TOPDON Volcano2000 Portable Lithium-ion Jump Starter User Guide

TOPDON Volcano2000 Portable Lithium-ion Jump Starter User Guide

Welcome

Thank you for purchasing TOPDON Jump Starter Volcano2000. Please patiently read and understand this User Manual before operating this product. If any issues arise from the operation of this product, welcome to contact support@topdon.com for official technical support.

About

TOPDON Volcano2000 serves as a portable Jump Starter for cars, boats, motorcycles, ATVs, lawn mowers, caravans, tractors, trucks, etc., with 25-times boost capability on a single charge, and multiple protections against short circuits, overloads, and overcharging etc., for optimal user experience.

The Jump Starter can also be used in a variety of real-life applications for night illumination, outdoor activities, motoring life, and natural disaster emergency etc. with the added features as wireless charging, Type-C outputs, to be the intimate guardian in your journey.

Features

Package Contents

1. Lithium Jump Starter
2. Smart Battery Clamp
3. Type-C Cable
4. DC to Cigarette Lighter Converter
5. User Manual
6. Carrying Bag

Compatibility

The product is only compatible with the 12-volt lead-acid batteries, including 12v cars, trucks, pickups, motorcycles, boats, mowers, ATVs, tractors, caravans, etc. Do not use this product with any other type of batteries.

Specifications

Peak Current: 2000A
Type-C: in/out 5V/3A
Output 1: QC3.0 5V /3A, 9V /2A
Output 2: USB2.0 5V /2.1 A
DC Output: 12V/1 0A
Wireless charge:1 OW
Short Circuit Protection: Effective
Reverse Protection: Effective
The Operation Temperature: -20°C~ 70°C (-4 °F ~ 158 °F )
Over Discharge Protection: l 3V+/-0.5V
Dimensions: 20695.542 mm (8.11 3.761.65 inches)
Weight 1.35kg (2.98Ib)

How To Use

Jump Start Your Vehicle Battery.

1. 1. Connect the smart battery clamp cable to the jump starter, the LED Indicator will flash alternately green and red indicating it is ready to use;
2. Connect the red clamp to the positive terminal (POS, P. +) of the battery; and connect the black clamp to the negative terminal (NEG, N,-) of the battery;
3. Start the vehicle;
4. When your vehicle is started, disconnect the clamps from the vehicle battery.

Attention:

Charging the external electronic devices:

1. 1. Press the “Power” button;
2. Use the USB cable to charge mobile devices as cell phones, tablets etc.; Use the 12V DC output to power appliances as air-compressors, vehicle refrigerators;

Use the LED Light as Flashlight or SOS, strobe:

1.  Hold the “Power” button for 3 second to turn on LED Light;
2. Press the “Power” button to cycle the LED modes, from Steady Light, to “SOS”, and to Strobe.

Battery Charging

• Charge this product via the USB type-C input from the wall socket or other 5V-8V output devices.
• When this product is being charged, its LCD will display “Charging” message. When it’s fully charged, the LCD will display a “l 00%” message.
• Please charge this product for at least 8 hours before the first use.

Important

• The battery jump procedure is only for use on vehicles with 12 volt batteries.
• Use only the smart battery clamps supplied with this product.
• Only jump start the vehicle when capacity is at least 50%.
• Better not get the two battery clamps contacted together.
• If the engine does not start, disconnect this product from the vehicle battery, and wait for at least 20 seconds before reconnecting. Maximum three attempts are allowed in 2 minutes.
• Once the vehicle engine is successfully started, disconnect the clamps within 30 seconds.
• DO NOT use this product if any cable, clamp or cord is damaged.
• DO NOT put the product under the direct sunlight or hot areas.
• DO NOT disassemble the equipment.
• DO NOT use chemicals or detergents to clean the product.
• DO NOT place the products in high temperature environment for a long time.
• Check the charge level of the device every four months, and charge the device if needed.

Troubleshooting Guide

Q: How to turn off this product?
A: This product will automatically power off while not being used.

Q: How long time does it need to get fully charged?
A: Via the Type-C USB input, the device will need approximately four to five hours to get fully charged.

Q: How many times can this product jump start a vehicle battery on a single charge?
A: About 25 times.

Warranty

• TOPDON One Years Limited Warranty The TOPDON Company warrants to its original purchaser that TOPDON products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period). For the defects reported during the Warranty Period, TOPDON will, according to its technical support analysis and confirmation, either repair or replace the defective part or product.
• This limited warranty is void under the following conditions:
  Misused, disassembled, altered or repaired by a non-TOPDON technical repair specialist. Careless handling and violation of operation.

If you have any questions or doubts, please contact us via

Hotline 833-629-4832
Email support@topdon.com
Website www.topdon.com
Facebook @TopdonOfficial
Twitter @TopdonOfficial
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>