innova SW-R9FT Sport Watch Spherical Full Touch User Manual

: June 6, 2024
: InnOVA

Table of Contents

Equipment requirements
Function introduction
Main function description
Handle brief operation touch function
Bluetooth connection Da Fit download
- Bluetooth connection by APP
- Bluetooth auto reconnection: –
Other functions
- Unbinding the device
Precautions
- Declaration of conformity
Guarantee
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**innova SW-R9FT Sport Watch Spherical Full Touch User Manual

**

Equipment requirements

**IOS.0 or above

**

Android4.4 or higher

Bluetooth 4.0

App – QR Code

iOS
Android

Function introduction

1.1 Time interface

Icon 1-1

1.2 main interface

Icon 1-2

1.3 exercise

Icon 1-3

1.4 Heart rate measurement

Icon 1-4

1.5 blood pressure measurement

Icon 1-5

1.6 Blood oxygen measurement

Icon 1-6

1.7 notification

Icon 1-7

1.8 the weather

Icon 1-8

1.9 Photo control

Icon 1-9

2.0 Music Control

Icon 2-0

2.1 Stopwatch

Icon 2-1

2.2 Setting

Icon 2-2

2.3 Shut down

Icon 2-3

Main function description

Pedometer
Sport Management
Remote camera
Message push
Call reminder
Data synchronization
Sleep Monitoring
Heart Rate
Blood Pressure
Weather forecast
Calories
Sedentary reminder

Chip: NRF52832 + Touch IC
Bluetooth: 4.0
Screen size: 1.22 inches
Screen pixels: 240*240
Compatible system: Android4.4 or above, ios 8.0 or above
Standby time: 15 days for regular standby, 5-7 days for use

Handle brief operation touch function

Touch Function

Full screen touch

Select different main page in the APP dial, the main page can edit the picture.

Charging

Charge the charger with the main unit.
When the bracelet is charging, the battery level icon will be displayed. The battery symbol on the screen is full when the battery is full

Health data

The ring is turned on to the exercise interface, enters the exercise mode, and is divided into walking, running, cycling, mountain climbing, football, basketball, and badminton mode; health interface, touch key to enter heart rate, blood pressure, blood oxygen mode, in heart rate mode Contact with the skin, the bracelet flashes and the heart rate detection is turned on. In the blood pressure mode, the bracelet light is long, the blood pressure test is long, and the ring light is long; after the Bluetooth connection is succes- sful, the wristband end step/sleep/heart rate data is successful. It will automatically sync to the mobile phone in real time.

Bluetooth connection Da Fit download

Download through the application market: Android: application treasure, pea pod and other application market search Da Fit to download IOS side: App Store search Da Fit to download

Download by QR code:

iOS
Android

Installation complete icon as shown

Log in

Open Da Fit, as shown below
Log In Instruction

Bluetooth connection by APP

After the bracelet is turned on, Bluetooth is always searched. Go to the Da Fit page, click More Options, click Connect Device, click Search, select the name of the device you want to connect to, and click Connect to connect successfully.
After the Bluetooth connection is successful, the time of the bracelet is synchronized with the time of the mobile phone. The APK clicks to find the bracelet, and the bracelet vibrates and displays the prompt icon.

Bluetooth auto reconnection: –

There is no reminder beyond the Bluetooth connection range. When the bracelet reaches the Bluetooth connection range, the APK will be automatically reconnected when the Bluetooth is connected.

Other functions

The following functions can be implemented only after successfully logging in to the apk and the Bluetooth connection is successful.

Notice

Including call notification, SMS notification, mes-sage notification, WeChat message notification (Example: Turn on call notification in the setting, when the mobile phone receives an incoming call, the wristband vibrates and the screen prompts, the interface will display the caller icon, click the touch button Stop reminding).

Do not disturb mode

When the Do Not Disturb mode is turned on, all notification notifications that are turned on in the setting except the alarm clock will no longer have an automatic bright screen vibration reminder on the wristband end.

Alarm reminder

The APK side clicks the alarm reminder setting to add the alarm time. When the alarm time arrives, the bracelet end vibrates and the screen prompts and displays the alarm icon.

Reminder mode

Vibration: When the mobile phone APK sets the push message, only the vibration reminder appears on the wrist end;
Bright screen + vibration: When the mobile pho-ne APK side sets the alarm time to arrive or rece-ives the push message, the wrist ring displays bright screen + vibration reminder;

Gesture Intelligence

Select the wearing method (left hand / right hand) and wear the bracelet on the selected hand (left hand / right hand); – Raise the hand to brighten the screen: Turn on the hand to brighten the screen, raise the hand so that the bracelet is tilted inward toward the front of the hand, and the wristband end displays a bright screen; – Turning the wrist screen: Turn on the wrist and brighten the screen. The 90 degree flip makes the wristband tilt inward toward the front of the wrist, and the wristband displays a bright screen.

Unbinding the device

Open Da Fit, in the “More” interface, click “Con-nect Device” will pop up “Current Device” “Dis-connected from Current Device”, click, it will appear whether to disconnect Bluetooth, select “OK” to unbind.

Precautions

Android4.4 or iOS 8.0 and above devices that support Bluetooth 4.0;
When using for the first time, please connect the charger to activate the bracelet;
Bluetooth connection: A Please make sure that the Bluetooth of the mo-bile phone is turned on and the wristband is tur-ned on. B When searching for Bluetooth, please make sure that the bracelet is not bound by other accounts; When C searches for Bluetooth, the bracelet and the mobile phone are as close as possible.
If the hand ring does not receive the push me-ssage, please confirm that Dafit is running in the background, and the message notification is on.
If the exercise, sleep, and heart rate data are not synced to the APK, try disconnecting the Bluetooth and reconnecting.
Before binding the bracelet to another account, you need to unbind it with the current account.
If the bracelet cannot be illuminated, connect the bracelet to the charger.
Long press the dial to enter version information The product instruction manual contains product functions, usage methods and operation procedures. Please read carefully to achieve the best results and prevent unnecessary damage. Please do not arbitrarily change the accessories of the product and disassemble it yourself, resulting in out of warranty. The box contains 1 smart wrist watch, 1 charger, and 1 product manual.

Declaration of conformity

Through this INNOVA CELLULAR, it declares that the SMART WATCH SPHERICAL FULL TOUCH SW/R9FT (CF68) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/30/ UE and RoHS 2011/65/EU, of the European Parliament and of the Council, transposed to Spanish legislation through Royal Decree 188/2016, of May 6, 2016. To see the complete declaration of conformity, you can access it through the following link:

http://www.innovacelular.com/images/web/descargas/descargas/declaracion /declaracion_sw-r9ft.pdf