HARPER HB-517 TWS Headphones Instruction Manual
- June 6, 2024
- HARPER
Table of Contents
HARPER HB-517 TWS Headphones Instruction Manual
SAFETY INSTRUCTIONS
- Do not disassemble device by yourselves. It may lead to malfunction of device.
- In case of any malfunction please contact authorized service center.
- Do not lead device and accessories unattended. Please keep them out of reach of Children and pets. Small parts can cause suffocation.
- The device is supposed to be used in normal climate conditions. Extreme climate conditions (temperature below OC and above 45C, too high level of humidity) can cause malfunction of device and wreck electronic components of device.
- Protect device from water, do not touch it with wet hands.
Information about restrictions on the use of technical equipment. taking into account its purpose for work in residential, commercial or industrial areas. The equipment is designed to work in residential and commercial areas. public places. industrial areas with small and medium power consumption, without exposure to harmful and dangerous production factors. The equipment is intended for operation without the constant presence of maintenance personnel.
REOUIREMETS TO TRANSPORTATION
Transportation of equipment should be carried out in the original packaging in covered vehicles by any means of transport.
Important!
Electrolyte teakage may occur if the battery is not used correctly. To prevent leakage: 1. Charge the device with the built-in battery at ambient temperature from + 10 – +40C. 2. Do not heat the battery above + 60C, direct sunlight on the device. Do not throw into the fire. 3. Charge your device regularly, even when not in use (1 time per month).
Appointment
These headphones are designed as an accessory for mobile devices with Bluetooth support. They are designed for wireless transmission of audio data: talking on the phone, listening to music files.
Complectatlon
- Charging case
- Earbuds (L-left. R-right)
- USB-charging cable
- Silicon ambushures (big, middle, small)
- Instruction manual
General appearance
Charging and indication
When using for the first time, it is recommended to fully charge the
headphones and the case. To charge the headphones, simply place them in the
case according to the label, in the left compartment of the earphone marked
(L) in the right compartment marked «R» and close the cover.
It is recommended to use the supplied USB cable connected to the power supply
to charge the case. If headphones are installed in the charging case, the
headphone battery will be charged at the same time as the case.
In the case of charging using magnetic holders for the earbuds.
Indication on the case
The charging case has four green led indicators showing the battery level, each green indicator shows approximately 25% of the full charge.
| Charging case | Indication |
|---|---|
| Low battery | One green indication light flashes |
| Full battery | All 4 green indicators light one by one |
| Charging | The green light corresponding to the charge level flashes |
Earbuds indication
| Earbud | Indication |
|---|---|
| Charging | Red indicator lights |
| Full battery | Blue indicator lights |
On and off
Remove the headphones from the charging case, the headphones will turn on automatically. If the headphones are outside the charging case and turned off, hold your finger on the touch panel for 3-4 seconds until the blue indicator flashes. To turn off the headphones, place them in the charging case or touch and hold the touchpad on the headphones for 4-5 seconds. The indicator will blink three times in red and the headphones will turn off.
Connecting to a mobile device
To connect to a mobile device in automatic mode, remove the headphones from the case. The headphones will turn on, the indicator will flash, blue. For 3-4 sec. the headphones are automatically synchronized with each other (during synchronization, the indicator flashes blue). After a successful connection, the display on the left earpiece will be alternately blue/red (pairing mode). Turn on the Bluetooth function on your mobile device and search for new devices. In the list that appears, select HB-517 and connect the headphones
To connect to a mobile device in manual mode (headphones off). Touch and hold the touchpad for 2-3 seconds. the headphones will turn on, synchronize with each other and enter pairing mode automatically (blue/red indication on the left earpiece). Turn on the Bluetooth function on your mobile device and search for new devices. In the list of devices that appears, select HB-517 and connect the headphones.
HB-517 headphones can be used separately on different mobile devices.
Notes:
- When turned on, the headphones connect to the last connected Bluetooth device automatically.
- If you need to connect the headphones to another device, turn off Bluetooth on the device with which the headphones were paired. The headphones will be discoverable and ready to pair with the new device. Or manually enter the left earpiece into pairing mode by touching and holding the touchpad for 5-7 seconds., until the red-blue alternating indication appears, and connect the earphone to another mobile device. After connecting the left earpiece, turn on the right one by holding the touchpad for 2-3sec., the earphones are synchronized with each other automatically.
- If the headphones are not synchronized with the device for 10 minutes, it will automatically turn off.
- If the headphones are not detected, make sure they are in pairing mode (the indicator blinks alternately blue and red).
Management
Play / pause music playback In music playback mode, a single touch on the touchpad pauses playback. A second tap will resume playback.
Switching tracks
To switch to the next track in the playlist, double-tap the touchpad on the right earpiece quickly. To switch to the previous track in the playlist, tap the touchpad on the right earpiece three times quickly.
Volume control
Volume control during playback of audio files is made by double-tap (volume
up) and triple-tap (volume down) of the touch panel of the left earpiece.
Calling voice assistant In standby mode, touch and hold the touchpad for 3
seconds. to call the voice assistant (the mobile device and the software
preinstalled on it must support the voice assistant function). Making phone
calls using a headset. Receive / end/reject incoming call To receive an
incoming call, tap the touchpad once. To end a call, hold the touchpad for 2-3
seconds. To reject an incoming call, touch and hold the touchpad for 2-3
seconds.
Dialing the last call
To dial the last phone number in the call list, briefly touch the touchpad on the right or left earpiece four times.
Restoring synchronization between the headset
turn off the earphones and press the both earphones for 5 seconds until red and blue flash, quick click four times for both earphones, you will listen Beep voice, then it means reset successfully; or 2): quick double click one of the earphones, you will listen Beep voice, wait for 3 seconds, it will auto paired.
Technical parameters
Farhtiric
Battery: 50mah
Bluetooth Version: V5. 0
Speakers: 1 x 5mm 14 Ohm
Speaker frequency response: 20Hz-20kHz
While working in the mode of listening to music up to 5h (at average volume
level) Charging time up to 1H
Bluetooth Protocol: HSP/HFP/A2DP/AVRCP
The type of Bluetooth audio codec:SBC, CVSD, HID.
Weight: 4.7 g (one)
Dimensions: 22×16, 7×26 mm
Charging case
Battery capacity of charging case: 600mAh
Charging: Charging via USB adapter: 5V-1A Charging time 4.5 h (depending on
the source used, the time may vary)
Weight: 48.5 g (without earphone)
Dimensions: 72x45x33, 3 mm
This device is designed and made of high quality materials and components, which can be recycled and reused. The symbol means that electrical and electronic equipment must be disposed of separately from household waste after use.
Information about certification
The products passed all the assessment procedures established in the technical
regulations of the Customs Union and the Eurasian Economic Union. Production
date is indicated on the gift-box Life duration of product: 24 months Warranty
period: 12 months
Warranty service is provided on the base of warranty card that goes together
with the product.
Warranty card and User manual are integral parts of the product. For
additional information about the product and authorized service centers you
may find at www.harper.ru or by telephone
8-800-600-7107.
Manufacture: Harper International Trading Limited 15F, Radio City, 505
Hennessy Road, Causeway Bay, HongKong, PRC Made in China
Importer/claims organization: LLC «Progress-Plyus», App.11, floor 2, Build.50,
k.1, Udaltsova St., Moscow, Russia, 119607, tel.: +74951330210, email:
[email protected]