microlife A6-PC Automatic Blood Pressure Monitor Instruction Manual
- June 6, 2024
- microlife
Table of Contents
Using the AC power adapter
You may also operate this monitor using an AC adapter. Use only the included
AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the right side of the
monitor.
c) Plug the AC adapter into a 110 V power socket (the U.S. or Canada).
d) Test that power is available by switching the screen lock located on the
right side of the monitor off and on. The screen display will be visible after
pressing START/STOP if
the power is available.
Note:
No power is taken from the batteries while the AC adapter is connected to the
instrument.
If the power is interrupted during a measurement (e.g., by removal of the
adapter from the wall socket), the instrument must be reset by removing the
plug from the instrument.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>