UCTRONICS U6149 Metal Case with Re-locate Board and Ice Towel Cooler for Raspberry Pi 4 User Manual
- June 6, 2024
- UCTRONICS
Table of Contents
- UCTRONICS U6149 Metal Case with Re-locate Board and Ice Towel Cooler for
- NOTE
- ACCESSORIES
- INSTALLATION
- Step 1 Install HDMI adapter.
- Step 2 Align the holes on the lower cover.
- Step 3 Fix the HDMI adapter through 2 round head screws.
- Step 4 Fix the RPi through 3 M2.5*6
- Step 5 Stick the elastomeric heat-conducting pad.
- Step 6 Fix the fan on metal mounting plate.
- Step 7 Align the holes on the plate with the holes on RPi.
- Step 8 Fix the fan through 2 M2.5*17
- Step 9Install GPIO adapter.
- Step 10 Fix the GPIO adapter through 3 round head screws.
- Step 11 Install the power switch.
- Step 12 Install the upper cover.
- Step 13 Mount flat-nosed screws and stick rubber feet.
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UCTRONICS U6149 Metal Case with Re-locate Board and Ice Towel Cooler for
Raspberry Pi 4 User Manual
NOTE
- Do NOT allow the connecting wire to touch the fan when installing.
- If you have any iussues, feel free to email us at.
- 3.0.96 inch OLED display code library.
ACCESSORIES
INSTALLATION
Step 1 Install HDMI adapter.
Step 2 Align the holes on the lower cover.
Step 3 Fix the HDMI adapter through 2 round head screws.
Step 4 Fix the RPi through 3 M2.5*6
Step 5 Stick the elastomeric heat-conducting pad.
Step 6 Fix the fan on metal mounting plate.
Step 7 Align the holes on the plate with the holes on RPi.
Step 8 Fix the fan through 2 M2.5*17
Step 9Install GPIO adapter.
Step 10 Fix the GPIO adapter through 3 round head screws.
Step 11 Install the power switch.
Step 12 Install the upper cover.
Step 13 Mount flat-nosed screws and stick rubber feet.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......