ETEKCITY EK9000 Digital Kitchen Scale User Manual
- June 6, 2024
- ETEKCITY
Table of Contents
ETEKCITY EK9000 Digital Kitchen Scale User Manual
Thank you for purchasing the Digital Kitchen Scale by Etekcity.
If you have any questions or concerns, please reach out to our helpful Customer Support Team at support.eu@etekcity.com. We hope you enjoy your new kitchen scale!
Become an Etekcitizen
Exclusive deals, giveaways, and product registration. Better products for
better living. Find us at etekcity.com
Package Contents
1 x Digital Kitchen Scale
2 x 1.5V AAA Batteries (Pre-Installed)
1 x Quick Start Guide
Specifications
READ AND SAVE THESE INSTRUCTIONS
Important Safety Information
To avoid damage to this scale, please read and follow all instructions and safety guidelines in this manual.
Scale
- Do not exceed the 5000 g / 11 lb weight capacity, as this will damage the scale. An error indicator will appear on the LCD display if the limit is exceeded.
- Do not immerse the scale in water or any liquid. If liquid is spilt on the digital display or buttons, immediately wipe the scale dry with a soft cloth to avoid internal damage.
- Handle with care. This scale is not intended for commercial or heavy-duty use.
- Keep the scale in a cool, dry place. Avoid exposure to damp environments or extreme temperatures.
- Household use only.
Batteries
- Do not mix new and old batteries.
- If the low battery indicator “L0 ” appears on the display, replace the batteries.
- If the scale is not in use for an extended period of time, remove the batteries to conserve battery life and extend the lifetime of the scale.
Function Diagram
- A. Unit Selection Button
- B. LCD Display
- C. Power/Tare Button
- D. Anti-Skid Pads
- E. Battery Compartment
LCD Display
- A. Tare Mode
- B. Milk
- C. Water (Liquid)
- D. Solids
- E. Weight Value
- F. Measurement Unit
Before First Use
The batteries are pre-installed in the scale.
-
Open the battery compartment on the underside of the scale.
-
Remove the plastic strip from the battery compartment.
[Figure 1.1] -
Replace the battery compartment cover.
-
Turn the scale over again and place on a hard, dry, flat surface.
-
Press to turn on the scale.
Using Your Scale
Note:
- For accurate results, always place the scale on a hard, dry, flat surface, and keep the scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference.
- When you turn on the scale, choose units, or use the Tare function, wait for the display to read “000” before measuring.
General Operation
- Place the scale on a hard, dry, flat surface.
- Press to turn on the scale. Make sure the display reads ” 0000″. Press UNIT to select your desired measuring unit, which will show on the right of the display.
- Place your item on the scale.
- Wait for the reading on the display to stabilize.
Zero / Tare Function
When you measure items inside a container, you can use the Tare function to remove the container’s weight from the final measurement.
- Press to turn on the scale. Make sure the display reads “000 “. If the screen does not display “000 ” automatically, press to auto-adjust to zero.
- Place the container on the center of the scale.
- Wait for the reading on the display to stabilize. The display will show the container’s weight.
- Press to tare the weight of the container. The screen should now display “000 “.
- Place the liquid or items into the container. The scale will measure the contents without including the weight of the container. [Figure 2.1]
- When you’re done, reset the scale by removing all weight and pressing again.
Unit Conversion
To change the unit of measurement, press UNIT until the display shows the desired unit of measurement.
Automatic Power Off
To save battery power, the scale will automatically power off after 120 seconds of inactivity.
Manual Power Off
Press and hold for 2 seconds to turn off the scale.
Back to Table of Contents
Replacing the Batteries
- Turn the scale over and open the battery compartment.
- Take out the used batteries and replace them with 2 new 1.5V AAA batteries.
- Replace the battery compartment cover.
Troubleshooting
If your problem is not listed, please contact Customer Support (see page 20).
Warranty Information
Terms & Policy
Etekcity Corporation warrants all products to be of the highest quality in
material, craftsmanship, and service for 2 years, effective from the date of
purchase to the end of the warranty period. Warranty lengths may vary between
product categories.
If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.
Customer Support
Etekcity Corporation
1202 N. Miller St., Suite A Anaheim, CA 92806 USA
Email: support.eu@etekcity.com
*Please have your invoice and order ID ready before contacting Customer Support.
Notes_____
Connect with us @EtekcityUK
Verbinden Sie sich mit uns @EtekcityGermany
Restez connecté sur @EtekcityFrance
Síganos en @EtekcitySpain
Seguici su: @EtekcityItaly
Building on better living.
AU0220GY-M1_0220EK9000_eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>