LifeSmart LS203WH DEFED Motion Sensor User Guide

June 4, 2024
LifeSmart

LifeSmart LOGO Setting up your DEFED Motion Sensor
User Guide
V 1.0

INTRODUCTION

LifeSmart DEFED Motion Sensor is a wireless passive infrared sensor to detect the moving human body within a certain range and report the intrusion alarm in time. The detection range is up to 12M, and the detection angle is up to 90°. It is recommended to install the sensor at a height of 2.4 meters to obtain a better detection performance.

LifeSmart LS203WH DEFED Motion Sensor - INTRODUCTION

  1. Indicator

  2. Lens

  3. Power on/off switch

  4. Tamper protection button
    LifeSmart LS203WH DEFED Motion Sensor - INTRODUCTION 2

  5. Wall-mount bracket

  6. Screw hole *8

SPECIFICATIONS

Size| 10059.267.3mm (with wall-mount bracket)
10059.250mm (sensor only)
---|---
Communication protocol| CoSS
Communication distance| 800m (open field)
Operating temperature| -5∼45°C
Operating humidity| 5∼90%
IR detection range| Up to 12M
IR detection angle| Up to 90°
Material| ABS+PC
Battery type| CR123A 3V
Standby time| Up to 7 years (standard environment)

SET UP
Notice: DEFED Motion Sensor needs to be paired with the DEFED Alarm Station or LifeSmart Smart Station to join the system.

  1. After configuration of the alarm station or smart station, choose “Add Device” in LifeSmart App, select “DEFED Motion Sensor”, and enter pairing mode.
  2. Follow the instruction on the app to finish paring.
  3. If a time-out error occurs, please repeat steps 1-3 until it’s successfully paired.

INSTRUCTION

  • DEFEND Motion Sensor adopts passive infrared technology to sense moving bodies. You can install it at the entrance or in corridors to detect intrusion. With the temperature sensing element, this sensor can also display the temperature and moving detection status via the LifeSmart app.
  • DEFED Motion Sensor can only work under one alarm station or smart station at the same time. If the sensor is activated to the pairing mode and added to another alarm station or smart station, it will be automatically removed from the

INTRODUCTION

The original alarm station or smart station and the status of the sensor in the original system will be displayed offline.

  • When the alarm system is armed, the sensor will detect and report moving events within a certain range to your mobile app.
  • You can test the signal strength for fast installation in LifeSmart App.

WARRANTY DESCRIPTION

Thank you for purchasing this LifeSmart product. In order to protect your rights, please read the following content carefully: The warranty period of our company’s products is one year from the date of purchase or longer if local laws impose a longer minimum term, in which case the minimum term is the warranty period. During the warranty period, for any faults caused by the product itself or for quality problems that arise under normal usage, LifeSmart will provide a free replacement.

User support e-mail address
support@ilifesmart.com
Website
iot.ilifesmart.com

ATTENTION
The following conditions are not covered by the warranty:
Product failure or damage caused by installation, use, and maintenance that is not in accordance with the product instructions;
Products beyond the warranty period;
Products that have the barcode tampered with or removed;
Devices that have been tampered with or customized outside of LifeSmart Terms Of Service as on the LifeSmart APP and website;
User-caused damage, such as inappropriate voltage input, high temperature, accidental spillage, physical damage, etc;
Product failure or damage caused by force majeure such as earthquakes, fires, or floods;
Product failure or damage caused by other problems except for the product itself.

DECLARATION

LifeSmart is a trademark of Hangzhou LifeSmart Technology Co., Ltd. As for the trademarks, product logos, and product names from other companies presented within this manual, they are possessed by the holders of their own rights. Without our written permission, no entity or individual shall extract, copy or disseminate in part or the whole of the manual contents in any form. Due to product version upgrades or other reasons, the content of this manual may change. Our company reserves the right to change the contents of this manual without any notice.
This manual is used only for instructional purposes. We strive to provide accurate information in this manual, but we are not able to ensure that the content of this manual is current. Statements, information, and advice in this manual do not constitute any expressed or implied assurance. Updated manuals are available on our website at iot.ilifesmart.com or by contacting our team.
DECLARATION OF CONFORMITY
Hereby, LifeSmart declares that the radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://global.ilifesmart.com/ce/docs/
Notice: This device may be used in each member state in the EU.
WEEE Directive Compliance
Devices labeled with this symbol should not be disposed of with other household wastes. It shall be handed over to the applicable collection point for the recycling of waste electrical and electronic equipment.

Manufacturer: HANGZHOU
LIFESMART TECHNOLOGY CO., LTD.
Address: 22nd Floor, Yuesheng Internation-al
Center, 518 Pinglan Road, Xiaoshan
District, Hangzhou, Zhejiang, China
Facebook: ilifesmarthome
Twitter: ilifesmarthome
Copyright © 2021 LifeSmart Inc.
All Rights Reserved.
P/N: 88007960 Al

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals