pTron Rover Wireless Mono Headset Instruction Manual
- June 6, 2024
- pTron
Table of Contents
- pTron Rover Wireless Mono Headset Instruction Manual
- Headphone Overview
- Headphone Wearing
- Wearing the headphone:
- B. Multi-point connection.
- C. Making/answering calls:
- D. Play/Pause/Volume control/Previous/Next:
- Charging Feature
- Technical Specifications
- Sound fiber web.
- Disclaimer
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
pTron Rover Wireless Mono Headset Instruction Manual
Headphone Overview
Headphone Wearing
Operation:
A. First pairing :
- Move the power switch to position, and the unit enters pairing status when the red LED and blue LED flash alternately. It means pTron Rover is ready to pair.
Wearing the headphone:
-
Turn on Bluetooth on the mobile phone, and set it to scan for devices iPhone: Settings > General > Bluetooth > On
Android TM phone: Settings > Wireless & Networks > Bluetooth: On > Scan devices
Note: The menu depends on the mobile phone’s OS. -
When the Bluetooth headphone pTron Rover is found, the system prompts “Pairing” until “connected”.
Note: If your headset is un-paired or disconnected from your device, please restart the headset and follow the pairing process again.
B. Multi-point connection.
- When the headphone and the mobile phone are paired, you may want to pair the headphone with another or a new mobile phone. In this case, turn off the
Bluetooth on the mobile phone, turn off the Bluetooth headphone and then pair with another mobile phone.
When paired, turn on Bluetooth on both mobile phones and it will connect to both phones automatically.
C. Making/answering calls:
-
Answer/reject manually:
When there is an incoming call, the system reports the caller number (requires phone support), and you can tap the button to answer the call or press and hold it to reject the call. -
Answer/reject via voice:
When there is an incoming call, you can say “YES” to answer the call or say “NO” to reject the call. This feature depends on the mobile phone’s OS.
Note: Voice control may be unavailable in noisy environment. -
Callback:
Press the button twice consecutively to call back the last call. -
Voice assistant/Voice dial:
Press the button once to activate voice assistant. You can use voice assistant to dial number (requires phone support, i.e. the phone supports voice search).
D. Play/Pause/Volume control/Previous/Next:
- Play/Pause: In music playing state, press to pause, and tap it again to resume playing.
- Volume control: In music playing state, move & long press the button to adjust the volume.
- Previous/next: In music playing state, move & short press and the button to select previous/next track.
Charging Feature
When the unit is being used, the system will beep four times in the interval
of 5 minutes. When the unit prompts “Turn off”, it requires charging. The red
LED is on when the unit is being charged, and the blue LED is on when fully
charged.
Note: If the headphone won’t be used for long time, please charge it at least
once every month to avoid damage.
Technical Specifications
Bluetooth 4.2 dual-module chip.
Support voice dialing (requires phone support).
Support music playing control/next song/previous song, and automatic switch
when there is incoming call. Support dual pairing.
Bluetooth profile supports advanced audio transfer protocol (A2DP), remote
audio control (AVRCP), broadband handsfree v1.6 (HFP), headphone v1.2
(HSP), secure simple pairing (SSP2) Noise and wind noise reduction activates
digital signal processing (DSP). Internal adaptive 5-segment equalizer.
Stainless steel wind screen.
Sound fiber web.
Support various smart phones and tablet PCs.
Transmission Range: Up to 10m from the paired device
Frequency Response: 20Hz-20khz
Impedance: 32ohms
SNR: 85dB
Talk time/Music Playtime: Up to 8 hours*
Battery Capacity: 90mah
Charging Time: 90 min.
Standby Time: 200 Hours
Weight: 60g
Wall charger: 100-240V
Power supply: 5V DC, 180mA
Operating temperature: 32°F-104°F (0-40°C)
Storage temperature: 32°F-104°F (0-40°C)
Charging temperature: 32°F-104°F (0-40°C)
Disclaimer
The colors and specifications shown/mentioned in the user manual may differ from the actual product. Images shown are for representation purpose only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>