Air Guard AG-1500 Antibacterial Vaporizer User Manual

Air Guard AG-1500 Antibacterial Vaporizer

Safety Information

Thank you for choosing Air Guard. Please read the following safety information carefully before operating the machine. This information includes important safeguards about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed on the machine.

• Keep this device dry.
• Always connect to a grounded circuit to avoid risk of electrocution.
• Before connecting the machine to power, always check the voltage indicate on the machine matches to your local AC voltage. Do not use the machine if AC power voltage does not match.
• Disconnect the machine from AC power before servicing and when not in use.
• If the supply cord is damaged, contact your local dealer for replacement.
• This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled, disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts, immediately unplug the machine and contact your local dealer for advice.
• No user serviceable and modifiable parts inside. Never try to repair this product, an unauthorized technician may lead the machine to damage or malfunction.
• For adult use only. Children being supervised not to play with the machine. Never leave the machine running unattended.
• The machine is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
• Installed in a well ventilated area. Provide at least 50 cm space around the machine.
• Never add flammable liquid of any kind to the machine.
• Make sure there are no flammable materials close to the machine while operating.
• Only use Air Guard Antibacterial Solution. Other solution may lead to heater clog and malfunction.
• If the machine fails to work, unplug the machine and stop operation immediately. Contact your local dealer for advise .
• Before transporting the machine, make sure the fluid tank is completely drained.
• Air Guard Antibacterial Solution may present health risks if swallowed. Do not drink Air Guard solution. Store it securely. In case of eye contact or if solution is swallowed immediately look for medical advice.

Unpacking and Inspection

Immediately upon receiving the antibacterial vaporizer, carefully unpack the carton, check the content to ensure that all parts are present and have been received in good condition. If any parts appear damaged or mishandled from shipping, notify the shipper immediately and retain the packing material for inspection.

What is included
1 x AG-1500 Antibacterial Vaporizer 1 x Wireless Remote Control
1 x Power Cord
1 x User Manual

Product Dimensions

Product Overview

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm open space at each side of the machine and 2 meters for the output direction of the machine.
Step 2: Fill the fluid tank with Air Guard fluid.
Step 3: Connect the machine to suitably rated power supply. To determine the power requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly grounded to avoid risk of electrocution.
Step 4: Turn on the machine by connecting the power cord. Heat-up takes approximatley 6 minutes. Once the machine has reached operating temperature, the LCD screen will display “Ready To Fog”. Now the machine is ready for operation.

Control Panel Operation

Control Panel Operation
The machine can be operated with the onboard digital control interface.

Control Menu

Output Time
30 Sec     Set output time 30, 60, 90, 120,150,180 or 300 seconds

Output Volume
Normal  Set output volume to normal or high

Wireless
Off        Turn On/Off wireless control

Wireless Remote Control Operation

Wireless remote control system W-1 consists of a transmitter equipped with two buttons to activate, deactivate and an onboard receiver attached to the rear panel of AG-1500.

W-1 Wireless Transmitter

Press [A] button to emit fog and press [B] button to stop.
In an unobstructed open space the effective distance is 50 meters, usage depending on obstacle level the effective distance is 10-25 meters.

Wireless Receiver

Registering transmitter
Transmitter can be paired or deleted from the receiver. Each receiver can pair up to 10 transmitters. Follow below steps to pair or delete transmitter from receiver.

Step 1: Power off AG-1500 Antibacterial Vaporizer
Step 2: Press and hold [DOWN] button
Step 3: Turn power on and release [DOWN] button when LCD display blinks
Step 4: Follow the menu instruction to pair or delete transmitter

Notes:
One machine can be controlled by up to 10 transmitters while one transmiter can be paired with an unlimited number of machines.

Transmitter battery replacement
If the effective distance seems to decrease, it is possible the battery level is low and requires replacement. In order to replace the battery, undo the three screws on the back of transmitter to release the cover. Replace with the same type and specification of battery which is 27A 12V

Fluid

Use Air Guard Antibacterial Solution for AG-1500. The machine is tested and calibrated with these authorized fluids to achieve the best performance. Warranty will be void, if any other type of liquid is used. Improper use of liquid may lead to machine failure and danger.

Service and Maintenance

• Do not allow the machine and fluid to become contaminated.
• Regularly fill distilled water to fluid tank and run the machine to clean the system. After cleaning, refill Air Guard fluids into fluid tank and make sure machine can produce fog properly.
• It is recommended to run the machine on a monthly basis in order to achieve best performance and output condition.
• Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

Breaker Reset
Disconnect AC power before resetting the breaker. Only replace fuse with same type and rating.

Step 1: Disconnect AC power.
Step 2: Flip breaker to ON position.
Step 3: Turn on machine for testing.

Breaker

100-120V = 15A 250V
220-240V = 8A 250V

Technical Specifications

• Input voltage               US model : AC 100-120V, 50 / 60Hz 12A
  EU model : AC 220-240V, 50 / 60Hz 6A

• Rated power                1450W

• Warm-up time             6 minutes (approx.)

• Fluid consumption      40 ml/min

• Fluid tank capacity       2.4L (0.63gal)

• Compatible fluid          Air Guard Antibacterial Solution

• Ambient temp. range    0 °C – 40 °C (32 °F-104 °F)

• Output                          2 meters height

• Control                          Timer
  Wireless

• Connection                   IEC (Power)

• Dimension                    L344 W193 H381 mm
  (L13.54 W7.60 H15 inch)

• Weight                          10.7 kg (23.6 lbs)

M22 Moisture Co., Ltd.
Tel : +886 3 2227470 Fax : +886 3 2227469
www.airguard.com.tw e-mail : sales@airguard.com.tw
C08AG1501

References

• Air Guard – Air Guard – Easy Go, Easy Use! Portable design means you can use the disinfector anywhere – in your home, office, boat, car, anywhere! Eficiently eliminate the bad odor and bacteria, mold, fungi in short time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>