Wightman UR2-211 Potenza Remote User Guide
- June 6, 2024
- Wightman
Table of Contents
Wightman UR2-211 Potenza Remote User Guide
Potenza Remote
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
- Ensure that your Wightman TV remote control has batteries installed. TIP: Wightman TV remote uses two AA batteries.
- Press the STB button once. TIP: The STB button should light up.
- To set up the Intone Kamari or Amino Amulet 6 Set-Top Boxes, press and hold SETUP and the number 7 until the STB button blinks twice.
- To set up the Amino 140 or 540 Set-Top Boxes, press and hold SETUP and the number 1 until the STB button blinks twice.
- To test the Wightman remote with the Set-Top Box, press guide and channel change.
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
- On your Wightman TV remote control, press TV once; the TV button will blink once. Then press and hold SETUP until the TV button blinks twice.
- Press the numbers 9-9-1.
- The TV button will blink twice.
- Aim the remote control at your TV and press POWER once.
- Press and release the CH+ button once every second until the TV turns off. NOTE: In this search mode, the remote control will send codes from its library to the selected device, starting with the most popular code first.
- Press POWER to turn your TV back on.
- Press SETUP once to lock in the code. The TV button will blink twice to indicate that the code is saved. NOTE: If your TV does not turn on during step 6, repeat step 5 more slowly.
Royal Big Button Remote
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
- Ensure that your Wightman TV remote control has batteries installed. TIP: Wightman TV remote uses two AA batteries.
- To set up the Intone Kamari or Amino Amulet 6 Set-Top Boxes, press and hold SETUP and the Green D button until the CABLE POWER button flashes twice.
- To set up the Amino 140 or 540 Set-Top Boxes, press and hold SETUP and the Yellow A button until the CABLE POWER button flashes twice.
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
- On your Wightman TV remote control, press and hold the SETUP button until it blinks twice.
- Press the TV POWER button.
- Press and hold the OK/SELECT button.
- Let go of the OK/SELECT button when the TV turns off.
Easy Clicker UR2-211 Remote
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
- Ensure that your Wightman TV remote control has batteries installed. TIP: Wightman TV remote uses two AA batteries.
- Press and hold STB and OK/SEL buttons until the STB button lights up solid.
- Point the remote at the Set-Top box.
- To set up the Intone Kamari Set Top Boxes, press the numbers 2-5-8, and make sure the Set-Top Box turns off.
- To set up the Amino 140 or 540 Set-Top Boxes, press the numbers 2-5-6, and make sure the Set-Top Box turns off.
- Press the STB button to store the change.
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
- On your Wightman TV remote control, press the TV and OK/SEL buttons at the same time. The TV button will turn on indicating that it’s ready to be programmed.
- Aim the remote control at the TV.
- Press and release the CH+ button once every second until the TV turns off. NOTE: The remote control will send codes from its library to the selected device, starting with the most popular codes first.
- Press the TV button after your TV has turned off. This will save the code. NOTE: If your TV does not turn on after step 4, repeat steps 1 through 4.
For support and full remote control manufacturer’s guides, visit wightman.ca/support/tv
Technical Support is also available 24/7/365 by calling 1-877-327-4440
MIS_TV_Remote_ALL_Set_Up_20-04
References
Read User Manual Online (PDF format)
Loading......