INTEX Baby Float Swim Tube Instructions

June 13, 2024
INTEX

INTEX-LOGO

INTEX Baby Float Swim Tube

INTEX-Baby-Float-Swim-Tube-PRODUCT

Product Information:

  • Product Name: 6-12 Months Baby Float
  • Model Number: 222
  • Dimensions: 4.875 X 7.5 inches
  • Date of Manufacture: 08/21/2019
  • Weight Limit: 11 kg
  • Compliance: EN 13138-3 : 2014
  • Not an aquatic toy

Product Usage Instructions:

  1. Inflating and Fitting:
    • Inflate each section by mouth while squeezing the valve lightly at its base. It is important to follow the numerical sequence to ensure proper inflation.
    • Insert the stopper into the valve and recess the valve by pushing down firmly on it.
    • Never overinflate or use high-pressure air to inflate.
    • With the swim seat facing up, position the child’s legs through the bottom front leg holes.
    • The child’s body should be approximately upright.
    • Ensure that the swim seat fits securely around the child’s lower body and that the water level is at or about the level of the nipples.
  2. Removing and Deflating:
    • Lift the child out of the swim seat.
    • Pull the stopper out and squeeze the valve at its base to deflate.
    • Rinse the swim seat with water and air dry thoroughly before storing it in a safe storage area.

Warning:

  • This product will not protect against drowning.
  • Always fully inflate all air chambers before use.
  • Use the baby float only under constant supervision and within direct reach.
  • Do not allow the child to wear diapers or any other apparel or device that may cause entrapment inside the seat.
  • Always supervise the child within direct reach.
  • The child should have the capability to sit upright as a starting point to use the swim seat.
  • Do not allow children to bite or chew the product, as pieces that may come off can pose a choking hazard.
  • Do not use the product if the child’s weight exceeds 11 kg.

Please refer to the provided instructions in the user manual for additional languages.
Save these instructions for future reference.

BABY FLOAT INSTRUCTIONS

HOW TO INFLATE AND FIT

  1. Inflate each section by mouth while squeezing the valve lightly at its base. Note: It is very important to follow the numerical sequence; failure to do so will result in an improperly inflated baby float. Insert the stopper into the valve and recess the valve by pushing down firmly on it. Never over inflate or use high pressure air to inflate.
  2. With the swim seat facing UP, position the child’s legs through the bottom front legs holes of the swim seat.
    Child’s body should be approximately upright. Be sure the swim seat fits around the child’s lower body securely, and the water level is at or about the level of the nipples.

HOW TO REMOVE AND DEFLATE

  1. Lift child out of the swim seat.
  2. Pull stopper out and squeeze the valve at its base until deflated.
  3. Rinse with water and air dry thoroughly before storing it. Place it in a safe storage area.

WARNING – RISK OF CAPSIZING

  1. WILL NOT PROTECT AGAINST DROWNING.
  2. ALWAYS FULLY INFLATE ALL AIR CHAMBERS.
  3. USE ONLY UNDER CONSTANT SUPERVISION IN DIRECT REACH OF THE SWIM SEAT.
  4. THE USE OF DIAPERS OR ANY OTHER APPAREL OR DEVICE SHALL NOT LEAD TO AN ENTRAPMENT OF THE CHILD INSIDE THE SEAT.
  5. ALWAYS SUPERVISE IN DIRECT REACH OF THE CHILD.
  6. CAPABILITY TO SIT UPRIGHT AS STARTING POINT TO USE SWIM SEATS.
  7. DO NOT ALLOW CHILDREN TO BITE OR CHEW THE PRODUCT AS PIECES THAT MAY BE BITTEN OFF/TORN FROM/COME AWAY FROM THE MATERIAL MAY CAUSE A CHOKING HAZARD.
  8. DO NOT USE:
    • By user beyond or below designated weight range/age;
    • within child’s standing depth;
    • in breaking waves;
    • in bath tubs.

Mass : 11 kg, (for orientation only: this mass corresponds to an age group of 6-12 months). Not an aquatic toy.
EN 13138-3 : 2014

6-12 MONTHS BABY FLOAT FOR EE ITEMS 4.875” X 7.5”

INTEX-Baby-Float-Swim-Tube-1

Guidance – Approximate body weight: age group

INTEX-Baby-Float-Swim-Tube-2

Manufacturer

©2019 Intex Marketing Ltd. – Intex Development Co. Ltd. – Intex Recreation Corp. All rights reserved/Tous droits réservés/ Todos los derechos reservados/Alle Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

www.intexcorp.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

INTEX User Manuals

Related Manuals