HIMO H1 Folding Electric Scooter User Manual

H1
FOLDING E-BIKE

Precautions for use

Strictly observe traffic rules
Do not harm yourself by lending your car to someone who can/ handle it. When riding in rainy and snowy weather, the braking distance will be extended. Slow down and walk slowly. Avoid traveling in bad weather such as heavy rain. Before riding, check that the braking system is working properly and clean the reflector to avoid occlusion. It is recommended for people aged between 16 and 50 and weighing less than 75kg. Cyclists under the age of 16 should ride under the supervision of adults. It is not recommended for people outside the scope to use the bicycle. If it is really necessary to use the bicycle, it should bear additional risks caused by different body functions

Safe use of the product

Please strictly abide by the traffic laws and regulations, and prepare protective equipment such as helmets and protective gear before riding, and pay attention to driving safety. It is strictly prohibited to ride with one hand holding handlebars and both hands off handlebars. Do not park at building doors, evacuation staircases, walkways, and exits. Do not charge and park in the residential building, charging should be away from combustible materials, please charge according to the specified time, charging time should not be too long. Proper use and maintenance of batteries, old batteries shall not be dismantled without authorization, should be organized by professional departments to recover. Understand the usage and warning terms of the charger, and use the original charger.

Preparation before riding

The power supply circuit, lighting is good.
Before riding, please check whether all parts of the car are clamped tightly to avoid an accident.
Check the reflector for damage or contamination before cycling.
Vehicle coding position map.

**Electrical schematic

**

****Under the condition of full power, the endurance is 75kg, the tempera- ture is about 25t, the environment of flat road is still without wind, and the driving condition is measured at 15km/h uniform speed under the energy-saving mode. The actual endurance will be different due to factors such as load, temperature, wind speed, road surface and operating habits.

Main technical parameters of the bike

Size of outer shape (riding condition) ………………………………955 x 840 x 485mm
Size of outer shape (minimum storage) …………………………………..455 x 320 x 230mm
Size of outer shape (thinnest for storage) ………………………….630 x 560 x 135mm
Weight ……………………………………………………….14.5kg
The largest load …………………………………………….75kg
Highest speed ………………………………………………………. 18km/h
Climbing ability……………………………………………….. <5°
Range …………………………………………………………………….<30km
Brake distance ………………………………………………..<5m ( Dryness )
Main technical parameters of the motor
Motor type ………………………………………………………..Dc brushless low-speed motor
Rated power …………………………………………………….180W
Maximum speed ………………………………………………550r/min
The rated voltage ……………………………………………………..36V
Maximum output torque …………………………………………..7N.m
The spec. of motor
The input voltage ……………………………………………………100-240V AC
The output voltage ……………………………………………………42V
The output current …………………………………………………..1.5A
Charging time…………………………………………. …………..4-6h
The spec. of battery
Battery type ……………………………………………………..Ion battery
Capacity …………………………………………………………….7.5AI-I
Nomhal voltage ………………………………………………….36V
Under voltage value …………………………………….30± 1V

About H1
Before riding, check whether the safety buckles of all parts of the bike are tightly locked to avoid safe accidents

Folding steps **

Riding Operation**

Long press 2s button: power ON / OFF Press the button 2 times in a row: headlight ON / OFF| Turn the speed control knob in the direction shown in the figure to accelerate the vehicle| Turn the dial brake lever in the direction shown in the figure to complete the vehicle’s electronic brake
---|---|---

About the battery

Instructions before using lithium battery
Before use, confirm that the battery model Is the original battery of the whole vehicle. Do not use other brand batteries at will Check the appearance of lithium battery is in good condition, there is no damage, leakage. hot water and smoke In order to ensure the safety of transportation, the ex- factory electric quantity of the battery s about 30%. Due to the self- consumption of electricity during the transportation and storage cycle, the electric quantity is low or no electric quantity during the first use. This is a normal phenomenon.

Using the environment
The optional operating environment is 10° -45° The usable capacity at -10′ is 70%, the usable capacity at 0′ is about 85%, and the usable capacity at 25° is100% If the battery has an odor, heal, deformation, and other abnormal conditions, please immediately stop using; Keepaway from batteries and contact aftersales.

Warning
I ate better/ ES is a part that can be repaired by the user. If there is any abnormal phenomenon, please x(40cl the after-sales department for maintenance. the battery to produce heal, smoke, We, explosion. Unauthorized dismantling of the battery will not be subject to the three-package pokey and may cause

Charging environment
Use a battery charger for charging, do not use other brands or model chargers for charging. Please charge the battery at the ambient temperature of 0° -40° to ensure that the surroundings are free from flammable substances and well ventilated. Charging time description: the charging time of the battery should not exceed 12 hours. Excessive charging cell affect the battery life and there are safety risks. In the early stage of charging, the electric quantity rises quickly, while in the later stage it rises dm*. This is the procedure set for charring safety, with is normal. When charting in winter, when the outdoor temperature is low and the environment is below Ot, the battery will stop charging. This is a normal phenomenon. Please place the battery at an appropriate ambient temperature for charging to ensure the charging effect. Do not charge outside when bad weather During the charging process, the charger has a temperature rise effect and the surface temperature is high, which is a normal phenomenon. Please feel free to use it and pay attention to avoid children% touch

Storage environment
After the battery is placed n the car, the battery power wil be slowly consumed due to the vehicle’s working reasons. The vehicle can be placed for up to two months. The meter shows that the power decline is normal. Please store the battery at the ambient temperature of 0° -25*. Do not store the battery in an environment higher than 45, otherwise, the battery will suffer Irreversible capacity attenuation. If the vehicle is not used for a long tire (such as winter, summer, or other special cases), the battery must be taken out and stored separately, and regularly maintained and charged. The longest maintenance and charging time is 2 months, otherwise, it may lead to electricity The pool power is completely exhausted, resulting in irreversible damage. For such problems, the battery failire MI no longer be within the range of three guaranteed policies. The most suitable storage capacity of the battery is 50%. tithe battery is less than 10% or more than 9091/41one-term storage vAll lead to irreversible capacity degradation of the battery. Avoid storing the battery h a risky location where a drop could cause uncontrollable damage to the battery and could cause leakage, heat. smoke. fire or explosion.

Battery removal and charging instruction

Battery removal and charging Open the battery box wrench and pull it out to remove the battery.
Note: If you can’t pull it out smoothly, please push it upwards and pull it.

an electric bike will sleep automatically if the battery is not used for a long time, you need to manually press the battery

The electric vehicle can start normally only after the power off switch at the rear. Lift the protective cover to connect the charger output plug to the battery, and then connect the charger input plug to the mains After the charging is completed, disconnect the input terminal of the charger from the mains, and then disconnect the input terminal of the charger from the battery.

COM PONENT DESCRIPTION

Maintenance and repair

Regular vehicle inspection
Whether the fasteners are locked and whether the joints in each part are normal; Whether the tread pattern of the front and rear tires is worn and cracked, whether the driving, whether the driving system is smooth; ls the braking system working whether the brake system is normal Whether the locking mechanism of folding part is normal

Method of vehicle storage
When the product is not used for a long time, please do not store it in the outdoor environment, under bright light and subzero temperature for a long time, and the distance from the heat source (heating equipment, etc.) should not be less than 2M; Store in a dry, clean, well-ventilated indoor environment with a temperature of 10° -45° and relative humidity of no more than 90%; If you do not use the car for a long time, pay attention to do regular charging (generally about two months apart) to maintain the battery performance. This product should not contact with corrosive liquid to avoid any mechanical impact and pressure

Transport
In the process of transportation, should not be subjected to violent mechanical impact, sun,rain, chemical corrosive substances, and harmful gas erosion; In the process of loading and unloading, the product should be handled gently, strictly preventing falls, roll, and pressure.

Maintenance and cleaning instructions
Do not flush with water to avoid potential accidents caused by wetting of internal electronic parts and wiring; Please use a neutral cleaner, gently wipe the dirt on the surface of paint or plastic parts with a cloth, and then wipe it clean with a dry cloth. Please use lubricating oil to clean the metal parts of the car body for maintenance. Do not oil the brake parts to avoid brake failure and danger.

Troubleshooting

battery is under voltage, charge the battery 2. Check if the battery power switch is tumed on
Turn on the power, turn the handle, the motor will not start| 1. in the break state
2. Rotary handle failure, motor failure, controller failure| 1. Whether the brake lever is in the braking state
2. Observe the alarm code of the instrument and contact customer service
Insufficient range| 1. Insufficient battery charge
2. Driving under complex road conditions, frequent Insufficient range braking start
3. Battery aging or normal attenuation
4. Low ambient temperature| 1. Check if the charger is damaged
2. Develop good driving habits
3. Replace the battery 4. It is normal
The battery cannot be charged| 1. The charger plug is not plugged in
2. The battery temperature is too low, the battery cannot be charged temperature is too high
3. Battery Undervoltage 4. The charger is damaged| 1. Check if the charger plug is loose
2. Wait for the battery to resume charging temperature
3. Contact customer service
4. Check if the charger is working properly
No response from the electronic brake| Vehicle is not powered| The vehicle must be powered on before the electronic brake can brake normally

ROHS

The name and content of harmful substances in the product
Parts name| HAZARDOUS SUBSTANCE
PB| Hg| Cd| Cr(v1)| PBB| PBDE
Display| O| O| O| O| O| O
Head lump| O| O| O| O| O| O
Tail lamp| O| O| O| O| O| O
Battery| O| Χ| O| O| O| O
Controller| O| Χ| O| O| O| O
Charger| O| O| O| O| O| O

1, This form is prepared in accordance with the provisions of SJ/T 1136 0:Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit set by GB/T 26572. )(indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572. http://weixin.qq.com/r/YzgIEMjE4pWdrYxz921x
The principal: Shanghai HIMO Electric Technology Co. LTD
Manufacturers: Tianjin Fuji-ta Technology Co. LTD
Producer: Tianjin Fuji-ta Technology Co. LTD
The manufacturer adds: Taian road and AIMA road, south distr development zone, Tianjin
Distributor: Pammi Pty Ltd 174
Address: Broadway Chippendale 2008 Australia
Warranty and Support Email:support@panmi.com.au
Web: www.panmi.com.au/warranty
Phone:  1800 070 031

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>