BARI WIFI DAB+ RADIO Ref. nr.: 102.231 / 102.232 / 102.234
INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG MANUAL DE
INSTRUCCIONESMANUEL D’INSTRUCTIONS
Congratulations on the purchase of this Audio product. Please read this manual
thoroughly prior to using the unit in order to benefit fully from all
features. Read the manual prior to using the unit. Follow the instructions in
order not to invalidate the warranty. Take all precautions to avoid fire
and/or electrical shock. Repairs must only be carried out by a qualified
technician in order to avoid electrical shock. Keep the manual for future
reference.
– Prior to using the unit, please ask for advice from a specialist. When the
unit is switched on for the first time, some smell may occur. This is normal
and will disappear after a while.
– The unit contains voltage carrying parts. Therefore do NOT open the housing.
– Do not place metal objects or pour liquids into the unit This may cause
electrical shock and malfunction.
– Do not place the unit near heat sources such as radiators, etc. Do not place
the unit on a vibrating surface. Do not cover the ventilation holes.
– The unit is not suitable for continuous use.
– Be careful with the mains lead and do not damage it. A faulty or damaged
mains lead can cause electrical shock and malfunction.
– When unplugging the unit from a mains outlet, always pull the plug, never
the lead.
– Do not plug or unplug the unit with wet hands.
– If the plug and/or the mains lead are damaged, they need to be replaced by a
qualified technician.
– If the unit is damaged to such an extent that internal parts are visible, do
NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact
your dealer. Do NOT connect the unit to a rheostat or dimmer.
– To avoid fire and shock hazards, do not expose the unit to rain and
moisture.
– All repairs should be carried out by a qualified technician only.
– Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a
10-16A fuse.
– During a thunderstorm or if the unit will not be used for a longer period of
time, unplug it from the mains. The rule is: Unplug it from the mains when not
in use.
– If the unit has not been used for a longer period of time, condensation may
occur. Let the unit reach room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
– To prevent accidents in companies, you must follow the application
guidelines and follow the instructions.
– Do not repeatedly switch the fixture on and off. This shortens the lifetime.
– Keep the unit out of the reach of children. Do not leave the unit
unattended.
– Do not use cleaning sprays to clean switches. The residues of these sprays
cause deposits of dust and grease. In case of malfunction, always seek advice
from a specialist.
– Do not force the controls.
– This unit is with a speaker inside which can cause a magnetic field. Keep
this unit at least 60cm away from the computer or TV.
– If this product has a built-in lead-acid rechargeable battery. Please
recharge the battery every 3 months if you are not going to use the product
for a long period of time. Otherwise, the battery may be permanently damaged.
– If the battery is damaged please replace it with a battery of the same
specifications. And dispose of the damaged battery environment friendly.
– If the unit has fallen, always have it checked by a qualified technician
before you switch the unit on again.
– Do not use chemicals to clean the unit. They damage the varnish. Only clean
the unit with a dry cloth.
– Keep away from electronic equipment that may cause interference.
– Only use original spares for repairs, otherwise serious damage and/or
dangerous radiation may occur.
– Switch the unit off prior to unplugging it from the mains and/or other
equipment. Unplug all leads and cables prior to moving the unit.
– Make sure that the mains lead cannot be damaged when people walk on it.
Check the mains lead before every use for damages and faults!
– The mains voltage is 220-240Vac/50Hz. Check if the power outlet matches. If
you travel, make sure that the mains voltage of the country is suitable for
this unit.
– Keep the original packing material so that you can transport the unit in
safe conditions.
This mark attracts the attention of the user to high voltages that are present
inside the housing and that are of sufficient magnitude to cause a shock
hazard.
This mark attracts the attention of the user to important instructions that
are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the
unit. They would invalidate the CE certificate and their guarantee! NOTE: To make sure that the unit will function normally, it must be used
in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a
recycling center. Ask your local authorities or your dealer about the way to
proceed. The specifications are typical. The actual values can slightly change
from one unit to the other. Specifications can be changed without prior
notice.
Do not attempt to make any repairs yourself. This would invalidate your
warranty. Do not make any changes to the unit. This would also invalidate your
warranty. The warranty is not applicable in case of accidents or damages
caused by inappropriate use or disrespect of the warnings contained in this
manual. Audio cannot be held responsible for personal injuries caused by the
disrespect of the safety recommendations and warnings. This is also applicable
to all damages in whatever form.
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton,
check the contents to ensure that all parts are present, and have been
received in good condition. Notify the shipper immediately and retain the
packing material for inspection if any parts appear damaged from shipping or
the package itself shows signs of mishandling. Save the package and all
packing materials. In the event that the product must be returned to the
factory, it is important that the product be returned in the original factory
box and packed. If the device has been exposed to drastic temperature
fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched
off until it has reached room temperature.
Standby button
Preset
Long press to enter the “Add to favorite” list. Press it briefly to recall the
preset list.
Left cursor/Press to return to the previous menu.
Right Right cursor/View radio info
Volume/Home Rotate to adjust the volume level/Press the knob to return Home (main menu).
Infrared remote sensor
3.5 mm earphone jack
Dial/Select Rotate to browse the menu/Press to confirm a selection or stop the playback.
2.8” color display
Speaker
DC IN Socket
Aux-In Jack
Line out Jack
Telescopic antenna
REMOTE CONTROL
BEFORE YOU START
Please ensure the following is ready:
You have a broadband internet connection.
A wireless broadband router is connected to the internet successfully. The radio supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or G).
You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password. You need to key in the correct code when the radio is connected to the wireless router for a network connection. If you do not know the code/password, please contact the person/technician who set up the router/network for you.
The radio can work via a Wireless network connection (Wi-Fi connection)
GETTING STARTED
Connect the mains adaptor to the radio unit, one end to the DC IN on the radio
and the other end to the mains wall outlet.
Caution: Use only the mains adaptor supplied with the radio. Connecting a
power supply with a different rating will cause permanent damage to the radio
and maybe hazardous. The display on the front of the radio will light up and
show:
Then you can select you preferred language on the radio.
It will ask you if you want to Enable the < Check Network when Power on>,
it is suggested to choose < Yes>. Then the radio will always check the
available WiFi network automatically.
CONNECTING TO YOUR WIFI NETWORK
The screen below will appear. You can choose to proceed to search for
the available WiFi network. If your router has the WPS function, you can
select <Yes(WPS)> to proceed.
It will then start scanning the network. After the search is done, it will
display a list of the available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or
WPA(Wi-Fi Protected Access) code. If your network is not enabled with a
security code, the unit will connect to the router automatically.
Note: The encryption code would have been set up by the
person who set up and configured your network.
Please follow the steps below to enter the encryption code of your router
using the buttons on the radio:
– Rotate the <Dial/Select> knob to browse the character
– Press the < Right> button to skip to the next entry – After you finish
with the entries, press the <Dial/Select> knob to confirm. Do NOT press the
right button again. To use the remote control entering the password: Press <▲>
or <▼> button to select the characters. Press the < ►> button
for the next entry, press <◄> button to delete the character or to amend it.
When the last character is entered, press the button this time.
Do NOT press the <►> button. The radio will start connecting to the network.
After the router is connected successfully, it will display the main menu as
follow: ****
You can now start enjoying the internet radio.
INTERNET RADIO
Choose < Internet Radio> from the menu, you can see several listed
options. To start listening to the radio stations worldwide, select < Radio
Station/Music>.
My Favorite
This is to show the list of your Favorite stations which have been assigned to
the presets. To preset a station:
While you are playing the favorite station, long-pressing the < Preset>
button (on the remote) and the < Add to My Favorite> menu will display.
Press the rotary knob to confirm. The playing station will be added to the
preset list automatically.
The presets will be stored in ascending order. You can store up to 250
presets. Note: Preset 1 to 5 are reserved for your own choice of the dedicated
radio channels. Scroll to choose the desired number to save your favorite
channel. To save more channels after the first five presets are occupied,
press and hold the reset button and it will assign to preset no. 6 onwards.
You can edit your favorite list anytime. Go to Internet radio> My Favourite or
press th e button ( on the remote). When it displays the list of
favorite stations then press the right button. The following options will
display:
Delete – To delete the selected station
Shift up- To shift the selected station by one level up on the ranking
Shift down – To shift the selected station by one level down on the ranking
Rename – To rename the selected station
Play – press and play the selected station
Choose the radio station that you want to make with the above changes.
Then press the button, it will enter into the list with the options
listed above. Then choose your desired action. To recall a preset station:
Press the button ( **on the remote) briefly and choose your desired
station.
Radio Station / Music
Select this option, then you can select your desired radio station by
Category, Genre or Location., etc. Local Radio
If you want to access quickly the radio station located in your area via the
internet, select this function and it will display the list of the stations
available.
History
The radio will memorize the last listened 10 stations. Service Search Stations
You can find your desired radio station by entering the name of the radio. Add New Radio Station
If you cannot find your desired station from the Radio station list and you
have the URL address, you can input the link here and add to your favorite
list.
Note: The URL has to be an audio streaming URL in order to play on the radio.
When the radio station is playing, the display will show a color image
transmitted from the radio station. **
SPOTIFY
A better way to listen at home. Listen to the Bari using the Spotify app as
a remote. Enjoy themusic together. Use your phone, tablet, or computer as
a remote control for Spotify. Go tospotify.com/connect to learn how.
BT
The radio receives and plays music streamed by other BT-device. Choose BT from
the main menu or use the < > button on the remote to find the BT mode. Once it
enters into BT mode, it will be discoverable from other BT devices. 1. Turn on
BT on the BT device and look up the device named “Audio Bari” from the list.
Select it to start pairing. 2. If the connection is successful, it will show
“Connected” on your BT device list. 3. You can start playing music from your
BT device now.
MEDIACENTER
UPnP (Universal Plug and Play)
The device supports UPnP and is DLNA-compatible. This provides the opportunity
to stream music from your other network devices. However, this requires you to
have a compatible device in your network that can function as a server. This
can be e.g., a network hard drives or a conventional PC with e.g., Windows 8
via which access to the shared folder or media sharing is permitted. The
folders can then be browsed and played on the Tuner. Remark: Please make sure your computer laptop is on the same Wi-Fi
network as the Radio before you start using this function.
Music streaming
Once the UPnP/DLNA compatible server is configured to share media files with your radio, you can start music streaming.
On the main menu, select [Media Centre] and choose [UPnP].
It may take a few seconds for the radio to complete the scan for available UPnP servers. If no UPnP servers are found, it will show [Empty List].
After a successful scan is done, select your UPnP server.
The radio will show the media categories available from the UPnP server, e.g. ‘Music’, ‘Playlists’ etc.
Choose the media files that you wish to play. You can set the mode of playback under Configuration>Playback setup. My Playlist You can make your own playlist from the UPnP music files. Choose and highlight the song you want to add to the playlist, press and hold the [Dial/Select] knob, unit the sign appears. The song will be added to My playlist. Clear My Playlist Remove all songs in My playlist to allow a new playlist to be prepared. Note: If you have DLNA compatible servers available, follow the steps
described above to browse the audio files from DLNA compatible devices on the
radio to play.
FM MODE
You can listen to ordinary FM radios without an internet connection. Extending
the telescopic antenna or in another direction/length of the antenna may be
required to optimize the reception level. Choose the FM from the main menu or
use the < > button on the remote to find FM mode. To auto scan the next
available FM station, press and hold the < Left > or <Right> button for 2
seconds, the radio will seek the next available station. If you want to fine-
tune the frequency, rotate the < Dial/Select> knob on the unit or press
the <▲ / ▼> button on the remote control.
Auto preset scan
There is an option to auto preset the FM station. Press the < Dial/Select>
knob (or Select button on the remote), it will ask you whether to Auto Scan or
not. Choose and press
INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG MANUAL DE
INSTRUCCIONESMANUEL D’INSTRUCTIONS
Note: The encryption code would have been set up by the
person who set up and configured your network.
**