Shenzhenshi Feilide Keji Youxiangongsi AWKQ0NWFNE Remote For Flexible LED Strip Lighting User Manual
- June 6, 2024
- Shenzhenshi Feilide Keji Youxiangongsi
Table of Contents
Shenzhenshi Feilide Keji Youxiangongsi AWKQ0NWFNE Remote For Flexible LED
Strip Lighting
CPLID TV BACKLIGHT
INSTALLATION
-
Test Your Light
Plug the light into a USB port of your TV, and turn on the TV, the light will on. Pull off the plastic piece on the bottom of the remote, and check it. -
Plan Your Route
Before attaching the strips, measure the area where the strips attach to, plan the route and let the strips to cover all sides of your TV. -
Clean the Mounting Surface
Use the provided wipes to clean the mounting surface. The mounting surface must be solid, oil-free, and dust-free, otherwise, the strips will fall down after a while. -
Attach the Strips
Peel off the protective film from the adhesive strips, and stick the strips from the USB cable side. Please lightly bend the strips to fit along with the TV corners, excessively folding or bending strips will lead to damage. -
Cut the excess strips at the “+GRB” mark. Note: If you have any problems with the light, please feel free to contact us. Email:phlid@foxmail.com
SPECIFICATIONS
Remote Control
- ON/OFF
- 17 SIGNAL COLOUR CYCLE
- 10 KIDS OF SIGNAL COLOR
- Brightness adjust in static color/Speed adjust when light is fade/flash
- Choose a single color, press this, the color will fade/flash.
- 3/7 colors fade I 3/7 colors flash
- Pair/Unpair the lights On dynamic mode, press
- The light will stagnant at the current color press, the light will continue at the current mode.
I bought more than one set of these TV lights, and want one remote to control only one light, how to pair the remote with TV lights?
- Unplug all TV lights from your TV.
- Plug one TV light, and press “ENCODE” synchronously in 3 seconds when plugged.
- TV light will flash once or twice, then paired.
How to unpair?
Repeat the above steps but hold down the “E.NB}Ot” button.
Troubleshooting
TV light still does not work properly? Text and email to phlid@foxmail.com We will fix it.
Service Guarantee:
- We offer a full refund or return if the product is defective within 30 days from the order date. 2, We offer a partial refund or replacement if the product is defective within 180 days.
- We offer 365 days of online customer support. Email:phlid@foxmail.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>