Glacor Sound 1 Wireless Earphone User Manual

Glacor Wireless Earphone

USER MANUAL

Thank for purchasing the Glacor Wireless Earphones. Please read this manual before using your device as it contains the safety guidelines and operating instructions.

INCLUDED IN THE PACK

• Wireless earphone (L/R)
• Charging box
• 3 pairs of Ear tips (Large, medium and small)
• Micro-USB cable
• User manual

OVERVIEW

CHARGING BOX WORKING STATUS

Before first use, you must fully charge the earphones. To charge the charging box and earphones, place both earphones inside the charging box, and connect the Micro-USB cable to any powered USB port and the charging port to the charging box.

Charging box display intelligently monitors power level

Charging box power indicator: The LED display shows the battery level of the charging box. The power is between 1%-100%.

Left earphone battery indicator: There are 5 grids which indicates the left earphone charging level. Each grid represents 20%, when it is fully charged to 100%, the 5 grids will be lit.

Right earphone battery indicator: There are 5 grids which indicates the right earphone charging level. Each grid represents 20%, when it is fully charged to 100%, the 5 grids will be lit.

INTELLIGENT CHARGING

1. Earphone charging: When the earphone is placed in the charging box, it will automatically start charging. When putting the earphone into the charging box, press gently so that the charging contact on the earphone can align with the charging pin in the charging box.
   
   Earphone indicator light
   Solid red indicates Charging
   Lights off indicates Fully charged
   The left/right battery indicator will display the corresponding charging level and it will turn off within 5 seconds of full charge.

2. Charging the charging box: Connect the Micro-USB cable to any powered USB port and the charging port to the charging box. The power indicator will display the corresponding power level, between 1% – 100%.

Charging box as mobile battery function

The portable charging case has built-in 3000mAh battery, which can serve as a power bank to charge your mobile phone. To use, fully charge the battery case, then insert the mobile phone data cable into the USB output port on the charging box, and directly charge the mobile phone. Like a regular power bank, the charging box power indicator will display the battery percentage of the box, and the display will go off when the phone battery is fully charged or when the charging box battery is depleted.

SELECTING EARTIPS

The Glacor wireless earphone is an in-ear earphone and relies on a tight seal between the eartips and your ear canals to deliver good bass response and overall sound quality. Three sizes of eartips are included to help you choose the one that is most suitable for you. We recommend trying all three sizes and selecting the ones with the best sound and comfort for your ears.

Reminder: Your left ear and right ear may be suitable for different sizes of ear tips (as in A). Insert the earphones with the eartips into your ear canal, adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal. If your music sounds tinny or lacks bass, try another eartip (as in B).

PAIRING

Remove the left and right earphones from the charging box, they will automatically turn on and flash blue light simultaneously, then the left and right earphones will automatically pair and synchronize.

To pair the earphones with your mobile phone, press the touch button on the left earphone and it will flash red and blue lights alternately which indicates that it is in Bluetooth pairing mode. Then, open the Bluetooth settings of your mobile phone and select “Sky-Free” in the available device list to complete the pairing process.

Subsequent use

Remove the earphones from the charging box, they will automatically reconnect to the last paired Bluetooth device that is in range. To reconnect manually, open the Bluetooth settings on your mobile phone and select “Sky-free” from the available device list. You can also use just the left earpiece as a mono headset by leaving the right earpiece in the charging box.

Left and right earphone repairing

In a situation whereby the left and right earphone pairing fails, i.e. they are not synchronized, take the earphones out of the charging box, they will both flash red and blue light alternately at the same time indicating that they are both in Bluetooth pairing mode, then double tap the touch button of the left earphone to synchronize the earphones and begin to use them normally. (The left earphone flashes red and blue light alternately after the pairing is successful, and the right earphone turns off).

L/R EARPHONES BASIC FUNCTION OPERATION

1. Music Play/Pause: Tap the touch area of either the left or right earphone.
2. Switching to previous or next track: When in music play back mode, double tap the left earphone touch area to switch to the previous track; Double-click the right earphone touch area to switch to the next track.
3. Answer/hang up a call: When the earphone is connected to the phone, double tap the touch area of the L or R earphone.
4. Reject the call: Press and hold either the L or R earphone touch area for 2 seconds in the incoming call state.
5. Volume adjustment: Press the L earphone touch area when entering the music playback mode, the volume can be gradually reduced (-). Press the R earphone touch area to gradually increase the volume (+). When the volume is adjusted to the maximum volume there will be an alarm tone.
6. Siri wakeup: Tap the L-earphone or R-earphone touch area three times.
7. Power on: When the earphone is off, press and hold the touch area for about 2 seconds.
8. Power off: When the earphone is on, double-click and press the touch area for about 3 seconds.
   (Supports dual earphones stereo calls, and also supports single earphone calls)

SHUTTING DOWN

1. Place both earphones (L/R) into the charging box and they will automatically shut down.

2. Disconnect the earphones (L/R) from your mobile phone’s Bluetooth.
   After few minutes of no device connection, the earphones will automatically shut down.

3. Press and hold the touch area of either the L/R earphone for about 3 seconds.

PARAMETERS

WARNINGS/ SAFETY GUIDELINES

1. This unit must be charged with the provided charging cable. The micro USB cable should be connected to a 5V (1A-2A) power adapter or a 5V (1A-2A) car charging head. It is recommended to charge the charging box with a power adapter of 2A or less.
2. Only use the original charger or computer port to charge the unit. Do not use cheap and inferior chargers.
3.  Bluetooth signals are affected by the environment and connection distance. Please do not use in strong electromagnetic interference and radiation environments.
4. The life span of the battery will be significantly reduced if your headset is not charged for a long period of time. It is recommended to charge your earphone and charging box every 30 days.
5. To prevent fire or shock hazards, do not expose this unit to rain or moisture. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried.
6.  If you are using a pacemaker or other electrical medical devices, you should consult your physician before using this product.
7. Use of earphone will impair your ability to hear other sounds, therefore use caution while using your earphone when you are engaging in any activity that requires your full attention.
8. We may make the changes for this product without prior notice to you for the software or the hardware upgrade and modification, please refer to the actual product as final

CAUTION

Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all time for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds. It is advised to turn the volume on your device all the way down before connecting your headphones, then  gradually increase the volume until you reach a comfortable listening level.

CLEANING INSTRUCTIONS

• Remove ear tips from earphones
• Take a cotton swab damp with a small amount of rubbing alcohol or soapy water. Swab the body of the earphones and eartips.
• Allow the earphones and eartips to dry completely.
• Put the eartips back on the earphones, making sure they are fitted securely

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>