufacturer or authorised service department. Exposing the internal parts inside the device may endanger your life. The manufacturers guarantee does not extend to faults caused by repairs carried out by unauthorised third parties.
  • Do not use this product immediately after unpacking. Wait until it warms up to room temperature before using it.
  • Ensure this product is used in moderate climates only (not in tropical/subtropical climates).
  • Place product on a fl at, stable surface that is not subject to vibrations.
  • Ensure the product and its parts is not overhanging the edge of the supporting furniture.
  • To reduce the risk of fire, electric shock or damage to this product, do not expose it to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing and do not place objects filled with liquids on or near the product.
  • Do not place objects fi lled with liquids, such as vases, on the apparatus.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.
  • Do not place the product where the humidity is high and ventilation is poor.
  • Don’t mount this product on a wall or ceiling.
  • Do not place the unit near TVs, speakers and other objects that generate strong magnetic fi elds.
  • Do not leave the unit unattended when it is in use.
  • Allow at least 30 cm clearance from the rear and the top of the unit and 5 cm from each side. Do not block any ventilation openings of this product. Always ensure that the ventilation openings are not covered with items such as newspapers, table-cloths, curtains, etc.
  • NEVER let anyone, especially children, push anything into holes, slots or any other openings in the unit’s casing as this could result in a fatal electric shock.
  • Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck by lightning, the appliance might get damaged, even if it is turned off . You should disconnect all the cables and connectors of the appliance before a storm.

Maintenance

  • Unplug the power cable from the power source before cleaning the appliance.
  • Use a soft and clean rag to clean the outside of the unit. Never clean it with chemicals or detergent.

Power Adapter

  • To disconnect the unit from the mains supply, unplug the lead from the mains socket.
  • Only use the supplied mains adaptor as failure to do this may result in a safety risk and/or damage to the unit.

Built-in Battery Care

  • Your product is powered by a built-in rechargeable battery.
  • The battery can be charged and discharged hundreds of times, but will eventually wear out.
  • Unplug the charger from the electrical plug and the product when not in use.
  • Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
  • If left unused, a fully charged battery will lose its charge over time.
  • Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and life time of the battery.
  • Always try to keep your device in a cool, moisture-free environment that’s less than 32°C.
  • A product with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.
  • If you plan to store your device for longer than six months, charge the battery to 50% every six months to keep it fresh. Store the device at temperatures between 5 °C and 20 °C.

Battery warning!

  • The battery used in this product may present a risk of fi re or chemical burn if mistreated.
  • Do not attempt to open the product or replace the battery. It is built-in and not changeable. Use of other batteries may present a risk of fi re or explosion and the warranty will be terminated.
  • Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste or in a fi re as they may explode.
  • Batteries may explode if damaged.
  • Charging the battery using supplied charger or under the charging condition specifi ed in user manual. Charging the battery under any other conditions may cause the battery to overhead, emit hydrogen gas, leak, ignite or burst.

CAUTION!

  1. Important safety considerations
    • Do not expose batteries to high temperatures and do not place them on locations where the temperature might increase quickly, e.g. near the fi re or on the direct sunshine.
    • Do not expose batteries to excessive radiant heat, do not throw them into the fi re, do not disassemble them and do not try to recharge un-rechargeable batteries. They could leak or explode.
  2. To prevent deterioration or damage to the battery
    • Do not drop or subject to strong physical shock.
  3. To ensure long battery life
    • Do not discharge completely.

How to remove the battery for disposal
RISK OF INJURY. WEAR GLOVES WHEN WORKING!
The battery should be removed by an authorized Sharp service centre. Not doing so will invalidate any guarantees and warranties on your device.

  1. Remove the metal speaker grille on the front of the unit by gently prising it off with a fl at head screwdriver.
  2. Remove the 7 rubber screw covers on the front of the unit and unscrew the screws using a Philips screwdriver.
  3. Remove 1 screw from the bottom of the front half of the cabinet.
  4. Open the main casing.
  5. Locate the circuit board on the back part of the cabinet.
  6. Remove the 4 screws in the corners of the circuit board which are holding it in place. Lift the circuit board out carefully.
  7.  Disconnect the battery pack connector from the circuit board.
  8. Gently pull the battery pack away from the circuit board by peeling it off the adhesive pad holding it in place.

Disposal of this equipment and Batteries

  • Do not dispose of this product or its batteries as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE in accordance with local law. By doing so, you will help to conserve resources and protect the environment.
  • Most of the EU countries regulate the disposal of batteries by law. Contact your retailer or local authorities for more information.
  • The shown above appears on electrical and electronivcal equipment and batteries (or the packaging) to remind users of this. If “Hg” or ‘Pb’ appears below the symbol, this mean that the battery cantains traces of mercury (Hg) or lead (Pb), respectively.
  • Users are requested to use existing return facilities for used equipment and batteries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals