keji KJ19BT13 Wireless Headphones Instruction Manual

June 6, 2024
keji

keji KJ19BT13 Wireless Headphones

keji KJ19BT13 Wireless Headphones imageThe Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Officeworks Ltd. is under license.

Functions

keji KJ19BT13 Wireless Headphones fig1

  • Volume up: Short press
  • Next track: Long press
  • Multi-function button (MFB) Answer/End calls: Short press once Reject calls: Long press for 2 seconds Play/Pause music: Short press once
  • Volume down: Short press Previous track: Long press Microphone
  • Indicator light
  • USB charging port
  • 3.5mm AUX input

Pack Contents

  1. Wireless headphones
  2. Instruction manual
  3. Quick start guide
  4. 3.5mm audio cable
  5.  USB charging cable

Note: When audio cable is plugged in, the headphones will power off automatically. All buttons will not work. Functions (volume, track skipping) need to changed on the connected device.

Power On/Power Off

keji KJ19BT13 Wireless Headphones fig2

Power On
Press MFB Button for 1 seconds

Power Off
Press MFB Button for 3seconds

Bluetooth Pairing

keji KJ19BT13 Wireless Headphones fig3

  • Press MFB Button for 4 seconds
  • LED will flash red and blue when ready to connect
  • In your device‘s Bluetooth settings activate Bluetooth and select “KJ19BT13” enter the PIN ‘0000’ if needed
  • The blue LED light will flash to indicate the headphone is connected

Calling Mode

keji KJ19BT13 Wireless Headphones fig4

Product Specifications

  1. Bluetooth version: V5.0
  2. Charging voltage :Micro USB 5V
  3. Operating range: 10 metres
  4. Working time :Up to 16 hours
  5. Charging time: Up to 2 hours
  6. Standby time:about 300 hours
  7. Sensitivity: 105±3dB
  8. Impedance: 32 ohm
  9. Max input power: 100mW
  10. Support: HSP, HFP, A2DP, AVRCP
  11. Output power: 15mW
  12.   Battery Capacity: 180 mAh

Charging

keji KJ19BT13 Wireless Headphones fig5

Before using the headphones for the first time, charge it for at least two hours
Low battery alert
When battery voltage is less than 3.3V, a voice prompt will advise there is low battery.
Charging
Red light on
Full charge
Blue light on

keji KJ19BT13 Wireless Headphones fig6

Trouble Shooting

Headphones will not turn on

  • Ensure headphones are fully charged before turning it on.

My mobile device is unable to find the Bluetooth headphones

  • Check that the headphones is in pairing mode (blue/red indicator lights flashing).
  • Remove“KJ19BT13” from Bluetooth settings list and setup again.
  • If still not found, please restart the headphones and phone and try again.

After successfully pairing, headphones disconnect

  • Check the battery level and recharge if low.
  • Ensure headphones are within 10metres of mobile device and free of obstructions.
  • The connection may be affected by obstructions such as walls or other electronic devices. Try moving closer to the device you are connecting to.

When answering a call, I cannot hear anything

  • Ensure the mobile device is connecting to headphones and not in speakerphone mode.
  • Increase the volume on your mobile device.

There is no sound when listening to music

  • Increase the volume on your mobile device.
  • Reconnect the headphones to your mobile device.
  • Check if the app has paused or stopped playback.

Headphones will not charge

  • Check whether the charging cable is functional.
  • Ensure the micro-USB charging cable is fully inserted in the headphones and wall charger ports. Ensure the charging cable and wall charger are functional.

Officework address: Officeworks Ltd. 1 South Drive, 236-262 East Boundary Road, East Bentleigh, VIC 3165

Product Warranty

Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as intended for 12 months from the date of purchase by the original customer.
If the product has any defects or does not work as specified during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:

  • to cosmetic damage;
  • to damage caused by consumables used in connection with the product (such as batteries); where the product has not been used in accordance with all provided instructions;
  • to damage arising from fair wear and tear;
  • where the product has not been subject to reasonable use;
  • where the product has been intentionally or negligently damaged;
    if the customer has attempted to repair the product.

To make a claim under this warranty, please return your product with your receipt or proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the Competition & Consumer Act 2010. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

keji User Manuals

Related Manuals