CHAMPION SBT360 Wireless Bluetooth Speaker User Guide
- June 6, 2024
- Champion
Table of Contents
CHAMPION SBT360 Wireless Bluetooth Speaker User Guide
IMPORTANT
All instructions should be read carefully before operation and follow the instructions
- Keep this product and accessories away from excessive heat
- The user should not attempt to repair the speaker. Contact Champion Support for assistance
- No sharp object should be subjected to the speaker/speakers drivers as it may damage the speaker
- Only use soft cloth, no harsh abrasives or chemicals to clean, as it may damage the surface finish
- The power adapter should be unplugged from the power outlet when the speaker is unused for a long period of time.
- Ensure the speaker is waterproof be removing all the connected cables and the cap is tightly closed before exposing the speaker to liquid.
- Do not use the speaker to water while charging, as doing so may result in damage to the speaker or the power source.
- IPX6 – Protection assured against light splashing of water. Must not immerse in water.
Charging instruction
- Please use a 5V/2A power adapter for charging the speaker
- The progressive white LED indicator indicates the battery charging status. The LED will stop blinking once the speaker gets fully charged.
- Speaker can play music while it is charging.
- Charging time may increase if the music played and kept for charging simultaneously.
- Please don’t try to charge the speaker using the Powerbank function.
Product overview
- AUX 3.5mm input port
- Micro-USB input charging mode
- USB-A output powerbank charging port
Bluetooth Pairing
- Step 1: Long press for 3 seconds to power on. The speaker goes to Bluetooth pairing mode automatically. The blue LED blinks.
- Step 2: Find SBT360 in your Bluetooth name list and select it.
- Step 3: 2 prompt tones and the LED stays blue, the pairing is successful.
AUX-IN connection
The speaker features 1 AUX audio in port, simply connect the speaker with your mobile phone/MP3 Player/PC/Laptop with 3.5mm jack audio cable. The status LED indicator will turn green and you can play music via wired connection.
Powerbank function
Connect your mobile phone with a USB cable to power up your phone. The battery is total 4400 mAh and support approximately 1-time single charge.
Note: using the powerbank will affect the speakers play time.
Pairing two speakers
(TWS function, optional with another speaker of the same model).
SBT360 can be played as a single speaker or as a true wireless stereo speaker (2 speakers connected with each other).
TWS paring:
- If you purchase an additional SBT360, you can pair them together for optimal stereo sound by following steps:
- Make sure that your device is not connected to either speaker.
- Turn on both speakers and short press the TWS button on both speakers. The LED indicator will flash white, the two speakers will automatically pair and the LED indicator will stay lit.
- Please follow the Bluetooth pairing steps.
(Note: both speakers will appear in your Bluetooth model list, connect to either of them).
Disconnect the TWS paring:
Long press the TWS button on either of the speaker to enter single speaker mode.
Buttons
Bluetooth mode
Long press for 3 seconds to Power ON/OFF; Short press it to check the battery
status.
Short press to Play/Pause. For incoming calls, short press to pick up/hang up;
Long press to reject the incoming call.
Short press for volume up; long press for next track.
Short press for volume down; long press for previous track.
Short press to disconnect Bluetooth connection.
AUX-IN Mode
Long press for 3 seconds to Power ON/OFF; Short press it to check the battery
status.
Short press for volume up
Short press for volume down
LED indicator
Three different LED indicators, one for power bank and battery status, status mode and TWS connection. (Status mode LED indicator, Powerbank and battery status indicator, TWS LED indicator)
Power bank and battery status LED indicator
Progressive white LED indicator, 4 the LED’s provided for the battery status. 1 light indicates 25% battery charged, 2 light indicates 50% battery charged, 3 light indicates 75% battery charged, 4 lights indicates fully charged.
When the speaker acts as a powerbank the LED light indicate the battery life. 4 lights indicates 100% battery life, , 3 light indicates 75% battery life, 2 light indicates 50% battery life, 1 light indicates 25% battery life.
Status Mode LED indicator
- BT mode – Blue LED blinking for pairing mode, blue LED constant paired mode.
- AUX mode – Green LED constant
TWS LED indicator
- White LED blinking on both speaker for TWS pairing
- White LED constant on both speakers indicates TWS pairing successful.
Specifications
Product Name
| SBT360
---|---
Bluetooth-version|
4.2
Transmission Distance
| 10m
Driver units|
4Ω 10Wx2=20W (RMS 8Wx2=16W)
Battery Capacity
| 4400 mAh
Audio input|
3.5mm AUX-IN and Bluetooth
Play time
| 15 hours (50% volume)
Charge time|
4-5 timer (input 5V=1.5A)
S/N ratio
| ≥ 75 dB
Handsfree|
Supported
TWS
| Supported
Product size|
223x100x42mm
Declaration of conformity
Hereby, Order Nordic AB – ChampionⓇ declares that the product SBT360 is in compliance with Directive 2014/35/EU and 201430/EU. The full text of the EU declaration of comfirmity is available at the following internet address: order.se/ champion
Warranty & Customer Support
12-month limited warranty
Lifetime technical support
For FAQs and more information, please visit
Web: order.se/Kundtjanst/
Email: info@champion.se
Tell: +46 42 25 23 00
Champion
Makadamgatan 14 | 254 64 Helsingborg | Sweden
www.champion.se
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>