Fotopro FS13-2A3SI LUMIS Glow RGB Instructions
- June 6, 2024
- Fotopro
Table of Contents
LUMIS Glow RGB
Basic parameters:
Input: 2025 Button battery 3V
Output radiofrequency: 433MHZ
Product Structure:
This product is A remote control. The four keys are mode, RGB, plus, and Minus
respectively. There are five modes in the mode key,
A: Mode 1: M1 has 7 modes. Press + or — the key to select 7 mode lights such
as bar light, birthday candlelight, pink scene light, forest light, sea blue
light, alarm light, lightning light, etc. Press the RGB key and then press +
or — the key to adjusting the light brightness from 0% to 100%.
B: Mode 2: RGB seven color gradient, press + or – to adjust the change speed,
press RGB and then + or – to adjust the light brightness from 0% to 100%.
C: Mode 3: Red, green and blue Press + or – to adjust the brightness.
D: Mode 4: Press + or – key to having 5 lighting effects such as shadow lamp,
cloudy lamp, sunshine lamp, fluorescent lamp, and bulb lamp. Press the RGB key
and then press + or – key to adjust the lighting brightness from 0% to 100%.
E: Mode 5: Press + or – to adjust the color temperature from 3000K to 6500K,
press S, and then + or – to adjust the brightness of the light from 0% to
100%.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>