DAS-4 SG40 Smartwatch Chronograph Black Silicone Strap User Manual
- June 6, 2024
- DAS 4
Table of Contents
DAS-4 SG40 Smartwatch Chronograph Black Silicone Strap User Manual
- On/Off key
- Display
- Watch strap
Charging Method
- Before using the watch for the first time, charge it for 2 hours and ensure it is fully charged.
- Charging with a Magnetic Charging Cable: Charge the product with a magnetic charging cable in the direction shown in the figure below.
Installing the APP
According to the operating system of your mobile phone, scan the corresponding QR code or enter “app store” or Android app market to download “GloryFit” and install it.
System Requirements: Android 4.4 or above; IOS8.0 or above. Supporting Bluetooth 4.0 or above.
Binding the Watch
- Turn on the Bluetooth of your mobile phone.
- Turn on the APP – click “Add Device” – Search – click the corresponding Bluetooth name searched — the watch is successfully bound
Operating Instructions
Definitions of Keys
On/Off Key: On any screen, press it for 3 seconds and the Shut Down Confirmation screen will pop up. Press it shortly to return to the main screen. Operation: Swipe the screen to the left or right to switch between screens. If the current screen has sub-screens, click an icon to enter the corresponding sub-screen. Swipe the screen to the right to return to the previous menu.
Synchronizing Information
After the watch is successfully bound with your mobile phone, the watch will adjust the time automatically and at the same time immediately synchronize and record your sports information and health status.
Main Functions
Clock, Step Count, Distance, Calorie, Sleep Monitoring, 24-hour Heart Rate Monitoring, Call Reminder, Alarm Clock, Excessive Sitting Reminder, Notification, etc.
Multiple Languages
Languages in the Watch: 11 languages, i.e. Chinese, English, Japanese, German, Italian, French, Spanish, etc.
Languages in the APP: Russian, Indonesian, German, Italian, Czech, Japanese, French, Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Arabic, Korean.
Power off and Reset
Press the side key for 3 seconds to turn on the watch and enter the main screen. Swipe the screen upwards to enter the Settings screen. Click “Settings” to enter the Settings List. Select Power off or Reset.
Switch between Screens
There are a total of 3 screens. Press for 3 seconds to enter the main screen. Swipe the screen to the right and select a new screen. Return to the main menu and switch between screens.
Step Count
The number of steps, distance and calories are recorded. The data are cleared at midnight and will be recounted on the new day. At the same time, the historical data are saved and uploaded to the APP.
Heart Rate Monitoring
Enter Heart Rate Monitoring and the light will keep flashing. 10 seconds later, the monitoring data will appear and be synchronized in the APP. Swipe the screen and the monitoring will stop. You can set 24-hour continuous monitoring in the APP.
Sleep Monitoring
The sleep state of last night is recorded. Your sleep is monitored only when you wear the watch. The time can be set to 8:00 p.m. to 12:00 noon the next day.
Sports Mode
There are a total of 6 modes for selection.
Press the sport you want to enter its function. Your sports data are recorded in detail (heart rate, calories etc).
Settings
Find Mobile: Click “Find”. If your mobile phone is connected to the watch, your mobile phone will vibrate. Brightness Control: The watch has 4 brightness levels. Click “Brightness” to increase the brightness level. The default brightness level of the watch is level 2. Product Information: Bluetooth name, Bluetooth address and version number.
Notification
It is turned on in an the APP. There are 21 APPs for selection, such as WeChat, QQ, Facebook, WhatsApp, Twitter, Line, etc. Only when the watch keeps is connected to your mobile phone and Notification is turned on will the watch receive notifications.
Call Reminder:
It is turned on in the APP. You can set “Delay Reminder” and “Reject Call”. The contact person or phone number of the caller is displayed when a call is coming.
Excessive Sitting Reminder:
It is turned on in the APP. You can set the start time, end time and interval of reminder.
Alarm Clock:
It is turned on in the APP. When the time set arrives, the watch will vibrate to remind you.
Raise Wrist to Light up Screen: It is turned on in the APP. Only after it is turned on will the screen be lit up when you raise your wrist.
Do Not Disturb Mode: It is turned on in the APP. You can set the start time and end time. After the mode is turned on, the watch will turn off “Vibration”, turn off “Raise Wrist to Light up Screen” and turn off “Notification”.
Shake to Take Pictures: It is turned on in the APP. When you raise your wrist with the watch, your mobile phone will take a picture after countdown from 3 to 1.
Find Watch: It is turned on in the APP. The watch will vibrate.
SMS Reminder: It is turned on in the APP. When your mobile phone receives an SMS, the watch will remind you synchronously.
Duration of Bright Screen : It is turned on in the APP. You can set the Duration of Bright Screen to 5s, 10s or 15s.
Time System: It is set in the APP. You can set 12-hour time system or 24-hour time system.
Device Language: It is set in the APP. There are 18 languages for selection.
Basic Parameters
Master Chip: Realtek8762C
Battery Capacity: 160mAh (polymer)
Display: 1.28” TFT Display
Working Time: 5-7 days
Resolution Ratio: 240240dpi
Synchronization Method: Bluetooth 4.0 Product
Weight: 48g Working Temperature: 10℃~50℃
Product Size: Diameter 44.59.8mm Packing
List: Main machine, magnetic charging cable,
and User’s Guide Material of Wrist Strap: TPU
Compatibility: IOS 8.0 + Android 4.4
FAQs
-
Why the watch cannot be searched or connected at the time of binding?
a.Please check that your mobile phone’s Bluetooth has been turned on and ensure that the distance between the watch and your mobile phone is within 0.5 5m.
b.Please check whether electricity exists in the watch. If, after the watch is charged for 2 hours, the problem cannot be solved, please contact us. -
Why the Bluetooth cannot be connected occasionally?
The Bluetooth service of some mobile phones becomes abnormal occasionally at the time of restart. Usually the Bluetooth can be connected normally after your mobile phone is restarted. -
Why an Android mobile phone is disconnected easily?
The system memory management of an Android mobile phone turns off the APP on the backstage forcibly. You need to turn off the power saving mode or drag the APP to the green backstage of the FPT System Manager, then the APP will not be turned off forcibly. When the APP is running on the backstage, the Bluetooth will not be disconnected automatically.
Precautions
- Never seriously impact the main machine.
- Never allow the product to be in contact with chemicals, such as benzene, diluent, etc.
- Do not allow the product to be near a high-intensity magnetic field, power station, etc.
- Please avoid direct light or heat generation devices.
- Never disassemble, repair or alter the product.
- Please dispose disused packages, batteries and electronic products properly by category.
Why the watch cannot receive push notifications?
Settings of an Android Mobile Phone:
- Check that the push notifications switch on the mobile phone client has been turned on.
- Check that messages can be displayed normally on the notification bar of your mobile phone.
The push notifications of the watch are pushed by reading the messages on the notification bar of your mobile phone. If there are no messages on the notification bar of your mobile phone, the watch cannot receive push notifications. (You need to find “Notification Settings” in the Settings of your mobile phone and turn on the Notification switches of WeChat, QQ, phone, SMS and mobile phone client.)
Settings of an iPhone:
- Check that the push notifications switch on the mobile phone client has been turned on.
- Check that messages can be displayed normally on the notification bar of your mobile phone. (You need to find “Notification Settings” in the Settings of your mobile phone and turn on the Notification switches of WeChat, QQ, phone, SMS and mobile phone client.)
Disclaimer
Warning: The product is not a medical device. The watch and its APP are not intended to be applied to diagnose, treat or prevent diseases or symptoms. To change your habit, such as exercise habit, etc., be sure to consult qualified professional medical personnel to avoid causing casualties. The Company reserves the right to modify or improve any function described in the Guide without prior notice. At the same time, the Company reserves the right to keep the contents of the product updated. All the contents are for reference only.
IP68 – Only dustproof and only accidental contact with fresh water – hand washing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>