RIVERSONG SW07 Motive+ Stylish Smartwatch User Manual
- June 6, 2024
- RiverSong
Table of Contents
RIVERSONG SW07 Motive+ Stylish Smartwatch User Manual
Before using this product, please read the instructions carefully.
PRODUCT OVERVIEW
KNOW YOUR PRODUCT
Please follow below mentioned guidelines for better experience:
- Clean your smartwatch regularly, especially the inner side to avoid damage caused by sweat and keep the charging pins dry.
- Adjust the smartwatch tightness to ensure air circulation.
- Avoid usage of excessive skin care product on the smartwatch usage area as it may damage the watch surface.
- Please stop wearing smartwatch in case of any skin allergy or discomfort.
Power-on
Long press side button for 3 seconds to power on your smartwatch or initially
the power may be low, please put it on the charging dock provided in the box
and connect with your charger/laptop/powerbank. (Refer Figure 1, 2)
Figure 1
Figure 2
App download and binding
Scan the below QR code from your smartphone and download the “RS Motive” application or search for the “RS Motive” application on respective Android/iOS store.
Compatible with Android 5.1/iOS 9.0 & above.
Bluetooth 4.0 & above
RS Motive
Verify your MAC address
Tap and hold on the Main interface of your smartwatch to check MAC address. (Refer Figure 3)
Figure 3
At the bottom of this interface it will display the Bluetooth icon if your smartwatch is connected with your device along with battery symbol.
Binding with RS Motive app
- Open RS Motive application and set up user profile. (Refer Figure 4)
- Click on “Add Device” on the next interface. (Refer Figure 5)
- Select your device MAC address from the list of available devices. (Refer Figure 6)
Figure 4
Figure 5
Figure 6
The IOS system will display a Bluetooth pairing request, click on “Pair” tab
to confirm. (Refer Figure 7)
Another approval will be needed to finalize the pairing. (Refer Figure 8)
With the Android system, it will connect it directly.
Successfully bound. (Refer Figure 9)
Figure 7
Figure 8
Figure 9
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
Removal of device
For Android smartphones, device can be disconnected simply by clicking on “Remove Device”. (Refer Figure 10)
For iOS smartphones, click on “Remote Device” from the app. Then unpair it by clicking on the symbol on the right, under Bluetooth settings and “Forget This Device” (Refer Figure 11, 12, 13).
Figure 10
Figure 11
Figure 12
Figure 13
FUNCTION & OPERATION
Main interface
Time and Date will get displayed on the Main interface, Time will automatically get synchronized with your smartwatch once it is successfully paired with your smartphone.
Swipe on the main interface from down to up to switch between menu interfaces. (Refer Figure 14)
Figure 14
Steps interface
Under steps interface you can check steps taken, distance covered & calories burned. (Refer Figure 15)
Figure 15
Messages
Touch on message interface toread messages received on your smartphone. (Refer Figure 16)
Figure 16
Note:
- Latest 3 messages(Messaging/ Whatsapp/Facebook etc.) will get stored in your smartwatch memory.
- To receive message notification on your smartwatch, enable notification function on Motive application
Note: Messages received post successful connection of smartwatch with smartphone will get displayed.
Sleep monitoring
You can check Sleep data on this interface. (Refer Figure 17)
Sleep data will reflect if you are using your watch while sleeping.
Figure 17
Heart rate monitoring
Enter heart rate interface to measure your heart rate, you can also check your heart rate via app. Heart Rate data will get displayed with small vibration alert once heart rate test finishes up. (Refer Figure 18)
Figure 18
WEARING POSITION
In order to get accuracy on heart rate data it is advised to wear it 2cm
inside from your ulna joint. (Refer Figure 19)
Figure 19
Ensure you have worn smartwatch correctly. If it will beloose, the sensor light will get exposed and will cause inaccuracy in data.
Avoid sensor green light contact with your eyes.
Although product is designed to measure heart rate dynamically, it is advised to sit still while measuring heart rate to get better results, else it will take time to measure heart rate and may cause inaccuracy in data.
It is advised to check heart rate data consequently for 5 times and average value of this reading will be considered.
Product is designed to dynamically measure heart rate at real time, heart rate may vary on different conditions, i.e speaking, dining, drinking, walking and so on.
Please make sure heart rate sensor is clean from the bottom and there should not be any dirt particles. Skin color, hair density, tattoo and scar may affect accuracy of measured results, in such cases it is advised to test the heart rate data several times.
Sports
8 different sports modes are available under this tab including Walk, Running, Cycling, Climbing, Soccer, Basketball, Skipping & Badminton. (Refer Figure 20)
Figure 20
Blood pressure
Under blood pressure test interface, the smartwatch will automatically start measuring your blood pressure. Once test finishes up, the smartwatch will notify you with vibration alert and will display test results. (Refer Figure 21)
Figure 21
While measuring blood pressure, it is advised that the user should rest at least for 5 minutes. Avoid tension, anxiety and emotional excitement before testing. Repeat blood pressure monitoring 3 times back to back with an interval of 2 minutes. Consider the average of those three readings.
Blood oxygen
Under blood oxygen test interface, smartwatch will automatically start measuring your blood oxygen. Once test finishes up smartwatch will notify you with vibration alert and will display test results. (Refer Figure 22)
Figure 22
Note : Data measured for blood pressure and blood oxygen are for reference only and cannot be counted as medical diagnose.
Music
Once your smartwatch is connected with your smartphone, you will be able to manage music player controls i.e play/pause/previous/next from your smartwatch. (Refer Figure 23)
Figure 23
Camera
Once your smartwatch is connected with your smartphone, you will be able to remotely access your mobile phone camera. (Refer Figure 24)
Figure 24
Stopwatch
Under stopwatch interface, click on “Start” icon to start timer, click on the pause icon “Pause” to pause timer & click on reset icon on the right side for resetting timer data. (Refer Figure 25)
Figure 25
Weather
In order to display weather on your smartwatch, you need to set up your location on the RS Motive application. (Refer Figure 26)
Figure 26
More
Click the “More” interface to adjust. (Figure 27)
Figure 27
-
Brightness
Tap on the screen to adjust the brightness. (Refer Figure 28) -
Reset
Tap on “Reset” and on the next screen select “Confirm” button to restore factory settings. (Refer Figure 29) -
Shut Down
Tap on “Shut Down” and on the next screen select “Confirm” button to power off your smartwatch. (Refer Figure 30)
Figure 28
Figure 29
Figure 30
FAQ
Why the device can’t be detected while pairing with phone Bluetooth?
- Please make sure, mobile Bluetooth is activated meanwhile check your mobile and watch should be in BT range.
- While pairing, please make sure distance between mobile phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal occasionally upon activation. Bluetooth can be start working properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized to the “RS Motive” app or there is no incoming calls and messages reminder from the smartwatch after resetting or upgrading the device firmware?
-
Please check your smartphone “Settings” > “Bluetooth” > “My devices“ to confirm whether the Bluetooth function has been connected to the smartwatch. If the Bluetooth is connected, click on the icon , located next to “Connected”, this in order to forget this device, and to cancel system Bluetooth pairing immediately.
Open your “RS Motive” app, and search for the smartwatch again. Once found, connect the smartwatch and click on “Pair” from the pop-up pairing prompt dialog box. -
Make sure that “SMS” and “Incoming call” reminder alert are turned on in the “RS Motive” app.
Why there is no incoming call / message reminder for android system?
- Please make sure that the application work in the background, as sometimes Android system hamper app working, that’s why Bluetooth connection icon is missing from your smartwatch screen. Please also check if the notification alert is turned ON under your application settings.
- In case of no message reminder, please reconnect the smartwatch after resetting and turn on the “RS Motive” app again.
Shall the Bluetooth be connected all the time? Will data in the device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be saved in the smartwatch. When the smartwatch is connected to the “RS Motive” app, the data will be uploaded to the app history automatically.
Note: The Bluetooth connection is mandatory for receiving incoming calls and messages alert.
WARNINGS
Please consult your doctor before starting any new fitness activity. The smartwatch should not be used for any medical purpose though it may dynamically monitor heart rate at real time.
SAFETY NOTICE
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is water-resistant for daily use. Please avoid wearing it for
swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature. The operating temperature is from 14°F to 122°F (-10°C to 50°C).
CE RoHS DECLARATION
We, at Riversong, take our social responsibility seriously and are committed to the cause of saving our environment. It is in keeping with these commitments that we are proud to state that Riversong smartwatch has got RoHS and CE certification.
SPECIFICATION
Product Name: Motive
Model: SW07
Screen Size: 1.33”
Material: Metal body
Battery capacity: 170mAh
Usage Time: Up to 240 hours*
Water Resistant: IP67
Compatibility: Android 5.1 & above; iOS 9.0 & above
Please check our website for more information: www.riversongtech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>