Lifesmart HT1041 PTC Tower Heater Instruction Manual

LIFE SMART® is a registered trademark of Supply Chain Sources LLC., All Rights Reserved.

PTC TOWER HEATER
Customer number: HT1041

ATTACH YOUR RECEIPT HERE
Purchase Date ____Serial Number (located on back of unit)

Questions, problems, missing parts? Contact the technical support department at 657-341-0362, 9:00 a.m. – 5 p.m., PST, Monday – Friday, or visit us online at
www.lifesmartcomfort.com
Please have your model and serial number ready

REV1-081420

PACKAGE CONTENTS

PART| DESCRIPTION|

QUANTITY

---|---|---
A| Infrared Heater| 1
B| Easy Carry Handle| 1
C| Control Panel Ipre assembled to Infrared Heater (A))| 1
D| Filter Cover Ipre assembled to Infrared Heater IA))| 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

IMPORTANT SAFETY INSTRUCTIONS

** WARNING:** POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own. Do not plug anything else into the same circuit. If unsure if your home meets this specification,  consult a certified electrician prior to use. Risk of fire, overheating, malfunction, property damage, injury, or even death may result if not adhered to!
• Connect to a properly grounded, 3-prong outlet only. Do not connect the heater to extension cords, surge protectors, timers, direct breakers, or an outlet with other appliances connected to the same outlet. Risk of fire, overheating, malfunction, property damage, injury, or even death may result if not adhered to!
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles (certain models) or wheels to move this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 ft . (0 .9 m) from the front of the heater and keep them away from the sides and rear of the heater.
• Extreme caution is necessary when any heater is used by or near children, invalids, pets, or when the heater is left operating unattended.
• Always unplug the heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner. Contact the manufacturer for resolution options.
• Do not use outdoors. Exposure to outdoor elements such as rain, snow, sun, wind, or extreme temperatures may cause the heater to become a safety hazard.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations, nor any locations that use GFCI outlets.
• Never place the heater where it may fall into a bathtub or other water receptacles.
• Do not run the cord under the carpet. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas and where it will not be tripped over.
• The heater must be plugged into a wall outlet that is a dedicated circuit with a minimum 15 amp rating on that individual circuit.
• To disconnect the heater, first, turn the power button to the OFF position and then remove the plug from the wall outlet.
• Do not allow foreign objects to enter or block any ventilation or exhaust opening as this may cause electric shock, fire, or damage to the heater.
• Allow at least 3 ft . of unobstructed space to the front and rear of the heater to allow for maximum heat, air, and ventilation flow.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored, nor use flammable solvents to clean the heater. Keep the heater dry at all times.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Do not use abrasive solvents to clean the heater as it may cause damage to the finish or casing.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use it on soft surfaces, like a bed, where the opening may become blocked.
• Always plug heaters directly into a wall outlet/receptacle. Never use an extension cord or relocatable power tap (outlet/power strip).

SAVE THESE INSTRUCTIONS

Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, turn on the heater using the control panel or supplied remote control (if provided) on the heater.
Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the internal components of the heater reach a certain temperature that could cause overheating or possible fire,  the heater will automatically shut off.
WARNING: TO PREVENT ELECTRICAL SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT OF THE RECEPTACLE AND FULLY INSERT.

WARNING: It is normal for the power cord to feel warm to the touch. However, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage .

Specifications

Voltage Rating
Power  consumption
Unit Size
Unit Weight| 120 V (60 Hz)
---|---
1,000 W/1,500 W
5 .91 in . (W) x in . 7 .28 (D) x 17 .16 in . (H)
3 .98 lbs .

FREQUENTLY ASKED QUESTIONS

Please review these frequently asked questions on the next few pages prior to using your heater.
Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. Why is this happening?
A . This is normal. This heater is treated with a special heat- safe/resistant coating. This odor will sometimes be present when the box is opened. When the coating is exposed to heat, it produces this particular odor during the first few hours of operation. This will dissipate after the break- in period. If you are sensitive to odors, you may want to pre-burn the unit in a garage with the door open until the initial odor dissipates.
Q. If my heater runs on its max wattage setting, how many BTUs is that?
A. This heater is intended to be used as supplemental heat in areas most needed. It may take several minutes to several hours to heat your area, depending on various factors.  The below chart provides BTU translations for different wattages.

Q. Once I plug the unit in and turn it on, how long will it take to heat my room?
A. The heating process in the heater begins immediately upon powering on and setting the desired temperature above the ambient temperature. A noticeable change in the ambient temperature of the room will vary due to variables such as the location of the heater (in the home), floor plan and size of the room, how well the room is insulated, how many doors/windows, how much bare concrete (acts as a heat sink with any type of heating), the opening and closing of an exterior door, long hallways, high ceilings, etc.  Customers with smaller rooms experience quick heat changes. Rooms with larger and open floor plans can expect up to 24 hours to completely heat up.
Q. I do not have a grounded outlet. Can I use adapters, a 2-prong power strip, or remove the ground prong from the cord?
A. NO! If you do not have a grounded outlet, contact a certified electrician for advice. Removing or altering any part of the heater’s original design or intent (including the power cord) will void the warranty and make you liable for any unexpected or hazardous results.
Q. Can I use more than one heater at a time? Can I use the heater and another appliance at the same time?
A. Yes, but make sure they are not plugged into the same circuit. Each heater requires its own minimum 15-amp circuit with no other items plugged into that circuit or outlet.  This is because heaters are considered appliances and draw out high amperage. If you are unsure your circuit meets these requirements, verify with a certified electrician.
WARNING: Risk of fire, damage to property, or injury may result if requirements are not met.
Q. My heater’s power cord gets warm. My cord is showing signs of heat or melting at the outlet. Is this normal?
A. A warm power cord is normal. These power cords are rated safe for up to 105°C/ 221°F by the UL, CSA, or ETL. The exception is, if you detect heat, smoke, or signs of melting at the contact point of the wall outlet, it may be due to loose or worn wall contacts (or arcing). Please stop using the heater immediately, contact warranty support for a  replacement power cord, and have a certified electrician replace the wall outlet as soon as possible.

PREPARATION

Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet. Only operate the heater in an upright position.
Insert two AAA batteries into the remote control before using (batteries not included). *(Not all products will include a remote control .)
Please note that infrared heaters do not heat like a traditional space heater. You should not expect infrared heaters to blow hot air like a traditional space heater. Infrared heaters heat objects not air . Infrared heaters are intended to supplement an already heated, insulated room. Square footage specifications assume a single enclosed room, not an entire home. Infrared heaters do not heat through walls, floors, and are not intended to replace the main heat source. Infrared heat can take at least 24 hours to warm a room but operate much more efficiently to maintain the desired temperature. Infrared heaters will not work well in uninsulated unheated spaces like screened-in porches, RV’s,  garages, unheated basements, etc.

TROUBLESHOOTING

The heater does not turn
on.| 1 . The power cord is not plugged in.
2 . The electricity at the main fuse of the box is not working.
3 . The thermostat on the heater is set lower than the room
temperature.| 1 . Plug the power cord into an electrical outlet.
2 . Check the electricity at the main fuse box.
3 . Increase the thermostat temperature on the heater for a higher heat setting.
There is no
heat| 1 . The unit is in Fan Only mode.
2 . The temperature needs to be increased on the heater.| 1 . Turn the MODE dial to one of the two
heat settings 1 (1,000 W), or 2 (1,500 W).
2 . Turn the THERMOSTAT dial clockwise
until you hear a click.
If the unit
shuts down| 1 . There was a power outage.
2 . The unit overheats.| 1 . Turn MODE to OFF and Thermostat to High.
2 . Unplug the unit and wait 5-10 minutes, then plugin and turn MODE ON.

CONTROL PANEL

wall outlet
2| Thermostat Dial| Increases and decreases desired temperature
3| Oscillation Button| Engages / Disengages oscillation feature
4| Mode Dial| Toggles between Off / Fan / Low / High Modes

OPERATING INSTRUCTIONS

1. Turn the heater ON by moving the MODE dial on the control panel (C) to the “1” position. To Power, OFF move the MODE dial to the “0” position on the control panel  (C) .
   Once the power is off, the heating elements and fan will stop working. This is a normal function.

2. Select a heat setting by turning the MODE dial on the control panel (C) to the 1, 2, or fan-only position.
   Power for setting 1 mode is 1,000 W; setting 2 modes is 1,500 W . FAN mode is a cooling function. When FAN mode is chosen, the heater will operate at approximately 15 W.

3. Set the thermostat by turning the THERMOSTAT dial clockwise or counterclockwise on the control panel (C).
   You can set the temperature on the heater anywhere between (-) and (+) of the thermostat. Turn the THERMOSTAT dial towards (-) or (+) to get a lower or higher desired temperature. Once you have chosen the desired temperature, the heater will cycle on and off to maintain the desired room temperature. For continuous heat, set the thermostat towards (+).

4. To Engage the oscillation to feature press the OSCILLATION BUTTON on the control panel (C). To Disengage repeat these steps.

CARE AND MAINTENANCE

WARNING: Before performing any maintenance task, turn off the unit, unplug the unit, and allow it to cool completely.

1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
   CAUTION: DO NOT let the liquid enter the heater.

2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.

3. DO NOT immerse the heater in water.

4. Wait until the unit is completely dry before use .

5. If you will not be using the heater for a while, take the batteries out of the remote control and store them for future use.

6. Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

CLEANING THE AIR FILTER

1. Clean the air filter (2) after three months or if it appears to be blocking airflow. With the heater unplugged, remove the two filter screws (1) as illustrated below. Clean all parts of the filter assembly and allow parts to completely dry.
2.  Reassemble and reinstall the filter (2).
   WARNING: Do not use the heater without the filter assembly in place.

ONE-YEAR LIMITED WARRANTY

The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This warranty is subject to personal use only,  commercial or rental applications will not be covered.
This product is made with the highest quality materials and is warranted to be free from defects in materials and workmanship at the time of purchase. This limited warranty applies to products manufactured or distributed by the manufacturer, are delivered in the continental United States or Canada, and extends to the original purchaser, or gift recipient. This warranty becomes valid at the time of purchase and terminates either by the specified time frame listed above and/or owner transfer . Any refunds or monetary compensations must be claimed through the place of purchase (retailer), and not through the manufacturer. Any extended warranties (warranties that cover above and beyond this manufacturer warranty) that are sold through a retailer or third party, are not directly correlated with this products’ limited warranty and may be redirected to said retailer or third party for coverage.
This warranty extends through the manufacturer of the product and covers functional parts only. Cosmetics are not covered unless unequivocally determined it is a  workmanship defect. Shipping damage should be addressed with the shipping company, retailer, or place of purchase, not the manufacturer unless the manufacturer was the direct shipper.
The manufacturer’s sole obligation under this warranty shall be limited to furnishing the original purchaser replacement parts for units deemed repairable by the supplier’s warranty department. The purchaser is responsible for insuring any parts shipped or returned if desired. The purchaser is responsible to prepay any shipping charges (both ways) including, but not limited to taxes and duties. All exchanged parts and products replaced under this warranty will become the property of the manufacturer. The manufacturer reserves the right to change manufacturers of replacement parts or products for use, in order to cover any existing warranty.
The purchaser may be asked to provide the supplier with proof of purchase documents (including the date of purchase) if requested. Any evidence of alteration, erasing, or forgery of proof of purchase documents will be just caused to VOID this limited warranty. Products, in which the serial number has been defaced or removed are not eligible for warranty coverage.
This warranty does not apply if the unit has been subject to negligence, fabrication, misuse, abuse, or repairs, alteration by non-manufacturer authorized personnel, inappropriate installations, or any cause beyond the control of the manufacturer. Examples of warranty invalidation may also include, but are not limited to:

• Use of lacquer or paints in (and around) the heaters
• Heater placed on non-approved surfaces
• Electrical requirement deficiencies (15-20 amp dedicated outlet)
• Use on extension cords/timers/surge protectors/GFCI
• Outdoor applications
• Normal wear/tear/weathering
• Pet/consumer accidents

The manufacturer shall not be liable for any loss due to use (or misuse) of the heater or other incidental or consequential costs, expense, or damages without irrefutable foundations. Under no circumstances shall the manufacturer or any of its representatives be held liable for injury to any person or damage to any property, however arising.  Any implied warranty shall have a duration equal to the applicable warranty stated above. Specifications are subject to change without notice or obligation.
This limited warranty gives the original purchaser specific legal rights. Other rights may vary from state to state.

REPLACEMENT PARTS LIST

For replacement parts, call our technical support department at 657-341-0362, 9 a .m . – 5 p .m ., PST, Monday – Friday

PART

| DESCRIPTION|

PART #

---|---|---
A| Power Board| 01.01.1.021
B| Fan-DC| 04.04.1.243
C| Thermostat| 04.05.1.200
D| Oscillation Button| 04.05.1.201
E| Mode Switch| 04.05.1.202
F| PTC Heating Element| 04.04.1.242
G| Manual Reset / Limit Sensor| 04.04.1.245

PLEASE REMEMBER TO REGISTER YOUR WARRANTY:
web: www.lifesmartcomfort.com
email: cs@scsources.com
LIFE SMART®is a registered trademark
of Supply Chain Sources., All Rights Reserved.
Printed in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>