global sources BC56 Bluetooth Car Charger User Manual

global sources BC56 Bluetooth Car Charger

Thank you for purchasing our Bluetooth car charger! In order to have the best performance experience, please read the manual carefully before use!

Product introduction

This product is a car-specific car Bluetooth player, built-in advanced Bluetooth and WMA.MP3, WAV, FLAC decoder chip, can play music files inside U disk, wirelessly transmitted to car audio, no need to modify your car can easily Make your music enjoy while driving. More important is the purity and clarity of the special sound of DSP technology. We hope to bring you unlimited enjoyment of the music.

Schematic Appearance

Description：

1. MIC
2. LED display window
3. Short press : Previous song/ long press to enter FM mode
4. Long press 2s to shut down/ short press for mode switch
5. Short press: Next song/ long press to enter FM mode
6. Play/pause/answer/redail/long press to activiate the SIRI assistant
7. Adhensive zone
8. TF card slot
9. USB jack
10. 2.4A output
11. QC3.0 output
12. Cigar connector
13. Adhensive pad

Features

1. Support all types of vehicles
2. LED display
3. Support QC3.0 fast charge output
4. Support QC3.0 protocol /USB Power Delivery QC 3.0 protocol /Quick Charge 3.0/2.0 protocol /Huawei FCP/SCP protocol / Samsung AFC protocol /USB BC1.2 DCP /Support Apple 2.4A charging specification
5. Support stereo FM transmission technology
6. Support TF card music player
7. Support WMA, MP3, WAV, FLAC music format files
8. Automatic power off memory function
9. bluetooth supports A2DP, AVRCP, HFP, HSP
10. bluetooth V5.0
11. bluetooth hands-free calling
12. Support DSP technology
13. Battery voltage detection
14. Short press any key to light up after the fake power off

Operation instructions

1. Insert the machine into the cigarette lighter of the car. After the power supply, the product will automatically enter the power-on state. LED display: HI—battery voltage—Bluetooth–FM frequency.
2. Turn on your car FM radio, and adjust the frequency of the product same as your car radio, then you can enjoy music from your car stereo.
3. Adjust the FM frequency: Long press the / button to enter the FM state. When the LED display frequency flashes, long press to fast adjust FM; short press for slow frequency modulation from 87.5~108MHZ . Three seconds do not operate to exit the frequency selection.
4. Please open Bluetooth on your mobile phone and search for the device “BC56” from the phone menu list.
5. Choose the device “BC56”
6. Choose “BC56” in the menu of the phone and select the connection as “hands-free device” in the authorized device.
   Matching connection for additional devices
   At boot time, the Bluetooth car hands-free will only automatically start connecting to the matching device that was connected last time.

Note: Some phones can be automatically connected when the Bluetooth car is powered on again. Some phones may need to grant permission for each connection. You can set it to “Automatically connect.” For more information, please refer to the phone’s user manual.

1. Use bluetooth hands-free calling (When your bluetooth hands free is idle or playing music)

2. Dial number
   In the connected state, the phone number is directly dialed out by the mobile phone, and the sound is automatically sent from the car audio speaker.

3. Answer the phone
   In the connected state, when a call is made, press ” “directly to answer the call. In the answering state, press the button or the button to switch between bluetooth and the hands-free phone. Press the ” button again to hang up the phone.

4. Reject the call
   When a call comes in and you don’t want to answer it, long press to reject the call.

Redial the call When bluetooth connected, double press redial the last call

Play the music stored in the mobile phone
This product supports A2DP function which can play the music stored in the mobile phone by transmit music to the car audio through the bluetooth hands- free FM so as to restore the higher quality music effect.

Mobile Music / TF / U Disk Song Mode
Long press“ ”to enter mode switch: BT– –USB– –TF
After connecting the bluetooth of the mobile phone, select the song to play or insert TF/U disk to automatically read and play music.

Siri Voice Assistant
When Bluetooth is connected, Long Press “ ” for 3 seconds to activate siri/ voice assistant.( Phone which support this function: APPLE,Samsung and phone with android systerm ) Note: Some phones do not support this function.

Switch function:
Press and hold the “M” button for two seconds to shutdown; short press any button to boot
Tip: Turn off the digital screen, bluetooth, and the button light only. Reserved charging function.

Tech Specs

12V/1.5A

USB2| 5V/2.4A
bluetooth Ver| Version 5.0
bluetooth audio processing| DSP and A2DP(Advance Audio Distribution

Profile)

bluetooth transmission distance| <10M
MIC effective distance| 0.5~2M
FM Freq| 87.5~108Mhz
FM transmission mode| Stereo digital PLL lock frequency

Warm tips

1. Do not turn the radio volume too high (usually 18 or below) to avoid the increase of the sound back noise.
2. Although the transmission power of this product is relatively strong, better to skip the Frequency with strong signal in local to get a better sound quality
3. Do not use this product in a dusty and humid environment with extremely high and low temperatures.
4. Do not drop the product to avoid surface damage or breakdown.
5. Do not disassemble the product,if you have any questions, please contact your dealer.
6. If the absorbent cotton is not firmly fixed, the product can be removed. Wipe the dust on the surface of the absorbent cotton with a non-woven fabric.
7. Due to continuous improvement and enhancement of technology, changes in product performance and functionality are subject to change without notice.

Troubleshooting

Power is not responding or not displayed| 1.  Check if the machine is in good contact with the cigarette port, and the cigarette holder is not seriously rusted.

2.  Unplug and re-try again

3.  Check if the cigarette holder is powered normally

---|---
Can’t play| 1.  Check if the USB device is connected to the player or not, or you can try another USB device.

2.  Please make sure that there is copy of the file in the USB device that can be supported by the product.

3.  Please make sure the volume is not set to 0

There is noise but no sound| 1.  Whether the product player is in a pause state

2.  Is the volume adjusted to 0 or small?

The audio of car can’t receive sound| 1.  Make sure that the product FM launch has been turned on.

2.  Is the transmission frequency of the product the same as the reception frequency of car’s?

The launching effect is not good, there is noise| 1. Make sure that there is no strong signal station at the frequency of the current transmission. When using it, adjust to the frequency of no radio station to get better sound effect.

Packaging

1. Main device
2. User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>