DAS 4 Smartwatch ST08 User Manual
- June 6, 2024
- DAS 4
Table of Contents
ST08
USER MANUAL
Package: One gift box, one user manual, one smart band unit.
Remark: The product is waterproof (IP68), You can wear it while washing hands
and, in the rain,
– Seawater is prohibited.
Do not use the product when having a hot shower. The steam will penetrate the waterproofing and will cause the circuit to burn. All these are beyond the scope of the warranty.
Buttons Instruction:
Top button: Keep the button pressed for a few seconds to power ON/OFF the
device. Short press the button when the device is ON, to light the screen.
Bottom button: Flashlight turn ON/OFF Touch instructions: swipe up to
return to the home screen; slide down to enter the status ba slide left to
enter the notification center slide right to enter the main menu.
Changeable band: A switch at the connector
between band and watch case, push it to the middle to take off the existing
band, same way to set a new band.
Charging instruction: this product adopts is using magnetic force charging. Supports 5V mobile phone charger and computer USB interface. Put the charging cable to the back of the device’s charging pins, it will charge automatically. It usually takes 2 hours to fully charge and the device’s standby time up to 30 days, 5-10 days for working. Do not use the watch when charging.
You should place the magnetic charger correctly at the pins. If the charger is not properly aligned with the pins, it will cause the circuit to burn.
The watch can connect with your phone by downloading the application “FitCloud PRo” using one of the methods below:
- Android / IOS: Scan the QR code using any scanner, to download the app “FitCloud Pro
http://fitcloud.hetangsmart.com/qrcode/cn/
- Android: search and download “FitCloudPro” app from Google Play; iOS: search and download “FitCloudPro” app from Apps Store; After installation, turn on phone Bluetooth and FitCloudPro App, confirm the notifications and all others permission “FitCloudPro,” asks are enabled, and fill up personal information. Tap “Add device”, search “L15” device (turn on the GPS in the smartphone before binding) and tap connect. How to set the notification reminder: In “FitCloudPro” –
Device – Notifications, select the corresponding Apps, turn ON the switch. What should do if I don’t receive the notifications?
- For the watch to be able to display notifications from your phone, it must be connected to your phone through the app. Once connected, select which notifications you want your watch to display through the app.
- If still not receiving any notification after step (1). Reset the watch to factory setting, enter the Bluetooth settings in the phone, and check if it’s connected device “L15”. If so, please unpair, turn OFF the phone’s Bluetooth, then turn it ON again to reconnect.
- If all the above 2 steps cannot solve the notification issue, uninstall the “FitCloudPro” and download it again. Remember to give all the required permissions when prompted.
Firmware upgrade: When Bluetooth is connected, in “FitCloudPro”, Tap “Device- Firmware version”- it will remind you if there’s a new version available for update. During the updating, it will show a process bar, wait until the process is completed. the watch will restart and reconnect to the phone App. Do not operate the watch during the update. It takes 3-5 mins.
Main Features:
Language/Time/Date
These settings will be synchronized when you successfully connect the watch
with your smartphone.
Standby watch faces:
You can change the watch face by pressing on the screen for 2 seconds and then
selecting the watch face you want.
Status Bar:
Swipe down from the standby state screen. The following will be shown
Bluetooth connection status/battery status/brightness adjustment/ QR code for
FitCloudPro download.
Notifications:
Synchronizing and display of app notifications such as Facebook, WhatsApp,
SMS, Email, etc., between the mobile phone and the SmartWatch. Up to 8
notifications can be displayed on the watch. Please adjust the settings in the
Fundo app and allow notifications to be displayed (app permissions). It is You
able to decline incoming calls via the watch.
Activity info:
Showing the workout and health data including Steps, Distance, Calories
consumption. This data will be saved until midnight (12:00 am) every day and
then reset to 0 values for the coming day. You can look up previous data in
History.
Exercise:
Select a sports mode to record your workout. Tap this icon for more modes,
tap center to enter, tap ****next/back page, tap return. The recording
will be paused when pressing the power button. You can choose to save, delete
or continue the measuring. Take a single measurement of your heart rate. You
should see a green light being emitted from the bottom of the watch. For
average BPM you should consult your doctor as normal BPM can differ according
to your age, gender, and physical condition. Please note: The device is not a
medical device. Any values shown are for reference only.
Blood Pressure Function: Please put your hands flat on a surface and do
not move. When this function is activated it needs about 45 – 50 seconds of
measuring and reading to provide a result Please note: The device is not a
medical device. Any values shown are for reference only.
Electrocardiogram (ECG) Function:
The device combines an optical heart rate sensor and ECG sensor to show
information about the user’s heart function for reference. When this function
is activated it needs about 30 seconds of measuring and reading to provide a
result at the App to review. Please note: The device is not a medical device.
Any values shown are for reference only.
Blood Oxygen Function:
Blood oxygen (SP02H) level is the amount of oxygen circulating in the blood.
Please refer to information about healthy or abnormal blood oxygen percentage
for your age group and gender online and/or ask your medical practitioner for
advice. Please note: The device is not a medical device. Any values shown are
for reference only. Sleep monitor: Sleep monitoring will be automatically
active from 10:00 pm to 8:00 am the next morning. You can check the details of
sleep quality with the Fundo app on the phone.
Stopwatch Function:
Press the start and pause, again press for stop.
Remote Control (Music):
Allows to activate and control music playback on the phone via the Smart Watch
(a music playback app should be installed on the phone).
About: Check model number, Bluetooth address, version number
Reset: Tap to reset all data (factory mode).
Alarm Function: You can set several alarm times via the Fundo app on the
phone.
Sedentary, drink reminder: Via the App set a time for exercise and/or a
reminder to drink.
Find Phone Function: As the device and phone are connected, the Find
Phone Function can support locating your mobile phone. Tap “Find Phone” and
locate your phone via the ringtone/sound coming from your phone.
Wrist Wakeup: You can “wake up” the watch with wrist movement. Please
enable this function with the app. Please note that this might increase power
consumption.
Normal Wear and Tear
Normal wear and tear of the product or parts of the product are not covered
by this warranty.
Not Included in the Warranty Terms This warranty does not include:
- Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or attempted repair by a person not authorized by the distributor.
- Any product that has not been installed, operated, or maintained in accordance with the manufacturer‘s instruction manual provided with the product.
- Any product that has been used for purposes other than the intended use.
- Any damage caused by improper power input or improper cable connection.
IP68: Only dustproof and only accidental contact with freshwater – hand
washing.
Seawater is prohibited.
www.das-4.com