anko 43056156 Bluetooth Karaoke Machine 43056156 Bluetooth Karaoke Machine Instruction Manual
- June 6, 2024
- Anko
Table of Contents
Bluetooth Karaoke Speaker
Keycode:43056156
operation instruction
Avoids to use the battery in the following conditions:
– High or low extreme temperature during use, storage, or transportation.
– Replacement of a battery with an incorrect type that can defeat a safeguard.
– Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
– Leaving a battery in an extremely high temperature surrounding environment
can result in an explosion or the leakage of flammable liquid or gas.
– Extremely high temperature and/or extremely low air pressure can result in
an explosion or the leakage of flammable liquid or gas.
Product feature ：
- 6 LED lighting modes, Romantic colorful light
- Bluetooth version 5.0, compatible with all audio devices with
- Bluetooth function, as MP3/4, mobile, computer, iPad…
- Built-in rechargeable lithium battery.
Button and interface
Location of Controls
- Adjustable Mic Stand
- Mic Stand Holder
- Handle
- LED Indicator
- [LED] Button
- [Power] Switch
- USB Charging Port
- 3.5 mm Auxiliary (AUX) Input
- Mic 1 Input
- Mic 2 Input
- Mic Volume Knob
- Mic Echo Knob
- Main Volume Knob
Charging the Speaker
Plug the micro-USS connector (smaller) of the included charging cable into the
micro-USS port on the top of the speaker. Plug the USB connector (larger) into
a USB power source, or into a 5V USB charging adapter (not included) and plug
into a wall outlet The LED indicator will tum RED while charging and turn OFF
when fully charged On low
power, a tone will be periodically heard, indicating that the speaker needs to
be recharged
Powering ON/OFF
Make sure that the speaker has been charged
• Flip the [Power) Switch to the ON position to power ON A tone will be heard,
and the speaker will enter Bluetooth pairing mode. It will automatically re-
pair to any nearby,
previously-paired device with Bluetooth enabled
• Flip the [Power] switch to the OFF position to power OFF
Playing Music
To play music on the speaker, you must be paired to a Bluetooth-enabled device
or connected with an aux cable. See the Bluetooth Pairing and Using with Wired
Device sections of this manual
Adjusting Volume
• To adjust overall volume, turn the Main Volume Knob on the top of the
speaker, or use the controls on your connected device
• To adjust microphone volume, turn the Mic Volume Knob 
Connecting with Bluetooth
1. Power the speaker ON. A tone will be heard, and The LED indicator will
quickly flash BLUE BSSK1050BK from
2. Set your mobile device to search for Bluetooth devices. When it appears,
select the list of found devices
3. After a successful pairing, a tone will be heard and the LED indicator
will slowly flash BLUE.
In Bluetooth mode, playback and volume can be adjusted by the controls on the
top of the speaker, or by the controls on your paired device
** Insert one connector of a 3.5mm auxiliary cable (not included) into the
3.5 mm auxiliary input port on the top of the speaker.
Insert the other connector into the headphone jack or 3.5 mm AUX output port
on your media-playing device. The LED indicator will tum solid BLUE and all
Bluetooth pairings will be disabled when the AUX input is in use
Using the Speaker Lights
Press the [LED) button to cycle through the light modes 
Setting Up the Stand
Insert the base of the included mic stand into the stand holder on the top of
the speaker, as shown in the diagram at right
Pull the body of the stand-up or down to adjust to the desired height
Using the Microphone
Plug the connector of the included microphone into the Mic 1
Input port on the top of the speaker. Slide the microphone into the microphone
holder at the top of the mic stand You can plug a second microphone (not
included) into the Mic 2 Input port on the top of the speaker
Microphone Controls**
- Slide the microphone’s power switch to the ON or OFF position to power the microphone ON or OFF
- Adjust microphone echo using the Mic Echo Knob
- Adjust microphone volume using the Mic Volume Knob
NOTE: In order to avoid loud feedback, keep the microphone pointed in the opposite direction of the speaker When not using, turn the mic volume down or turn the microphone off.
Packing accessories:
- Bluetooth Speaker
- USB charging cable
- Adjustable Mic Stand
- Microphone
- Instruction manual
Warning
DANGER; To reduce the risk of fire, do not immerse this product into water or
under the rain.
WARNING: Please refer to the electrical compliance label before charging or
operating the unit
WARNING: The product shall not be exposed to excessive heat such as direct
sunshine, fire, or under the wind hield.
Do not place or store this product where it can fall or be pulled into a water
source like a sink, tub, or pool while charging
If the product falls into water, unplug it immediately.
Do not expose battery to extreme temperatures
Do not tamper or puncture the battery
Do not use if the battery or any cords are damaged
Unplug your charger when not in use
Never try to repair this product yourself.
When the unit is not in use, make sure it is correctly turned off and stored
in a cool, dry place.
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair, or exchange
(where possible) for this product if it becomes defective within the warranty
period. Kmart will bear the reasonable expense of claiming the warranty. This
warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse or neglect. Please retain your receipt as proof of
purchase and contact our Customer Service Centre on 1800 124 125 (Australia)
or 0800 945 995 (New Zealand) or alternatively, via Customer Help at
Kmart.com.au for any difficulties with your product. Warranty claims and
claims for expenses incurred in returning this product can be addressed to our
Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation or any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>