Portenic T25 GPS RC Drone User Guide

June 6, 2024
Portenic

Portenic logo

Portenic T25 GPS RC Drone

INSTRUCTIONS

  1. Turn on drone, put it on a level surface.

    • The drone will auto-trim on level surface
    • All lights blinking redstep 1
  2. Turn on remote

    • Push up then push down left joystick
    • Pair successfully. Lights flashing blue(back)+white(front)
    • Lights flashing blue(back)+white(front)
      NOTE: You can start to connect WiFi through the state shown in APP Potensic-G, or wait until GPS is calibrated. step 2
  3. Connect APP

    • Turn on WiFi on your mobile, select WiFi named “Potensic-xxx”, then enter the APP interface.
    • Lights flashing blue (back) and white (front). step 3
  4. Initiate GPS Compass Calibration

    • Push the joysticks to 1 & 11 o’clock positions.
    • Lights flashing alternately blue/red(back)+white/red(front)
    • APP shows: “Compass Calibration” step 4
  5. GPS Compass Calibration Part 1

    • Keep the drone level, hold the drone tail and pick up, rotate your body in one full circle (360°) .
    • Back lights will turn to solid blue. step 5
  6. GPS Compass Calibration Part 2

    • Hold the drone bottom, pick up the drone face-down, rotate your body in one full circle(360°) .
    • Front lights will turn to solid white.
    • APP shows: “Compass Calibration okay” step 6
  7. Resume to Default Setting/Calibrate Gyroscope

    • Push the joysticks to 11 & 1 o’clock positions.
    • Lights flashing blue(back)+white(front)
    • APP shows: “Gyroscope is being calibrated”/”Gyroscope okay” . step 7
  8. Finalize GPS Calibration

    • Put the drone back on a level surface.
    • Lights flashing blue(back)+white(front), means the drone is finalizing GPS Calibration.
    • This process may take a few minutes.
    • APP shows: “Waiting for GPS signal” step 8

Once all the lights turn to solid, then you can fly the drone.

  • Solid blue(back)+Solid white(front)
  • APP shows: “Ready to fly”

step 9

NOTICE: Under the environment of weak GPS signal(like indoors), the lights flash blue(back) and white(front); Press the Right Joystick on the remote for 2 seconds to turn off GPS Mode, then you can fly it, but all the GPS functions will shut down, including Position, Follow Me and One key Return function.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals