SUNFLY G9 Wireless Open Ear Headphone Instructions

SUNFLY G9 Wireless Open Ear Headphone

Product Information

The device has been evaluated and meets the general RF (Radio Frequency) exposure requirement set by the Federal Communications Commission (FCC). This means that the device’s radiation emission is within the acceptable limits for safe usage.

Product Usage Instructions

The device can be used in portable exposure conditions without any restrictions. This means that you can use the device in any location or situation where it is typically used, such as in your hand, pocket, or bag.

However, it is important to note that any changes or modifications made to the device that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Therefore, it is recommended to use the device as it is, without making any unauthorized alterations.

Thanks for using the G9 Open Ear Headphone which adopts lasted open ear design and V5.3 chipset solution. Super drivers combined with removable mic make you give more choices in headset, Open ear but less sound leakage careful your privacy.

Package content

Structure Specification

Parameters

Instructions

Basic Function-

• Power On: Long press 3s MFB, white light flashes 3 times.
• Power Off: Long press 35 MFB, orange light keeping on Is
• First Pairing: By first using G9 headset, open the BT set on your devices, then search the BT devices and choose pairing name “G9”, the LED light turn off when connect successfully.
• Pairing Mode: Auto-connecting, if disconnecting, flashing in orange light and white light.

Call Control-

• Answer phone call: Short press the MB once to answer any incoming call
• Reject phone call: Long press the MFB 2 second to reject incoming call
• Hang up phone call: Short press the MB, once again to hang up once done talking
• Last number recall: Double click the MFB
• Game/Music Mode Switch: Click the MFB for 3 times

Music Control-

• Play/Pause: Short press MFB
• Previous song: Long press volume”-” button for 1 second
• Next song: Long press volume”+” button for 1 second

Microphone Control-

• Turn on: Long press volume”+” button for 1 second during a call
• Turn off: Long press volume”-” button for 1 second during a call

LED Indicator-

• In Charging: Orange light keeping on
• Fully Charged: White light keeping on
• Battery low tips: Voice prompt every 3 minutes

Language switch-

• Double click the MFB to select the language in the pairing state, and save it after shutdown

Voice assistant-

• Long press the MFB for 2 second

Factory Reset-

• In the pairing state, click the MFB and volume”-” for 3s, headset will auto-power off after factory resetting successfully.

Save and Maintain

• Headphones should be stored in a cool and dry place. The operating temperature ranges from 0°C to 45°C. Working in an excessively cold, overheated, or humid environment may shorten the battery life.
• After storing for a long time, please charge it again before use.
• The earphone is splash proof, not completely waterproof, please do not immerse the earphone in water.
• Excessive volume of listening to music, may damage your hearing, sound may distortion, and to guide vibration discomfort.
• Clean the headphone with a soft dry cloth.
• Please do not charge immediately after exercise, lest residual sweat in the charging port may cause damage to the earphone circuit.
• Keeping the charging port dry before charging reduces the risk of damage to the headphones.
  Note: Design and specifications are subject to change without prior notice.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can determined by turning the equipment o_ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>