DAS-4 SG18 Black Silicone Strap Smartwatch User Manual
- June 6, 2024
- DAS 4
Table of Contents
DAS-4 SG18 Black Silicone Strap Smartwatch User Manual
Operation Guide:
Home button : Long press the button to power ON/OFF, short press the button to lighten the screen.
Touch instructions: Tap to enter and swipe right to return; Slide down enter the status bar under the home screen; slide right to enter the Multiple sport mode; slide left to enter the main menu; slide up to notification center.
Changeable band: A switch pin at the connection between watchcase and band, slide it to the middle to take off/on the band.
Charging instruction: this product is using magnetic force charging. Supports 5V mobile phone charger and computer USB interface. Put the charging cable to the back of the device’s charging pins, it will charge automatically. It usually takes 2 hours to fully charge and the device’s standby time up to 30 days, 5-10 days for working. Do not use the watch when charging.
You should place the magnetic charger correctly at the pins. If the charger is not properly aligned with the pins, it will cause the circuit to burn.
The watch can connect with your phone by downloading the application “Wearfit 2,0” using one of the methods below:
1)Android / IOS : Scan the QR code using any scanner, to download the app “Wearfit 2,0 Pro”.
2)Android Phone: search and download “ WearFit 2.0” app from Google Play;
iOS phone: search and download “ WearFit 2.0 ” app from Apps Store;
After installation, turn on cellphone Bluetooth and “ WearFit 2.0 ” App, confirm the notifications and all others permission “ WearFit 2.0 ” asks are enabled, Bind bracelet, find “S20” device (Some phone brands need turn on the GPS in the smart phone before binding) and tap connect.
● Firmware upgrade: When Bluetooth is connected, in “WearFit 2.0”, Tap Mine- “Device management” – “Firmware update”, if there is new firmware available, click to update to the latest watch firmware version.
Notice: If it is unsuccessful to upgrade, please wait for the watch to run out of battery. Charge again and then reboot the watch again, search Bluetooth device Huntersun-BLE connect and upgrade again.
Due to Bluetooth versions being different in different smartphones, should you face connectivity issues, restart the bluetooth service and try to connect again.
Main Features:
● Language/Time/Date: These settings will be synchronized when you successfully connect the watch with your smartphone.
● Standby watch face: You can change the watch face by pressing on the screen for 2 seconds and then selecting the watch face you want.
● Status bar: Slide down to enter the standby interface with Bluetooth status, QR code (scan with mobile phone and download “WearFit 2.0”), brightness adjustment and battery charge
● Notifications : Slide right into the notification, notifications synchronous from phone, such as calls, WhatsApp, SMS, WeChat messages, recent 8 alerts can be shown, when calls and messages are coming, the watch will vibrate. remind, support decline a call. You can also decline a call directly from your watch.
● Pedometer, Distance, Calorie: Monitoring daily steps, mileage, calories. Reset at 12 o’clock each day. Supports 7 days of records data in the watch.
● Sports: Multiple sports-mode, select one to start, slide right to pause
the exercise. It records duration, calorie consumption and
heart rate etc. data.
Heath care:
● Heart rate: When this function is activated, the heart rate is being measured by the device scanning the surface capillary of the skin with green optical diodes. Please allow for about 2 seconds to start measuring and recording. Slide to other menus to stop measuring. The average BPM depends on your age, gender and physical condition. Please refer to your doctor for further information
Please note: The device is not a medical device. Any values shown are for reference only
● Blood pressure: please put your hands flat on a surface and do not move. When this function is activated it needs about 45 – 50 seconds of measuring to provide a result Please note: The device is not a medical device. Any values shown are for reference only
● ECG: The device combines an optical heart rate sensor and ECG sensor to
show information about the user’s heart function for reference. When this
function is activated it needs about 30 seconds of measuring and reading to
provide a result.
Please note: The device is not a medical device. Any values shown are for
reference only.
● Blood Oxygen: Blood oxygen (SP02H) level is the amount of oxygen
circulating in the blood. Please refer to information about healthy or
abnormal blood oxygen percentage for your age group and gender online and/or
ask your medical practitioner for advice.
Please note: The device is not a medical device. Any values shown are for
reference only.
● Sleep monitor: Sleep monitoring will be automatically active from 10:00pm to 8:00am the next morning. You can check the details of sleep quality with the WearFit2.0 app in the phone.
● Stopwatch: Press the start and pause, again press for stop.
● Remote control music: Play the music at phone side, control at the watch side.
● Remote camera: Enter WearFit 2.0, tap + enter the camera function, shake the watch to take a photo.
● About: Tap to enter, check device model, firmware version, Bluetooth address.
● Reset: Tap to reset all data (factory mode).
● Alarm: Set several alarm clocks through the App in the phone.
● Sedentary Reminder: You can set time to remind yourself stand up.
● Find your phone: Tap it and phone makes a ringtone alert.
● Wrist bright screen: Set it in the App, it takes more power consumption when it is on.
● Units Setup: Metric or Imperial system.
● Data transmission: All the data will be saved in the device. No matter pedometer, heart rate, sleep quality, and multi-sport mode, all the data can be transmitted to the APP in the phone.
Warranty
we do not offer free warranty, as follows:
- Disassemble or refit the product.
- Caused by immodesty drop.
- All artificial damage or misuse (such as: make water into the host, the external force shatter, scratch damage of peripheral components, etc.), all these are beyond the scope of the warranty.
- When ask for free warranty, you must provide a warranty card with the seal of purchase place and purchase date.
- If you met problems during use, please contact the shop customer service which you bought from.
IP68 – Only dustproof and only accidental contact with fresh water – hand washing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>