Wireless Chargers Q400 ExCorn Wireless Charger Block User Manual

June 6, 2024
Wireless Chargers

ExCorn
Wireless
Charger Block
User Manual

User Manual
Thanks for choosing us!
This is a wireless charger for Qi-supported smartphones. lt will enable you with a better charging experience and allow you to enjoy the fun of digital products easily. Please read the manual carefully before using this product, and keep properly this manual for possible future reference.

Wireless Chargers Q400 ExCorn Wireless Charger Block

The wireless charger combines a Charger Stand and a Charger Mat with magnets, they can either work together or separately.

Con neet to Wall Adapter

Wireless Chargers Q400 ExCorn Wireless Charger Block - Con neet to Wall
Adapter

  1. Plug the adapter into the wall socket.
  2. Plug the USB into the adapter and the USB-C into the charging stand and hold the mat and stand together so you can use them at the same time.

Wireless Charger Stand work-a lone mode and its LED indication.

Wireless Chargers Q400 ExCorn Wireless Charger Block -s LED
indication

When powered on, the LED indicator shines in BLUE for 5 seconds then lights off and enters into Standby Mode. When a wireless charging enabled mobile phone is being placed on the charger, LED will indicate the different modes in below fashion, Charging: LED will shine constantly in GREEN  during the whole charging process.
fully charged:

  • For Samsung, LED off
  • For iPhone, LED in continuous green.

FOD/Malfunction: LED blinks in GREEN & BLUE in turns at a 0.5 pace

Charger Mat work-alone mode and its LED indication.

Wireless Chargers Q400 ExCorn Wireless Charger Block -Charger Mat work-alone
mode

When powered on, the LED indicator shines in BLUE for 5 seconds then lights off and enters into Standby  Mode. When a wireless charging enabled mobile phone is being placed on the charger, LED will indicate the different modes in below fashion, Charging:  LED will shine constantly in GREEN during the whole charging process. FullyCharged:

  • For Samsung, LED off
  • For iPhone, LED in c continuous green.

FOD/Malfunction: LED blinks in GREEN & BLUE in turns at a 0.5 pace.

Product Specifications

Input (DC): 5.0V/2.0A; 9.0V/2A
Output: SW/7.SW/l0W(self-adjustable)
Frequency: ll0-205Khz Conversion Rate: 72%
Dimension: 84.8143.7123.6mm
Warning

  1. Do not squeeze or collide.
  2. Do not disassemble or throw into fire or water to avoid causing a short circuit.
  3. Do not use the wireless charger in an extremely hot, humid, or corrosive environment.
  4. Do not use near magnetic bank card or IC card to avoid malfunctioning.
  5. Please keep a minimum 20cm between implantable me-dica! devices (pacemaker, implantable cochlear, etc) to avoid potential interference with the medica[ device.
  6. Keep out of reach of children and pets.

The images in this manual are sketch drawings of the actual products only, actual product might be slightly different.

Package including:
o Wireless Charger Stand
o Wireless Charger Mat
o 100cm Power Cable
o User Manual.
Power Adapter is not included, please purchase separately if needed.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals