beko Dryer User Guide

Dryer
User Manual

DS 7439 CSSX
2960312933_CZ/260121.1424

Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product
to someone else, give it a manual as well. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein. Use this user manual for the model indicated on the cover page.

| • Read the instructions.
---|---

Explanation of symbols
Throughout this user manual the following symbols are used:

DANGER!

• Warning against electric shock.
DANGER!

• Warning against fire hazards.
WARNING!

• Warning for hazardous situations with regard to life and property.
WARNING!

• Warning against hot surfaces.
WARNING!

• Warning against the scalding hazard.
NOTE

• Important information or useful hints about usage.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.

Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

Important instructions for safety and environment

NOTE

• This section contains safety instructions that will help protect you from the risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

1.1 General safety

WARNING!

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.  Cleaning and user maintenance shall not be made by children without supervision.
  Children of less than 3 years should be kept away unless continuously supervised.

• Adjustable feet should not be removed. The gap between the dryer and the floor should not be reduced with materials such as carpet, wood, and tape. This will cause problems with the dryer.

WARNING!

• Always have the installation and repairing procedures carried out by the Authorized Service. Manufacturers shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
• Never wash the dryer by spraying or pouring water onto it! There is the risk of electric shock!

For the products with a steam function:

WARNING!

• Use only distilled water or water condensed in the water tank of the machine in steam programs. Do not use mains water or additives. When using condensed water in the water tank, it should be filtered and cleared of fibers.
• Do not open the door when steam programs are running. Hot water may be expelled.
• Before putting laundry in a steam program, stains on it should be removed.
• You may only put laundry that is not dirty or stained but permeated with unpleasant odor in the steam (odor removal) program.
• Do not use any dry cleaning sets or additional materials in a steam program or in any program.

1.1.1 Electrical safety

DANGER!

• Electrical safety instructions should be followed while the electrical connection is made during the installation.
• Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician. Our company shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local regulations.
• The voltage and allowed fuse protection are stated on the type label plate.
• The voltage specified on the type label must be equal to your mains voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenance, cleaning, and repair work.
• Do not touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

WARNING!

• The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

DANGER!

• Do not use extension cords, multi-plugs, or adaptors to connect the dryer to the power supply in order to decrease the risk of fire and electric shock.
• The power cable plug must be easily accessible after installation.
• Damaged mains cable should be changed notifying the Authorized Service.
• If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock!

1.1.2 Product safety

DANGER!

• Superheating of the clothes inside of the dryer can occur if you cancel the program or in the event of a power failure whilst the dryer is running, this concentration of heat can cause self-combustion and fire so always activate the ventilation program to cool down or quickly remove all laundry from the dryer in order to hang them up and dissipate the heat.

WARNING!

• Ensure that the air inlet of the dryer is open and it is well-ventilated.
• The product contains R290 refrigerant.
• R290 is an environment-friendly, but flammable refrigerant.
• Keep the product away from potential heat sources that may cause it to ignite.

DANGER!

Points to be taken into consideration for fire hazards:
Below specified laundry or items must not be dried in the dryer considering fire hazards.

• Unwashed laundry items

• Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin, paraffin removers, petrol, wax, or wax removers must be washed in hot water with plenty of detergents before being dried in the dryer.
  For this reason, especially the items containing the above-specified stains must be washed very well, to do this use adequate detergent and choose a high washing temperature.
  Below specified laundry or items must not be dried in the dryer due to the fire hazard:

• Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement, and rubber foam pads.
  Clothing cleaned with industrial chemicals.
  Items such as lighter, match, coins, metal parts, needles,s, etc. may damage the drum set or may lead to functional problems. Therefore check all the laundry that you will load into your dryer.

WARNING!

Never stop your dryer before the program completes. If you must do this, remove all laundry quickly and lay them out to dissipate the heat.

DANGER!

• Clothes that are washed inadequately may ignite on their own and even may ignite after drying ends.
• You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the
  room due to the backfire effect.

WARNING!

• Underwear that contains metal reinforcements should not be dried in the dryer. The dryer may be damaged if metal reinforcements come loose and break off during drying.

NOTE

• Use softeners and similar products in accordance with the instructions of their manufacturers.
  Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed.

WARNING!

• Never attempt to repair the dryer by yourself. Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual. Otherwise, you will be putting your life and others’ lives in
  danger.

• There must not be a lockable, sliding, or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.

• Install your dryer at places suitable for home use. (Bathroom, closed balcony, garage, etc.)

• Make sure that pets do not enter the dryer. Check the inside of the dryer before operating it.

• Do not lean on the loading door of your dryer when it is open, otherwise, it may fall over.

• The lint must not be allowed to accumulate around the tumble dryer

• The tumble dryer is not to be used if industrial chemicals have been used for cleaning.

• Fabric softeners, or similar products. should be used as specified by the fabric softener instructions.

• Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels.

1.2 Mounting over a washing machine

• A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent.
• Total weight of the washing machine and the dryer -with a full load- when they are placed on top of each other reaches approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!

WARNING!

• The washing machine cannot be placed on the dryer. Pay attention to the above warnings during the installation of your washing machine.

Installation Table for Washing Machine and Dryer

Dryer Depth

| Washing Machine Depth
62 cm| 60 cm| 54 cm| < 50 cm
54 cm| Can be installed| Cannot be installed
60 cm| Can be installed| Cannot be installed

1.3 Intended use

• The dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
• Use the dryer only for drying laundry that is marked accordingly.
• The manufacturer waives any responsibility arising from incorrect usage or transportation.
• The service life of the dryer that you purchased is 10 years. During this period, original spare parts will be available to operate the dryer properly.

1.4 Child safety

• Packaging materials are dangerous for children. Keep packaging materials away from children.
• Electrical products are dangerous for children. Keep children away from the product when it is operating. Do not let them tamper with the dryer. Use the childproof lock in order to prevent the children to tamper with the dryer.

NOTE

A child-proof lock is on the control panel. (See Child lock

• Keep the loading door closed even when the dryer is not in use.

1.5 Compliance with the WEEE regulation and disposing of the waste

product

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high-quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

DANGER!

• R290 is a flammable refrigerant. Thus, ensure that the system and the pipes are not harmed during operation and handling.
• Keep the product away from potential heat sources that may cause it to ignite in case of damage.
• Do not dispose of the product by putting it on the fire.

1.6 Compliance with RoHS Directive:

The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.7 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

1.8 Technical Specifications

Rated power input
Model code

• Min. height: Height with adjustable feet are closed.
  Max. height: Height with adjustable feet are opened maximum.
  ** Dry laundry weight before washing.
  *** Type label is located behind the loading door.

NOTE

• Technical specifications of the dryer are subject to specification without notice to improve the quality of the product.
• Figures in this manual are schematic and may not match the product exactly.
• Values stated on markers on the dryer or in the other published documentation accompanying the dryer are obtained in the laboratory in accordance with the relevant standards. Depending on the operational and environmental conditions of the dryer, these values may vary.

Your Dryer

2.1 Overview

1.  Top panel
2. Control panel
3. Loading door
4.  Kick plate opening button
5. Ventilation grids
6. Adjustable legs
7. In models where the tank is placed below, the water tank is inside the toe board
8. Type label
9. Lint filter
10.  Water tank drawer (in models where the tank is placed above)
11. Power cord

2.2 Package Contents

| 1. Water drain hose | | 6. Water Filling Container
---|---|---|---
| 2. Filter drawer spare sponge*| ***| 7. Pure Water
| 3. User Manual| | 8. Fragrance Capsules Group
| 4. Drying basket| | 9. Brush
| 5. Drying basket user manual| | *** 10. Filter cloth

*Optional – may not be included, depending on the model.

 Installation

Before calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain are appropriate referring to the user’s manual.
If they are not suitable, contact a qualified electrician and technician to make necessary arrangements.

NOTE

• Preparation of the dryer’s location, as well as the electrical and wastewater installations, is under the customer’s responsibility.

WARNING!

• Prior to installation, visually check if the dryer has any defects on it. If the drier is damaged, do not have it installed. Damaged products cause risks for your safety.
• Let your dryer wait for 12 hours before starting to use it.

3.1 Appropriate installation location

Install the dryer on a stable and level surface.
The dryer is heavy. Do not move it by yourself.

• Operate your dryer in a well-ventilated, dust-free environment.
• The gap between the dryer and the surface should not be reduced by the materials such as carpet, wood, and tape.
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding, or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.
• Once the dryer is installed, it should stay at the same place where its connections have been made. When installing the dryer, make sure that it’s rear wall does not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from the edges of other furniture.
• Your dryer can be operated at temperatures between +5°C and +35°C. If the operating conditions fall outside of this range, the operation of the dryer will be adversely affected and it can get damaged.
• The rear surface of the tumble dryer shall be placed against a wall.

DANGER!

Do not place the dryer on the power cable.

• Ignore the following warning if your product’s system does not contain R290.

DANGER!

• The dryer contains R290 refrigerant.*
• R290 is an environment-friendly, but flammable refrigerant.*
• Ensure that the air inlet of the dryer is open and it is well-ventilated.*
• Keep potential flame sources away from the dryer.*

3.2 Removing the transportation safety assembly

WARNING!

• Remove the transportation safety assembly before using the dryer for the first time.
• Operate your dryer in a well-ventilated, dust-free environment.
• The gap between the dryer and the surface should not be reduced by the materials such as carpet, wood, and tape.
• If the door swing side of your appliance can be modified, see the reversible door mounting instructions.

3.3 Connecting to the drain

You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank.
Connecting the water drain hose

1-2 Pull the hose at the behind of the dryer by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose.
3 Connect one end of the drain hose supplied with the dryer to the connection point from where you removed the hose of the product in the previous step.
4 Connect the other end of the drain hose directly to the wastewater drain or to the washbasin.

NOTE

• The water drain hose should be attached to a height of a maximum of 80 cm.
• Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.
• If there is an accessories pack supplied with your product, please see the detailed description.

3.4 Adjusting the feet

• Turn the feet to left or right until the dryer stands level and firmly.

3.5 Transportation of the dryer

Drain all water that has remained in the dryer. If a direct water drain connection is made, then remove the hose connections.

WARNING!

• We recommend carrying the dryer in an upright position. If it is not possible to carry the machine in the upright position, we recommend carrying it by tilting towards the right side when looking from the front.

3.6 Warnings about sounds

NOTE

• It is normal to hear a metallic noise from the compressor sometimes during operation.
• Water collected during operation is pumped to the water tank. It is normal to hear pumping noise during this process.

3.7 Changing the illumination lamp

In case an illumination lamp is used in your laundry dryer. To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service. The lamp(s) used in his appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place laundry in the tumble dryer in a comfortable way. The lamps used in this appliance have to withstand extreme physical conditions such as vibrations and temperatures above 50 °C

Preparation

4.1 Laundry suitable for drying in the dryer

Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer.

4.2 Laundry not suitable for drying in the dryer

Items with this symbol should not be dried in the dryer.

NOTE

• Delicate embroidered fabrics, woolen, silk garments, delicate and valuable fabrics, airtight items, and tulle curtains are not suitable for machine drying.

4.3 Preparing laundry for drying

• Laundry may be tangled with each other after washing. Separate the laundry items before placing them into the dryer.
• Dry garments have metal accessories such as zippers, inside out.
• Fasten the zippers, hooks buckles, and button sheets.

4.4 Things to be done for energy saving

• Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and the energy consumption is reduced.
• Sort out the laundry depending on their type and thickness. Dry the same type of laundry together. For example, thin kitchen towels and tablecloths dry quicker than thick bathroom towels.
• Follow the instructions in the user manual for program selection.
• Do not open the loading door of the machine during drying unless necessary. If you must open the loading door, do not keep it open for a long time.
• Do not add wet laundry while the dryer is in operation
• For models with a condenser unit: clean the condenser once a month or after every 30 operations regularly.
• Clean the filter periodically. Read the maintenance and cleaning of filters for detailed information.
• For models with flue unit: comply with the flue connection instructions and clean the flue.
• During the drying process, air the room well where your tumble dryer is operating.

4.5 Correct load capacity

Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table.

Following weights are given as examples.

Laundry| Approximate weights (g)| Laundry| Approximate weights (g)
---|---|---|---
Cotton quilt covers (double)| 1500| Blouses| 150
Cotton quilt covers (single)| 1000| Cotton shirts| 300
Bedsheets (double)| 500| Shirts| 250
Bedsheets (single)| 350| Cotton dresses| 500
Large tablecloths| 700| Dresses| 350
Small tablecloths| 250| Jeans| 700
Tea towels| 100| Handkerchiefs (10 pieces)| 100
Bath towels| 700| T-Shirts| 125
Hand towels| 350| |

*Dry laundry weight before washing.

Running the product

5.1 Control Panel

1. On/Off/Program Selection button.
2. Start / Stand-by button.
3. Drum light button.
4. End time selection button.
5. Time program selection button
6. Low-temperature selection button.
7. Audible warning and child lock selection button.
8. Wrinkle prevention selection button.
9. Dryness level selection button.

5.2 Symbols

5.3. Preparation of drying machine

• Plug the drying machine.
• Open the loading door.
• Place the laundry in the drying machine without jamming them.
• Push and close the loading door.

WARNING!

• Ensure that no laundry is jammed into the loading door.
• Select the desired program by using the On/Off/Program Selection button, the machine will turn on.

NOTE

• Selecting the program with the On/Off/ Program Selection button does not mean that the program started. Press Start / Stand-by button to start the program.

5.4 Program selection and consumption chart

Programs| Program Description| Capacity (kg)| Spin speed in the washing machine (rpm)| Drying Time (minutes)
---|---|---|---|---
Cotton| You can dry your heat-resistant cotton textiles with this program. A drying setting suitable for the thickness of the products to be dried and the desired level of dryness should be selected.| 7| 1000| 184
Cotton Eco| It dries single-layer, casual cotton textiles in the most economical way.| 7| 1000| 174
Cottons Iron dry| You may dry your cotton laundry to be ironed in this program to have them slightly damp for ease of ironing. (Shirt, T-shirt, tablecloth, etc.)| 7| 1000| 139
Synthetics| You can dry all your synthetic textiles with this program. A drying setting suitable for the level of dryness you desire should be selected.| 4| 800| 65
Mix| Use this program to dry non-pigmenting synthetic and cotton laundry items together. Sports and fitness clothes may be dried with this program.| 4| 1000| 115
Towel| Drying towels such as kitchen towels, bath towels,s and hand towels.| 5| 1000| 175
gentle care| You may dry your delicate laundry or laundry with a hand wash symbol (silk blouses, thin underwear, etc.) at low temperature in this program.| 2| 1200| 55
Daily| You can dry both cotton and synthetic laundry with this program. Sports and fitness clothes may be dried with this program.| 4| 1000| 110
Drying Rack/ TimeDry| You may select from time programs between 10 and 160 minutes to achieve the desired drying level at a low temperature. In this program, the tumble drier’s operation lasts for the set time independently from the dryness of laundry. This product is available to be used with a drying basket as an option. For products that are sold without a basket, you can obtain a basket from an authorized service and use the drying programs specified above. For details of use, see the drying basket user guide.| –| –| –
Jeans| You may dry denim pants, skirts, shirts, or jackets in this program.| 4| 1200| 125
Outdoor/Sports (Goretex)| Use it to dry your clothes made of synthetics, cotton or mixed fabrics, or waterproof products such as functional jackets, raincoats, etc. Turn them inside out prior to drying.| 2| 1000| 135
---|---|---|---|---
Duvet/Downwear| You can dry your feather or fiber-filled textile that bears can be dried in the drier label as a single piece of laundry. You can dry a double duvet, pillow, or coat as a single piece of laundry. Dry your clothes such as coats and jackets turned inside out.| –| 800| 165
Shirts| It dries the shirts in a more sensitive manner and causes less creasing and easier ironing.| 1,5| 1200| 50
Express Super Short| Use this program to have 2 shirts ready for ironing.| 0,5| 1200| 30

Hygienic Drying

| It is the program that you can dry your washed products you want to provide with extra hygiene (baby clothes, underwear, towels, etc.). It provides high hygiene for your textiles via heat effect.| 5| 800| 200
Hygienic Refresh| You can use this program for your dry clothes and laundry that you want to provide with hygiene without washing them. It provides high hygiene for your dry textiles via heat effect.| 1,5| –| 120
Energy consumption values
Programs| Capacity (kg)| Spin speed in the washing machine (rpm)| Approximate amount of remaining humidity| * Energy consumption value kWh
Cotton Eco | 7| 1000| 60%| 1,71
Cottons Iron dry| 7| 1000| 60%| 1,35
Synthetics cupboard dry| 4| 800| 40%| 0,65
**| “Cotton Eco program” used at full and partial load is the standard drying program to which the information in the label and the fiche relates, that this program is suitable for drying normal wet cotton laundry and that it is the most efficient program in terms of energy consumption for Cotton.

*: Energy Label standard program (EN 61121:2012) The values in the table are determined according to the EN 61121:2012 standard. Consumption values may vary from the value in the chart depending on laundry type, wringing speed, ambient conditions, and voltage levels.

Allergy UK is the trademark of the British Allergy Foundation. The Seal of Approval has been created to guide people requesting advice that the product significantly reduces the amount of the allergens in an environment where allergic people are present or the product restricts/reduces/ eliminates the allergens. The purpose is to provide evidence that the products have been scientifically tested or analyzed to yield measurable results.

5.5 Auxiliary functions

Dryness level
The dryness level button is used for adjusting to desired dryness. Program time may change depending on the selection.

NOTE

• You can activate this function only prior to the start of the program.

Wrinkle prevention
You can turn on and off the wrinkle prevention function by pressing the wrinkle prevention selection button. If you will not take the laundry out immediately after the program is completed, you may use the Wrinkle prevention function to prevent wrinkling of your laundry.

Audible warning
The drying machine makes an audible warning when the program is completed. Press the “Audible Warning” button if you do not want an audible warning. When you press the audible warning button, the light goes off and it does not sound when the program is completed.

NOTE

• You can select this function before the program starts or after the program starts.

Low temperature
You can activate this function only prior to the start of a program. You can activate this function if you want to dry your laundry at a lower temperature. The program duration will be long after it becomes activated.

End time
You can delay the end time of the program up to 24 hours with the end time function.

1. Open the loading door and place the laundry.
2. Select the drying program.
3. Press the End Time selection button and set the delay time you wish. End Time LED turns on. (When pressed and hold the button, End-Time proceeds non-stop).
4. Press the Start / Stand-by button. End Time countdown begins. The “:” sign in the middle of displayed delay time flashes.

NOTE

• You can add or remove laundry within the end time. Displayed time is the sum of normal drying time and end time. End Time LED turns off at the end of the countdown, the drying starts and the drying LED turns on.

Changing the end time
If you want to change the duration during the countdown:
Pause the program Turn the On/Off/Program Selection button and cancel the program. Select the desired program and repeat the End Time selection.
Canceling the end time function If you want to cancel the end time countdown and start the program immediately:
Pause the program Turn the On/Off/Program Selection button and cancel the program. Select the desired program and press the “Start/Pause” button.

Drum Light
You can turn on and off the drum light by pressing this button. The light turns on when the button is pressed and turns off after a certain time.

5.6 Warning indicators

NOTE

• Warning indicators may vary depending on the model of your drying machine.

Filter cleaning
When the program is completed, the warning indicator for filter cleaning turns on.

Water tank
If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into standby. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. The warning indicator turns off and programs resume.

Cleaning of filter drawer/heat exchanger
The warning symbol flashes periodically to remind that the filter drawer must be cleaned.

5.7 Starting the program

Press the Start/Stand-by button to start the program.
Start/Stand-by and Drying indicators turn on to show that the program started.

5.8 Child Lock

The drying machine has a child lock which prevents the program flow from being interrupted when the buttons are pressed during a program. When the Child Lock is activated, all buttons on the panel except the On/Off/Program Selection button are deactivated.
Press the Audible Warning button for 3 seconds in order to activate the child lock. The child lock has to be deactivated to be able to start a new program after the current program is finished or to be able to interfere with the program. To deactivate the child lock, keep the same buttons pressed for 3 seconds.

NOTE

• When the child lock is activated, the child lock warning indicator on the screen turns on.

When the child lock is active:
The drying machine runs, or in the standby state, the indicator symbols will not change upon changing the position of the program selection button.

NOTE

• When the drying machine is operating and the child lock is activated, a double beep sound is heard when the program selector switch is turned. If the child lock is canceled without turning the program selector button back to its original position, the program is terminated since the program selector button is turned.

5.9 Changing the program after it is started

You can change the program you selected to dry your laundry with a different program after the drying machine starts running.

• For example, Pause the program and turn the On/Off/Program Selection button to select the Extra Dry program in order to select the Extra Dry program instead of Ironing  Dryness.

• Press the Start/Stand-by button to start the program.
  Adding and removing clothes during standby If you want to add or remove clothes to/from the drying machine after the drying program starts:

• Press the Start/Stand-by button to put the drying machine in a Stand-by state. The drying operation stops.

• Open the loading door while in Standby state, and close the door after you remove or add laundry.

• Press the Start/Stand-by button to start the program.

NOTE

• Adding laundry after the drying operation starts may cause the dried laundry inside the drying machine to mix with wet laundry and leave the laundry damp at the end of the operation.
• Adding or removing laundry during drying may be repeated as many times as you wish. But this operation continuously interrupts the drying operation, and thus increases program duration and energy consumption. So, it is recommended to add laundry before the program starts.
• If a new program is selected by turning the program selection button while the drying machine is on stand-by, the running program terminates.

WARNING!

• Do not touch the inner surface of the drum while adding or removing clothes during a continuing program. The drum surface is hot.

5.10 Cancelling the program

IIf you want to cancel the program and terminate the drying operation for any reason after the drying machine starts running, Pause the program and turn the On/Off/Program Selection button; the program terminates.

WARNING!

• The inside of the drying machine shall be extremely hot when you cancel the program during machine operation, so run the refreshing program to allow it to cool down.

5.11 End of program

When the program ends, the LEDs of End/Wrinkle Prevention and Fibre Filter Cleaning Warning on the program follow-up indicator turn on. The loading door can be opened and the drying machine is ready for another operation. Turn the On/Off/Program Selection button to the On/Off position in order to turn off the drying machine.

NOTE

• If the Wrinkle Prevention mode is active and the laundry is not removed after the program is completed, the wrinkle prevention function activates for 2 hours to prevent the laundry inside the machine to get wrinkled. The program tumbles the laundry with 10-minute intervals to prevent them from wrinkling.

5.12 Odour feature

If your drying machine has an odor feature, read the ProScent manual to use this feature.

Maintenance and cleaning

6.1 Loading Door Inner Surface

The hair and fibers that are separated from the laundry during the drying process are collected by the Fibre Filter.

NOTE

• Fibers are formed during wearing and washing clothes.
• You can clean the filter slot with a vacuum cleaner.

WARNING!

• After each drying cycle, clean the fiber filter and the inner surface of the loading door.

To clean the fiber filter:

• Open the loading door.
• Hold the first part (inner filter) of the two-part fiber filter and remove it by pulling it upwards.
• Collect the hair, fibers, and cotton balls by hand or with a soft cloth.
• Remove the second part (outer filter) by pulling it upwards.

NOTE

• Ensure that hair, fiber, and cotton balls do not fall into the slot where the filters are installed.

• Open both filters (top and bottom filters) and remove the lint with your hand, or use a cleaning brush at the air routing cover. And if necessary, use a vacuum cleaner to clean filters.

• Clean both filters underwater running in the reverse direction of fiber accumulation or with a soft brush. Dry the filter before placing it back.

• Insert the fiber filters on one another and place them back in their place.

• Clean the front door interior surface and its gaskets with a soft damp cloth or with the brush on-air routing cover.

6.2 Cleaning the sensor

There are dampness sensors in the dryer that detect whether the laundry is dry or not. To clean the sensors:

• Open the loading door of the dryer.
• Allow the machine to cool down if it is still hot due to the drying process.
• Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar, and dry them.

NOTE

• Clean metal surfaces of the sensors 4 times a year.
• Do not use metal tools when cleaning metal surfaces of the sensors.

WARNING!

• Never use solvents, cleaning agents, or similar substances for cleaning due to the risk of fire and explosion!

6.3 Draining the water tank

The dampness of the laundry is removed and condensed during the drying process and the water that arises accumulates in the water tank. Drain the water tank after each drying cycle.

WARNING!

• The condensed water is not drinkable!
• Never remove the water tank when the program is running!

If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water  Tank warning symbol will flash. If this is the case, drain the water tank and press the Start / Pause button to resume the drying cycle. To drain the water tank:

1. Remove the water tank in the drawer or container carefully.
2. Drain the water in the tank.

• If there is lint accumulation in the funnel of the water tank, clean it under running water.
• Place the water tank into its seat.

NOTE

• If direct water draining is used as an option, there is no need to empty the water tank.

6.4 Cleaning the Condenser

A small amount of lint may pass through the lint filter and be collected on the metal surface of the condenser.
The condenser metal surface needs to be cleaned regularly.
If the evaporator icon is flashing on the display, please inspect the metal surface of the condenser. If it is dirty, clean it. This part should be checked at least once every 6  months.

• Open the toe board by pressing on it.

• To open the air routing door, move the release latch.

• Pull the brush to the left side and remove it. You can use the cleaning brush for removing collected fluff on the metal surface of the condenser.

NOTE

• The brush is inside the printing materials bag.
  You can place it in its housing on the air routing cover after the first usage.

• Collected fluff on the condenser surface should be removed by a damp cloth or rubbing the brush placed on the air routing cover up and down on the condenser.

• Please do not clean condenser fins in the right-left direction to avoid damage.

• You can also use a vacuum cleaner with a brush for cleaning. Condenser cleaning is not recommended with a brushless vacuum cleaner.

• Insert the brush into its slot pushing to the right, after cleaning the condenser, front cover, and lint filter.

• After the cleaning process is completed, place the air router door to its place, move the latches to close it, and close the toe board.

WARNING!

• You can clean by hand, provided you wear protective gloves. Do not try to clean with bare hands. Condenser fins may damage your hands. Cleaning by the left to right movements may damage the condenser fins. This may lead to drying issues.

WARNING!

• It is normal to see some water on the plastic surface in front of the condenser when you open the air routing cover.

Troubleshooting

The drying operation takes too long.

Fiber filter (interior and exterior filter) pores may be clogged. >>> Wash the fiber filters with warm water and dry.
Evaporator’s front side may be clogged. >>> Clean the front side of the evaporator.
The ventilation grills in front of the machine may be closed. >>> Remove any object in front of the ventilation grills that blocks air.
Ventilation may be inadequate because they are the machine is installed is too small. >>> Open the door or windows to prevent the room temperature from rising very high.
A lime layer may have accumulated on the humidity sensor. >>> Clean the humidity sensor.
An excessive amount of laundry might be loaded. >>> Do not load the drying machine excessively.
The laundry might not have been wrung adequately. >>> Perform a higher speed wringing on the washing machine.
Clothes come out damp after drying.
A program not suitable for the laundry type may have been used.>>> Check the maintenance labels on the clothes and select a program suitable for the clothes’ type or use time programs as extra.
Fiber filter (interior and exterior filter) pores may be clogged. >>> Wash the filters with warm water and dry. Evaporator’s front side may be clogged. >>> Clean the front side of the evaporator.
An excessive amount of laundry might be loaded. >>> Do not load the drying machine excessively.
The laundry might not have been wrung adequately. >>> Perform a higher speed wringing on the washing machine.
The drying machine does not turn on or the program cannot be started. The drying machine does not run after it is configured.
The power plug might be unplugged. >>> Make sure the power cord is plugged in.
The loading door might be open. >>> Ensure that the loading door is properly closed.
A program might not be set or Start / Pause /Cancel button might not be pressed. >>> Check that the program is set and it is not in Pause position..
Child lock may be activated. >>> Turn off the child lock.
The program terminated prematurely for no reason.
The loading door might be closed completely. >>> Ensure that the loading door is properly closed.
There might be a power outage. >>> Press the Start / Pause / Cancel button to start the program.
The water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened, or spoiled.
A program not suitable for the laundry type might have been used. >>> Check the maintenance labels on the clothes and select a program suitable for the clothes.
Water drips from the loading door.
Fibers might have gathered on the inner sides of the loading door and the loading door gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket surfaces.
The loading door opens by itself.

The loading door might be closed completely. >>> Push the loading door until the closing sound is heard.
The water tank warning symbol is on/flashing.
The water tank may be full. >>> Empty the water tank. The water discharge hose might have collapsed. >>> If the product is connected directly to the water drain check the water discharge hose.
The lighting inside the drying machine does not turn on. (In models with lamp)
The drying machine might not have been turned on using the On/Off button. >>> Check that the drying machine is turned on.
The lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp.
The anti-crease icon is lit.
Anti-Crease mode that prevents the laundry in the drier to crease may be activated. >>> Turn the drier off and remove the laundry.
The fiber filter cleaning icon is lit.
The fiber filter (interior and exterior filter) may be unclean.

Wash the filters with warm water and dry..
A layer may be formed on the fiber filter pores that lead to clogging. >>> Wash the filters with warm water and dry.
Fiber filters may not be inserted. >>> Insert the interior and exterior filters to their places.
An audible warning is heard from the machine
Fiber filters may not be inserted. >>> Insert the interior and exterior filters to their places.
The evaporator warning icon is flashing.
Evaporator’s front side may be clogged with fibers. >>> Clean the front side of the evaporator.
Fiber filters may not be inserted. >>> Insert the interior and exterior filters to their places.
The lighting inside the drying machine turns on. (In models with lamp)
If the drying machine is plugged into the power outlet, the On/Off button is pressed and the door is open; the light turns on. >>> Unplug the drying machine or bring the On/Off button to the Off position.

WARNING!

• If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Never try to repair your product yourself.

NOTE

• In an event that you encounter an issue on any part of your appliance, you can ask for a replacement by contacting the authorized service with the appliance model number.
• Operating the appliance with non-authentic parts may lead the appliance to malfunction.
• The manufacturer and distributor are not liable for malfunctions resulting from using non-authentic parts.

PRODUCT FICHE

Complying Commission Delegated Regulation (EU) No 392/2012
Supplier name or trademark|

BEKO

Model name|

DS7439CSSX
7188235720

Rated capacity (kg)|

7.0

Type of Tumble Dryer|

Air Vented

|

–

Condenser

|

•

Energy efficiency class (1)|

A++

Annual Energy Consumption (kWh) (2)|

210,6

Type of Control|

Automatic

|

•

Non-automatic

|

–

Energy consumption of the standard cotton program at full load (kWh)|

1,71

Energy consumption of the standard cotton program at partial load (kWh)|

0,98

Power consumption of the off-mode for the standard cotton program at full load, PO (W)|

0,50

Power consumption of the left-on mode for the standard cotton program at full load, PL (W)|

1,00

The duration of the left-on mode (min)|

30

Standard cotton program (3)|

•

Program time of the standard cotton program at full load, Try (min)|

174

Program time of the standard cotton program at partial load, Tdry1/2 (min)|

107

Weighted program time of the standard cotton program at full and partial load (T t)|

136

Condensation efficiency class (4)|

B

Average condensation efficiency of the standard cotton program at full load, Cry|

81%

Average condensation efficiency of the standard cotton program at partial load, Cdry1/2|

81%

Weighted condensation efficiency of the standard cotton program at full load and partial load, Ct|

81%

The sound power level for the standard cotton program at full load (5)|

65

Built-in|

–

: Yes -: No

(1) Scale from A+++ (most efficient) to D (least efficient)
(2) Energy consumption based on 160 drying cycles of the standard cotton program at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used.
(3) “Cotton cupboard dry program” used at full and partial load is the standard drying program to which the information in the label and the fiche relates, that this program is  suitable for drying normal wet cotton laundry and that it is the most efficient program in terms of energy consumption for cotton
(4) Scale from G (least efficient) to A (most efficient)
(5) Weighted average value — L WA expressed in dB(A) re 1 pm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>