Govee H5179 Wifi Thermo Hygrometer User Manual
- June 6, 2024
- Govee
Table of Contents
User Manual
Model: H5179
Wi-Fi Thermo-hygrometer
At a Glance
1. Ventilation Hole
2. LED Indicator
3. Hanging Hole
4. Battery Cover
What You Get
| Wi-Fi Thermo-hygrometer | 1 |
|---|---|
| AAA Battery (In the device) | 3 |
| Lanyard | 1 |
| User Manual | 1 |
| Service Card | 1 |
Specifications
| Accuracy | Temperature: ±0.3°C/±0.54°F Humidity: ±3%RH |
|---|---|
| Working Temperature | -20°C to 60°C/14°F to 140°F |
| Working Humidity | 0%RH – 99%RH |
| Bluetooth-enabled Range | 30m/49ft (no obstructions) |
| Wi-Fi-enabled Range | 50m/98ft (no obstructions) |
Using the Device
Please take out the insulation sheet before using it.
LED Indicator Status Guides:
| Situation | LED Indicator Status |
|---|---|
| The device is powered on for the first time. | Flash blue once. |
| Connected to Wi-Fi. | Flash blue every 60s. |
| The battery power is less than 15%. | Flash red every 30s. |
Downloading the Govee Home App
1. Prepare a smartphone or tablet running iOS 9.3 (or above) or Android 4.3
(or above);
2. Download the Govee Home app from the App Store (iOS devices) or Google
Play (Android devices).
Connecting to the Wi-Fi Network
Notice : a. Make sure the Wi-Fi router supports 2.4GHz and 802.11 b/g/n
bands; b. Turn on Bluetooth on your mobile phone.
- Open the Gove Home, tap the “+” icon in the top right corner, and select “H5179”;
- Follow instructions on the app to complete the connection.
- The LED indicator flashes blue every 60s once the connection is completed.
- Please check the above steps and try again if the connection failed.
Using the Device with the Gove Home
°C/°F Switch Switch the temperature unit between °C and °F.
Data Export
Export historical temp and humidity records to CSV format after filling in the
mailbox.(Notice: The unit of exported temperature readings is the same with
that on the app.) Alert Notification
The app pushes notifications once temp or humidity goes out of the preset
range.
Calibration
Calibrate the temp and humidity readings.
Upload Interval
The interval for Cloud data uploading.
Wi-Fi Settings
Connect to Wi-Fi again or change a new Wi-Fi.
Data Clear
Clear local and Cloud storing data.
Troubleshooting
1. Cannot receive an alert notification. / Alert notification delayed.
a. Make sure the Wi-Fi signal is stable.
b. Keep the device as close to the router as possible.
c. Keep as few obstructions as possible between the device and the router.
2. Lost Wi-Fi connection frequently.
a. Make sure the distance between the device and the router is less than
50m/98ft.
b. Keep as few obstructions as possible between the device and the router.
c. Check whether the battery is running low.
Warning
1. The device should work in an environment with a temperature ranging from
-20℃ to 60℃ and humidity from 0%RH to 99%RH.
2. Do not disassemble the device violently.
3. Do not immerse the device in the water.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>