AXE 53371 Outdoor Indoor TWS Wireless Speaker User Manual

: June 6, 2024
: AXE

Table of Contents

Outdoor / Indoor
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Outdoor / Indoor

TWS Wireless Speaker 53371

MANUAL FOR WIRELESS SPEAKER
Please read this manual carefully before using your new AXE Wireless Speaker

Upto 5 Hours Playing Time

FEATURES

2. 0CH portable Bluetooth waterproof speaker
Water resistant IPX5, splash-proof, rainproof, perfect for beach, poolside, boat and other outdoor activities.
Dedicated button for TWS function, achieve true wireless Bluetooth playing with double enhanced stereo sound.
With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such as your mobile phone, notebook, iPhone or iPad.
Bluetooth operating range 10 meters.
With USB and Micro SD card supporting.
With FM radio.
With Line- in function, suitable for PC, MID, lV and other audio devices.
Built- in lithium rechargeable battery 3000mAh.
With handle, easy to take out.

ACCESSORIES

Charging cable, Audio cable, User manual

SPECIFICATION

Bluetooth version: 5. 0
Speaker size: 3 inch•2
Horn output: 20W-2
Battery capacity: 7.4V, 3000mAh Frequency response: 1 OOHz-16kHz
Playtime at max volume: 3H

PRODUCT DETAILS

Micro SD Slot
USB Port
AUX Input
Battery Indicator
Backward / Volume Down
Forward / Volume Up
Play/Pause
Mode (Switch Bluetooth, USB Disk, Micro SD, FM and AUX-IN)
TWS Button
Power On/Off

Bluetooth

Turn the power button to “ON”, The Power button will turn blue and twinkle quickly, then enter Bluetooth mode and make a tone “Bluetooth Device Is Ready To Pair”.
Activate Bluetooth of mobile phone and search for device name “AXE” then connect it. The power button will stop twinkling and make a tone “Bluetooth Device Connected Successfully” once connected.
Play the music from your mobile phone and enjoy.
Short press Forward or Backward button on the device or on Mobile phone to select songs you like.
Press Play/Pause button on the device or on Mobile phones to play/pause the music.
Long press Forward or Backward button to adjust volume up and down. Or adjust the mobile phones volume.

Playing music from USB disk & Micro SD card

Turn the Power button to “ON”.
Insert Micro SD card or USB flash disk into slot, the speaker will make a tone “Music Play Mode” and play the stored music automatically.
Under playing mode, short press Forward or Backward button to select songs you like, long press to ad1ust the volume up and down.
Press Play/Pause to play or pause.

Note: Under Bluetooth playing mode, insert Micro SD or USB will disconnect the Bluetooth and switch to play the USB or Micro SD card. You can press the MODE button to switch to Bluetooth mode again.

FM Radio

Under FM radio mode, the audio cable provided is treated as an antenna. Please Insert the audio cable to get best FM signal before using.
Turn the power button to “ON”, press the “MODE” button, the speaker will prompt “The Radio Mode” when entering FM mode.
Under playing mode, short press “Play/Pause” button to auto search the FM Channel and store it automatically.
Short press Forward or Backward button to change the stored FM channel.

AUX-In

For other compatible music devices or your MP3/MP4 players, use the supplied audio cable to connect from the device’s “Line Out” to the “Aux-In” of this device, the speaker will prompt “Aux Input Mode”, then Enjoy .. When using an external device, all functions can be controlled by the external device.

Note

When Bluetooth connection 1Mth your mobile phone, there ‘MIi be a battery icon indicating the speaker battery volume on your phone.
Press the MODE button to switch the different modes, the order is Bluetooth, USB disk, Micro SD, FM radio and AUX-IN.
When the speaker Bluetooth connected with one mobile device, user can long press the TWS button to disconnect the previous device, then make Bluetooth connection with another mobile device;
Default volume is at 50% status of max volume;
Long press Mode button to turn the RGB lights on/off;
When battery voltage low, the speaker will prompt “Battery Is Low, Please Recharge In l7me”;
Turn the power button to “off” while without use.

TWS Function

Tum on two identical speakers you want to pair, please note they must be the same BT paring name, both under BT mode. Only need to set one of the two units.
Press the “TWS” button, speaker will make a tone “di” to start to pair, it will make “di” 3 times and TWS button will keep lighting after paired successfully.
Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effect.
When you want to exit the TWS mode, press “TWS” button (of the unit you set at the beginning) again to exit the TWS function.

Charging the AXE Speaker

The charger is not included in the accessories. Please use the Universal 5V/1A charger to charge this device, and we are not responsible for any damage caused by using other chargers.
Power off the unit, put the provided charge cable into the charge slot of unit, connect the other end to PC or other charger with 5V output.
Charge time should be 4-6 hours. The light is red while charging, and the indicator light will switch off when fully charged.
(When playing music during charging, please put the volume to middle, because for some music with heavy bass, the charger may not be able to afford the high current temporarily under the maximum volume.)
In order to prolong the life of battery, please do not charge more than 8 hours.

IC Statement

This device complies v,;th Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

This de,;ce may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device

The term “IC: ” before the certification/registration number only signifies that the Industry Canada technical specifications were met This product meets the applicable Industry Canada technical specifications.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the reserving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to wich the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.