SUNCO Smart Bulb User Manual

: June 6, 2024
: SUNCO

Table of Contents

SUNCO Smart Bulb
Installation
- Connecting
GOOGLE HOME SETUP
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SUNCO Smart Bulb

sunco smart bulb

Installation

STEP 1: INSTALL SMART LIFE APP

Download and install the Smart Life APP via iOS App store or Google Play Store. Search for “Smart Life – Smart Living.”

STEP 2: REGISTER YOUR ACCOUNT

Register using your mobile phone number or email address to receive a verification code, and press next.
Enter the verification code and press next.
Create a password for your account and press next

STEP 3: ADDING BULBS

Plug in and ensure the light turns on.
Open the Smart Life APP. Click “Add a device” or the “+” in the top right corner.
Select “Lighting” and then “Lighting (Wi-Fi)” to reach list.
Select 2.4 GHz Wifi Network and enter your password.

For best functionality maintain a strong WiFi signal and keep smart device, bulb, and router within range.

STEP 4: RESET THE BULB

NOTE : you can only pair ONE bulb at a time.

If the light is already blinking rapidly, skip this step.

Rapid Blink

Screw the bulb into your lamp or light fixture.
Turn the power On-Off-On-Off-On quickly.
Bulb should begin blinking, indicating it is ready to pair.

Slow Blink

Bulb should begin blinking, indicating it is ready to pair.

• Change pairing mode from EZ Mode to AP Mode in top right corner.
• Check the “Confirm the Light is blinking slowly” prompt then click on “Go to Connect”
• Follow the app connection steps.

NOTE : If you see ‘no internet available,’ that is okay while pairing. Go to WiFi settings on your device and connect to bulb’s hotspot (may appear as SmartLife- or SL- followed by a series of numbers/letters).
• Bulb should begin blinking slowly, indicating it is ready to pair.

Connecting

While connecting, the bulb will change from flashing to steady as the app % increases. At 100% the bulb has configured successfully. You can rename the bulb and share it with family members registered to the Smart Life App using the mobile number they registered with, so they can control the bulb from their phone.
NOTE : You will need to enter their number exactly as they typed it for registration.

STEP 5: CONTROL YOUR LIGHTING

Click on the bulb you want to control to change the color, adjust brightness, choose a scene, or set a schedule. Alternatively, you can create a group of bulbs to change settings for more than one bulb at a time. See “Create Groups.” Select the bulb and click the settings in the top right to check the network status, add it to a group of bulbs to control together, or share it with other members of the household. detail 1 Color Temperature
You can change the light bulb from a soft white to a bright daylight white. Change your lighting in seconds from warm light to cool light.

Choose RGB Color (16+ million options)
Choose from any hue in the rainbow with a quick swirl on our RGB color wheel. Adjust the brightness and shade to suit your mood.

Set the Scene & Save it for Later
Choose from included scenes or create your own to adjust room look and feel. Save one for movie night, a party scene with colorful lights, or a candlelit room with warm, low lighting.

Create Schedules
Automate your light ON/OFF. Set schedules based on your preferences and needs. Choose individual actions or group bulbs. Make your lights work around your life.

Music Sync
Make your light bulb change color to the beat of music.

Create Groups

Click on the bulb you would like to add to a group. Select settings by clicking the three dots in the top right of your screen.
Select Create Group.
Select the smart bulbs you would like to be part of a group.
Click Save and select a name for the group.

You can then control these bulbs together including changing color, changing a scene or setting a schedule. For example, you can switch all your downstairs lights on as soon as it gets dark by creating a schedule. The option to create families is helpful for large setups but not a necessity. Simply add a family name and location, then select rooms where smart bulbs will be located. When finished press done.

Bulb Settings
Click on the three dots in the top right to control settings for each bulb. From here you can change the device name, check the Wi-Fi network status, share the bulb with other household members, create a group and more. Please connect to the bulb directly using the quick connection to access all the settings.

Voice Control Using the Smart Life APP
Use the App to control your bulbs using your voice. Click on the microphone icon and use the following commands to control your bulb using your voice: Please see below examples of commands you can use after pressing the microphone icon (replace bulb name with the name of your bulb):

Switch on/off: “Turn on bulb name”, “Turn off bulb name”
Change color: “Change bulb name to blue”
Change brightness: “Change bulb name brightness to 90%”
Profile: Select Profile to change your settings. You can edit your profile settings, share your bulbs with other devices and more.

GOOGLE HOME SETUP

Voice Control using Google Home

Tap “Home Control” in the hamburger menu on the Google
Home APP’s home page, then tap “+.”
Find “Smart Life” on the list. In the new window, select your Smart Life account’s region, type your Smart Life account and password, then tap “Link Now.” After you assign rooms for devices, your devices will be listed in the Home Control page.
Now you can control your smart devices through Google Home. Take bedroom light as an example. The supported voice commands are as below:
“Ok Google, turn on/off bedroom light.”
“Ok Google, set bedroom light to 50 percent.”
“Ok Google, brighten bedroom light.”
“Ok Google, dim bedroom light.”
”Ok Google, set bedroom light to red.”

AMAZON ALEXA SETUP
Choose “Skills” in the options bar, and then search “Smart Life “ in the input box. Select Smart life in the search results, and then click “Enable To Use.” Input the user name and password that you used previously to register.

Control Smart Bulb by Voice
After the above operation is successful, you can control the bulb via Echo.

Discover Devices
Say to Echo: “Echo(or Alexa), Discover my devices.” Echo will start to find the devices which have been added in the Smart life APP. It will take about 20 seconds, and then it will tell you the result. You can also click “Discover devices” in Alexa APP, and it will show the devices that it found successfully.

Control Devices by Voice
You can control the bulbs by instructions like these:

“Echo(or Alexa), turn on bedroom light”
“Echo(or Alexa), turn off bedroom light”
“Echo(or Alexa), set bedroom light to 50 percent”
“Echo(or Alexa), increase bedroom light to 50 percent”
“Echo(or Alexa), decrease bedroom light to 50 percent”

Disposal
Do not dispose of this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary. Recycling facilities should be available, you can deposit your old electrical products.

Support
For further support with setup and if you require any help to make the most of your smart bulb, please contact our customer services support team.
844-334-9938