RIVERSONG MOTIVE 5E Smartwatch User Manual
- June 4, 2024
- RiverSong
Table of Contents
RIVERSONG MOTIVE 5E Smartwatch User Manual
Appearance
- Display
- Power button
- Heart Rate Sensor
- Charging port
Charging
- Use a charger with the rated output current of 1A or above to charge your watch.
- It takes 2 hours for the smartwatch to get fully charged.
- This watch is charged using a magnetic charging cable. Keep charging cables PIN dry.
Wearing the Watch
- Wear the watch strap not too tightly or too loosely, and leave enough space for the skin to breathe. This makes you feel comfortable and allows the sensor to function.
- When measuring Heart Rate saturation, wear the watch correctly. Avoid wearing the watch on the wrist joint, keep your arm flat, maintain comfortable (appropriately tight) fitting between the watch and the skin of your wrist, and keep your arm still throughout the measurement process. When affected by external factors (arm sag, arm sway, arm hair, tattoo, etc.), the measurement result may be inaccurate or the measurement may fail and no output is provided.
- We recommend that you tighten the watch strap during exercise and loosen it afterwards.
APP Downloading
Download and install the “RS Motive’ app from ‘Apple Store” or “Google Play Store” or Use your phone to scan the following QR code
Note: The operating system of your mobile phone must be Android 5.0 or iOS 10.0. or later.
Connection and pairing
A. Open the “RS Motive’ app and Click on “Add A Device” on the next interface, Select your device from the list
Removal of device
For Android smartphones, device can be disconnected simply by clicking on “Remove Device” For OS smartphones, device can be unpaired by clicking on the symbol on the right under settings-Bluetooth. post above step confirm to forget the device.
Smart watch Features
Control center:
On the watch face page, swipe down to go to the control center for the
following system features: Bluetooth connection status,Vibration on/off
,Flashlight, Theater mode,Brlghtness adjustment, Weather, and Setting.
Watch time:
Keep the watch connected to your phone. During data synchronization, the watch
automatically follows the system time of your phone.
Message/App/incoming call alerts:
Setting method: Keep the watch connected to your phone, open the app, go to
Notifications > tap App or phone Alerts to enable alerts for apps as needed.
Note: To enable this feature on an Android phone, you need to add the app to the allow list or auto-run list in the phone’s background so that the app always runs in the background. If the app is killed by the phone’s background process, the watch will be disconnected from your phone, and you cannot receive app notifications on the watch.
Heart Rate/Blood oxygen
Short press on Heart Rate/Blood oxygen page of your watch to start measuring
the data.
Note:
- Remove the protective film from heart rate sensor before usage.
- Ensure you have worn your smart watch correctly while measuring heart rate.
- The data might be inaccurate for the first time as the system needs sometime around 24-48 hours to build your personal data model. Result will be more accurate later.
- Heart rate and blood oxygen data is for reference only and it cannot be counted as medical diagnose.
Sleep :
Sleep quality has an important impact on human health. When you sleep while
wearing the watch, it automatically records your sleep data. Open the app to
view your total sleep duration from the previous night. You can also
synchronize sleep data to the app to view your sleep duration, sleep stages
and sleep score.
Music remote controller:
Keep your watch connected to your phone. When playing music on your phone, you
can start or pause the music, switch to the previous or next one.
Weather
You can check today’s weather, and other information at any time, as well as
the weather information for your current location for the next several days.
CE RoHS DECLARATION
We, at Riversong, take our social responsibility seriously and are committed to the cause of saving our environment. It Is In keeping with these commitments that we are proud to state that Riversong smartwatch has got RoHS and CE certification.
Symbol description
| Direct current
---|---
| Conformity with all relevant EC Directive requirements
| Waste electrical products should not be disposed Of with house hold waste.
Please recycle where facilities exist. Check with your Local Authority or
local store for recycling advice.
SPECIFICATION
Product Name: Motive 5E
Model: Sw55
Screen: 1.69′ color display
Charging requirement: 5V/ 1A
Charging time: about 2 hours
Frequency Range:2402-2480MHZ
Transmit Power:0.47dBm
Please check our website for more Information: www.riversongtech.com
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the Interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
RIVERSONG TECHNOLOGY CO., LTD.
Address: No, 1108 Tower S. Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong Official website:
www.rivarsongtech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>