KOAMTAC 908590 KDC270 Finger Trigger Glove Instruction Manual
- June 6, 2024
- KOAMTAC
Table of Contents
KOAMTAC 908590 KDC270 Finger Trigger Glove Instruction Manual
What’s in the box?
- 1 KDC Finger Trigger Glove
Additional KDC270 Accessories
- Charging Cradle
- Protective Boot
- Ring Scanner
Installation Instructions
-
Open bottom flap and pull adaptor out of pocket being careful not to strain attached cable. (A,B)
-
Insert KDC270 into pocket and connect adaptor to bottom of scanner. (C,D)
-
Slide the KDC270, with adaptor attached, all the
way into the pocket and close flap. (E,F)
Removal Instructions
-
Open flap and remove KDC270 half-way; any further may cause damage to the cable. (G,H)
-
Disconnect the adaptor from KDC270 one side at a time. Do not pull from both sides. (I,J)
Return adaptor to pocket and close flap for storage
Contact Us
116 Village Blvd, ste 305, Princeeton, NJ 02540
+1609-256-4700
+1 609-228- 4373
info@koamtac.com
www.koamtac.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>