ozone ZX-05B Sterilizing Machine User Manual
- June 6, 2024
- ozone
Table of Contents
ozone ZX-05B Sterilizing Machine
Feature & Technical Information
- Ozone generator is a compact machine with PCB controller in the body of the unit, also can generate ozone to sterilize the air by its oxidation and be deoxidized into oxygen without secondary pollution.
- This unit is made of ceramic place as a discharge part.
- Power Supply Unit is the core technique of the unit, included frequency conversion and boost converter. It adopts soft start to make the unit to operate stably with high load capacity and highly efficient
- The unit should operate together with a clean air intake.
- Discharge compartment is cooled by wind cooling system. The unit will produce electric discharge sound and ozone output stably without damaging components.
| Model | ZX-05B |
|---|---|
| Rated Power | 100 W |
| Effective Area | 50-80 m2 |
| Cyclic Timer Function | Auto ON-OFF |
| Plate Size | 225×185×165 mm |
| Input Power | AC 220V |
| Working Frequency | 50/60 Hz |
| Ozone Output | 5000 mg/H |
| Timer | 120 minutes |
| Product Dimensions | 270×240×200 mm |
Packing
- 1× Ozone generator
- 1× Power cord
- 1× User’s manual
- 1× Service card
Instructions
- Insert into socket with wire and voltage meter.
- Turn on the power. It is not recommended to use the machine for continuous work as long work time will burn the machine.
- Set the disinfection time you want; the longest working time is 120 minutes.
- Do not smell the ozone directly.
Maintenance & Notes
- If your environment is not in a good condition, you should clean the ozone discharge plate frequently. We suggest you to clean it once every 3-6 months.
- When used for air purification, it is advised that people should leave the sterilization area in case of respiratory system stimulation because of high density of ozone.
- This unit should operate in a dry and ventilated spaces. Please shield it from direct sunshine and rain, if it must work outside.
- Shut off the power if it is not used for a long time.
Troubleshooting
| No. | General Failure | Failure Analysis | Solution |
|---|---|---|---|
| 1 | Power indicator off | No power | Connect the power |
| Fuse damaged | Replace the fuse | ||
| Indicator damaged | Replace the indicator | ||
| 2 | Operation indicator off | No power | Connect the power |
| Fuse damaged | Replace the fuse | ||
| Indicator damaged | Replace the indicator | ||
| 3 | Small amount of ozone | Discharge aged plate | Replace the discharge ozone |
plate or control circuit board
Ozone plate dirty
Fan is not working
4| Small amount of ozone| Discharge aged plate| Replace the discharge plate
Ozone plate dirty| Open the device and clear the plate with alcohol and soft
cloth
Fan is not working| Replace the fan
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>