KENT PRIDE PLUS Mineral RO Water Purifier Instruction Manual

KENT PRIDE PLUS Mineral RO Water Purifier Instruction Manual

Welcome to KENT

Dear Customer,

At the outset, allow us to thank you for your trust in KENT water purifier. We take pride in our reputation for product quality and industry proven performance. We are certain that your decision to own KENT Pride Plus Mineral RO™Water Purifier will go a long way towards keeping you and your family in good health. We are confident that you will be satisfied with its performance and that it will serve your need for safer and cleaner drinking water without any compromise.

This guide will help you in getting the best out of your water purifier. Please go through this booklet to familiarize yourself with its operation and maintenance. You can look forward to years of trouble free service. To ensure that the warranty of your water purifier is effective, it is important that you fill up the enclosed warranty card and mail us the installation report within 15 days of purchase. In case you need any further information, contact your nearest KENT dealer or branch.
Best Wishes,

KENT RO SYSTEMS LTD

KENT TECHNOLOGY – A Breakthrough in Water Purification

Presenting KENT Pride Plus Mineral ROT” Water Purifier; it uses futuristic and state-of-the-art technology to provide purer and healthier drinking water.

At the heart of KENT Pride Plus Mineral ROT” Water Purifier is a Reverse Osmosis membrane with capillaries as small as 0.0001 microns that reduce even dissolved impurities (salts and heavy metals) and even converts hard water to sweet and purer drinking water. The KENT Pride Plus Mineral ROI” Water Purifier also allows the user to control the Total Dissolved Solids (TDS) level of purified water.

Salient Features of KENT Pride Plus Mineral RO Water Purifier

• Water purifier with UV disinfection in tank for absolute purification
• Wall-mountable KENT Technology water purifier
• Purification by RO + OF + TDS Control + UV in tank makes water 100% pure
• Inbuilt TDS Controller that allows adjustment of TDS level of purified water
• Suitable for purification of brackish/ tap water/ municipal corporation water supply
• 8L storage tank with water level indicator Plus Mineral ROTM Water Purifier
• Fully automatic operation, with auto-on/ off function
• RO Membrane fused inside membrane housing to prevent tampering
• Vertically mounted SMPS for protection from water
• Use of push-fit fittings for leakage and maintenance free performance
• Compact design, takes less space for installation
• ABS construction for corrosion free use

Items In The Box

1. KENT Pride Plus Mineral ROTm Water Purifier: 01 No
2. 3-Way Connector: 01 No.
3. S.S. Ball Valve: 01 No.
4. Food Grade Pipe”/ inch (Blue): 2.5 m
5. Food Grade Pipe% inch (White): 2.5 m
6. Screws & Plastic Insert: 02 No. each
7. Instruction Manual: 01 No.
8. Sticker Center Drill: 01 No.

Important Instruction

Avoid exposure to direct sunlight and installation in damp areas
| Make sure that the temperature of the water entering the purifier is within 10 C – 40 C

---|---
Make sure that the reject, water pipe is not placed at a level higher than the system, otherwise the rejected water may flow backwards into the purifier.
| Maximum distance between the water source and the purifier should not be more than 3 meters

Avoid sharp bends in the pipe fittings. Do not bend or block the reject water pipe
| Do not confine the purifier in a cabinet

In case of not using the purifier for more than two days, kindly switch off the power supply and drain the storage tank.
| To keep the storage tank clean, it should be drained once in 15 days.

Use Genuine KENT spares for optimum performances.
| Do not try to service the purifier on your own. Instead call a technician for help

Reverse Osmosis Process

The Reverse Osmosis process , also known a s hyper filtration, is the finest filtration process known till date. The process ensures reduction of particles as small as ions from a solution. Reverse Osmosis uses a semipermeable membrane to reduce salts from potable/ brackish water. In Reverse Osmosis, water pressure applied to the concentrated side forces the process of osmosis into reverse. Under enough pressure, treated water is “squeezed” through the membrane from the concentrated side to the diluted side. Salts dissolved in water as charged ions are repelled by the RO membrane. The rejected impurities on the concentrated side of the membrane are washed away in a stream of waste water and thus do not get accumulated, as in a traditional filter.

UV Process

The UV light has shorter wavelength (higher energy) than the visible light. It is called ultraviolet because it is just beyond the violet light in the light spectrum. Technically, the ultra-violet light is defined to be any wavelength of light, which is shorter than 400 nanometer.

UV rays, which penetrate into the micro-organisms, are absorbed by the DNA of \the pathogen in the water. The DNA is altered in such a way that the pathogen cannot reproduce itself. Thus, it is essentially killed and cannot cause infection. This  process of DNA modification is called inactivation.

Note: The purified water stored in tank is disinfected using LED UV, which automatically switches on for 30 minutes in a two hour cycle.

Water Flow Diagram

S.NO.

|

SPARE PART CODE

|

ITEM DESCRIPTION

---|---|---
1| 20035| LOW PRESSURE SWITCH
2| 20010| SEDIMENT FILTER
3| 20028| SOLENOID VALVE
4| 20005| BOOSTER PUMP
5| 20009| ACTIVATED CARBON FILTER
6| 20003| OF FILTER
7| 20034| TDS CONTROL VALVE
8| 20002| RO MEMBRANE
9| 20018| FLOW RESTRICTOR TUBE
10| 20621| UV LED
11| 20015| POST CARBON FILTER
12| 20058| NON RETURN VALVE
13| 20148| WATER STORAGE TANK
14| 20029| FLOAT MICRO SWITCH

Electrical Circuit Diagram

UV LED Failure Alarm

KENT Pride Plus Mineral RC r Water Purifier has an in-built feature that sounds an auale alarm if the UV LED failure. This alarm will sound as follows:

Installation Instructions

The KENT Pride Plus Mineral ROT!” Water Purifier is a product of advanced technology which ensures safe and clean drinking water. The purifier is easy and convenient to install.

Recommended Site Preparations:

• Single Phase 100-250V AC, 50-60 Hz. connection not more than 3m away from the point of installation of purifier
• Raw water supply with % inch nipple not more than 3m away
• Drain for rejected water not more than 3m away
• Space as per dimensions of the purifier
• Wall/plane surface for mounting two screws and holding the machine
• The system and installation must comply with state and local laws and regulations

Specific Instructions:

• KENT Pride Plus Mineral ROTm Water Purifier is a wall mountable purifier. Make sure that it is only mounted on a wall. Avoid installation on wooden and metallic stands
• For optimum performance and minimum inlet pressure required, ensure that the raw water supply tank is at least 10 ft above the level at which the purifier is installed
• It is preferable to install the purifier near a sink so that inlet and reject water lines are easily available

Installation Procedure

Wall Hanging Diagram

Step 1:

1. Paste the central drill sticker on wall at (3.6 Feet to 4.0 Feet from the ground) as per your convenience.
2. Ensure that the sticker is pasted straight on the wall, then drill holes as per the space provided on sticker.
3. Now, insert the puff up with the help of a hammer.
4. Screw in two 10X50 self-taping screws, 5.4 inches (138 mm) apart horizontally.
5. Carefully hang the purifier on the wall with the help of the wall-mounting slot holes provided on the back side of the purifier.

Note:

1. If the wall is not straight or the screws are not properly drilled in an even position, it will damage your purifier.
2. Keep the device away from heat or direct sunlight.

Step 2

1. First fix the SS ball valve (marked as no. 4)to the 1/4 inch port of the 3-way connecter (marked as no. 2) as shown in figure 2.
2. Connect the 3-way connector to the raw water supply (marked as no. 1 )as shown in the figure 3. The 3- way connector is fitted in line with the raw water supply.
3. The other end of the 3-way connector can be connected to a tap (marked as no.3) as shown in figure 4. or can be plugged off if not required.

Step-3

1. Now connect one end of the white pipe to SS ball valve and another end to the upper push-fit elbow fitting to the left hand side of the purifier labelled as WATER IN, as shown in fig 1.
2. Similarly, connect one end of the white pipe to the lower elbow fitting connector in tank labelled as REJECT WATER and leave the other end in the drain, as shown in fig 2.
   

Step-4

Before connecting the power supply, it is important that you perform the following functions:

1. Open the SS ball valve (handle parallel to the ball valve) to start the flow of water into the purifier, as shown in the figure.
   

2. Wait for 2-3 minutes to ensure that the filters are soaked in water.

Step-5

1. Connect the power supply.
2. Installation is complete.

TDS Adjustment

A unique feature in KENT Pride Plus Mineral ROT” Water Purifier is the TDS control valve, which is not available in any other domestic water purifier till date. This feature allows the user to control the content of natural minerals (TDS) in purified water.

To increase the TDS level, the user can turn the screw of the valve anticlockwise; it will result in more mineral content in treated water. To reduce the TDS level, user can turn the screw valve clockwise, it will result in less mineral content in treated water. We recommend the TDS of the purifier to be kept at lowest but not below 50 mg/I.

Starting up the Purifier

• Switch on the power supply
• Wait till the storage tank fully fills up”
• Switch off the power supply
• Drain the storage tank by opening the drain plug present at the bottom of the storage tank so as to remove any dust particles present in the pipes and storage tank
• Close the drain plug & switch on the power supply
• The purifier is ready to use

Recommended Uses of Rejected Water

Although the rejected water has high concentration of salts, it is absolutely clean and free from impurities like chlorine, dirt, sand, etc. This rejected water usually goes down the drain but can be used for cleaning utensils & mopping the floor.

We recommend KENT RO Reject Water Storage Tank can be purchased separately to store & use RO reject water.

Maintenance

To ensure that the purifier operates at its optimum level, routine maintenance must be performed. The frequency of the maintenance will greatly depend upon the raw water quality and consumption of treated water.

• The storage tank must be drained once in 2 Product Generic Name Colour Applications Water Purifier White Suitable for Purification of Brackish/Tap Water/ weeks. To do so, switch off the power supply, open the drain plug at the bottom of the tank & allow the water to drain. Then screw back the plug and switch on the power supply
• Replace sediment, activated carbon & post carbon when the filter change alarm is audible OR after every 12 months. It is recommended to  to Product Code Technical Specifications 11067 performed. The frequency of the maintenance will change the FRT when the  filters are replaced
• Replace the RO membrane once in a year consumption of treated water.
• Replace the UV Lamp once in a year
• If you are not going to use the purifier for a long time ( in case you are on a holiday, tour or out of home), make sure that you disconnect the power supply, turn off the raw water supply and drain the storage tank

The reverse osmosis system contains a replaceable treatment component critical for the effective reduction of total dissolved solids and that product water shall be tested periodically to verify that the system is performing properly

Replacement of spare parts are as under:-

• 20010 SP Inline Sediment Filter 8″
• 20009 SP Inline Carbon Filter 8″
• 20002 SP RO Membrane Welded 8″ Housing
• 20015 SP Post Carbon Filter (Blue)
• 20003 SP Hollow Fibre Membrane (RO)
• 20018 SP FRT 550/600

Note: Filters and membrane are consumables. Their replacement time is dependent on the quality of raw water and water consumption. They are not covered under the warranty. However, if a filter chokes within six months and a membrane within a year, it will be cleaned/repaired/replaced free of cost. Changing the filters and system inspection is available on call. The treatment capacity of the RO membrane will reduce with time due to clogging of pores of membranes.

“This reverse osmosis system contains a replaceable component critical to the efficiency of the system. Dimensions (mm) Inlet Water Pressure/Temp. (Min.) Inlet Water Pressure/Temp. (Max.) Min./Max. Operating pH Filter Cartridge UV LED Wattage Net Weight Storage Capacity Maximum Duty Cycle Membrane Type UF Membrane Booster Pump Voltage Total Power Consumption Input Power Supply IP Rating 380 (L) x 270 (W) x 505 (H) 0.3 kg/cm/10°C 4 kg/cm/40°C 6.5-8.0 Sediment, Activated Carbon, UF and Post Carbon. 0.7 W 7.45 kg 8 L 75 L/day Thin Film Composite RO 0.1-0.01 Microns 24 V DC 60 W Single Phase 100-250V AC, 50-60 Hz. @ IPX1 Replacement of the reverse osmosis component should be with one of identical specifications as defined by the manufacturer, to ensure the same efficiency and contaminant reduction performance.

Note: Incase of UV LED failure the machine sounds an alarm with two beeps Contact Kent Service to replace the UV LED.”

Important Safety Instructions

1. If the supply cord is damaged, it must be replaced by the original part in  order to avoid hazard.
2. Children should be supervised to ensure that they do not play with the appliance.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety

Technical Specifications

Corporation Water.
Purification Production Rate| 15 L/hr.”
Body Material| ABS Food Grade Plastic
Mounting| Wall-mounting
Dimensions (mm)| 380 (L) x 270 (W) x 505 (H)
Inlet Water Pressure/Temp. (Min.)| 0.3 kg/cm/10°C
Inlet Water Pressure/Temp. (Max.)| 4 kg/cm/40°C
Min./Max. Operating pH| 6.5-8.0
Filter Cartridge| Sediment, Activated Carbon, UF and Post Carbon.
UV LED Wattage| 0.7 W
Net Weight| 7.45 kg
Storage Capacity| 8 L
Maximum Duty Cycle| 75 L/day
Membrane Type| Thin Film Composite RO
UF Membrane| 0.1-0.01 Microns
Booster Pump Voltage| 24 V DC
Total Power Consumption| 60 W
Input Power Supply| Single Phase 100-250V AC, 50-60 Hz. @
IP Rating| IPX1
Purification capacity tested on Municipal Water/Tap Water having TDS level of 750 ppm at room temperature

Warranty Card

Product: KENT PRIDE PLUS

Product Code: 11067

Serial No. …………………………… Dealer Stamp…………………………….

It is certified that KENT RO Water Purifier purchased as under carries 1 Year Warranty + 3 Years of Free Service’. (Visit/Service charges will not be charged, however parts if replaced shall be charged]

4 Year Warranty

Serial No
Purchase Date .
Installation Date

Service Provider’s Name & Address with Stamp

To avail this scheme of 3 Years of Free Service, customer must download the KENT Service App at the

Note: The purified water stored in tank is disinfected using LED UV, which automatically switches on for 30 minutes in a two hour cycle. time of installation. Also future service request must be raised via KENT Service App to avail free service. Terms & Conditions applicable are mentioned overleaf.

Marketed by: KENT RO SYSTEMS LTD.
E-6, 7 & 8, Sector-59, Noida, U.P.-201309, India. E-mait: service@kent.co.in | Website: www.kent.co.in
Customer Care: 92-789-12345

Terms & Conditions of Warranty

KENT warrants all new products manufactured by it to be free from defects in material and workmanship under normal usage and service from the date of purchase as under:

1. It is essential for the customer to download the KENT Service App either on Android or iOS and the customer should lodge a service request via App only.
2. In case of emergency during the warranty period, the customer may lodge a service request at our Call Centre Ph. 92  -789 -12345.
3.  The warranty period commences from the date of installation by the first end -user. During this warranty period of one year, KENT Purifiers or its Authorised Service Provider (ASP) will replace or repair any part of KENT Purifiers, that in the opinion of KENT Purifiers or its ASP, would be defective in operation due to faulty material or workmanship (i.e. manufacturing defects) with the exception of consumables such as Sediment Filter, Carbon Filter and RO/UF Membrane. However, if the RO/UF Membrane gets clogged within first one year and/or if the filters get clogged within first six months, they shall be cleaned / repaired I replaced at no extra charge.
4. In addition to this, KENT will also provide free service for a period of next 3 years, wherein Visit/Service charges will not be charged, however parts if replaced shall be charged. Visit/Service charges will not be charged only for customers residing within 25kms of municipal limits, for other areas additional charges shall be applicable.
5. The product’s plastic body is not covered under warranty and hence, it must be handled with care to guard against breakage.
6. The original purchaser of the unit can avail services under warranty at the point of sale, by producing the damaged part(s) a long with the original in voice.
7. This warranty is void if the unit is not operated under normal municipal water or well water conditions or is subjected tothetemperatureabove40°C.
8. Product returned to KENT Purifiers or its ASP for warranty examination must be shipped freight prepaid. KENT Purifiers or its ASP shall not be held liable for claims exceeding the cost of repair of the defects in workmanship.
9. This warranty agreement shall not be interpreted to render KENT Purifiers or its ASP liable for injuries or dam ages of an y kind -direct, consequential or contingent to persons or property.
10. KENT Purifiers or its ASP shall not be held responsible by representative or buyer for failure to abide by any of the obligations of this warranty agreement if such failures are the result of circumstances of Forces Majeures: such as, but not limited to, floods, earthquakes, transportation strikes, labour disputes with outside suppliers or any other conditions beyond the control of KENT Purifiers or its ASP.
11. KENT Purifiers or its ASP shall not be held liable for repair or alterations made without prior written approval; for products clogged by suspended matter, precipitates or biological growth; or for failures resulting from the lack of proper maintenance.
12. KENT Purifiers or its ASP cannot and shall not be held liable for any sickness or illness due to the consumption of drinking water from any water purifier supplied by KENT Purifiers, since KENT Purifiers or its ASP does not have any control over the maintenance and usage of water purifier.
13. This warranty agreement excludes all products/ component parts or damage to any part of this water purifier which, in the opinion of KENT Purifiers or its ASP, have been subjected to misuse; misapplication; negligence; alteration; accident or operation contrary to our instructions, incompatibility with accessories not installed by KENT Purifiers or its ASP, or that have been repaired with component parts other than those manufactured by or obtained from KENT Purifiers or its ASP. Damage caused by freezing, flood, fire or Act of God is not covered by this warranty. In all such cases regular charges will apply. This limited warranty does not include service to diagnose a claimed malfunction in this unit.
14.  KENT Purifiers reserves the right to alter or improve design and specifications at any time, without any contingent obligations to prospective buyers or owners of the products previously sold.
15. Any disagreements and obligations based upon the purchase of KENT Purifiers products and thereby imposed on KENT Purifiers or its ASP shall be governed by and construed according to the laws of INDIA and subject to the jurisdiction of Delhi Courts only.
16. KENT Purifiers or its ASP assumes no warranty liability in connection with this water purifier other than that specified herein. This warranty is in lieu of all other warranties, expressed or implied, including warranties of fitness for a particular purpose. KENT or its ASP does not authorise any person or representative to assume for them any other obligations on the sale of this water purifier.
17. Under no circumstances, the liability of KENT Purifiers or its ASP shall exceed the value of the product.
18. Under no circumstances are the terms mentioned above negotiable and no employee of KENT Purifiers or its ASP has the authority to supersede them. Why is it essential to download the KENT Service Application
19. Customer can lodge a service request/complaint anytime(24×7).
20. The customer can track/monitor the progress of service request/complaint.
21. Complete case history of the services done can be viewed.
22. Regular feedback & offer details on the App.
    
    To download the App scan the QR cod

Installation Report

Product : KENT Pride Plus Water Purifier

Serial No.:

• Customer’s Name
• Customer’s Address:
• Customer’s Ph.:
• TDS of Purified Water:
• Customer’s Signature:
• Invoice No.:
• Invoice Date:
• Installation Date:
• Service Provider’s Name:
• Service Provider’s Address
• Service Provider’s Ph.:
• TDS of Raw Water:
• Service Provider’s Stamp:

By signing on this installation report, the customer hereby agrees to the terms & conditions of warranty mentioned on the back side of the warranty card.

To ,
KENT RO SYSTEMS LTD.
E- 6,7 & 8, Sector-59, Noida,U .P .-201 309, India.
Ph.: 92-789-12345
E- mail: service@kent.co.in
Website: www.kent.co.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>