KENT Ace 7 Litres RO+UV+UF Water Purifier Instruction Manual
- June 6, 2024
- Kent
Table of Contents
- KENT TECHNOLOGY – A Breakthrough in Water Purification*
- Salient Features of KENT ACE Mineral RO™ Water Purifier
- Items in the Box
- Important Instructions
- Reverse Osmosis Process
- UV Process
- Water Flow Diagram
- Electrical Circuit Diagram
- UV Fail Alarm*
- Filter Change Alarm*
- Computer Controlled Operation*
- Automatic Operation
- Installation Instructions
- TDS Adjustment*
- Starting-up the Purifier
- Recommended Uses of Rejected Water
- Maintenance
- Important Safety Instructions
- Warning
- Technical Specifications
- Testing Information
- Performance Data Sheet-KENT ACE Mineral RO™ Water Purifier
- Arsenic Facts
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
|
---|---
Instructions Handbook
|
---|---
Mineral RO™ TECHNOLOGY
Removes Dissolved Impurities
Retains Essential Minerals
Multiple Purification
RO+UV+UF+TDS Control
Kent Deta Hai
Sabse Shudh Paani
Welcome to KENT
Dear Customer,
At the outset, allow us to thank you for your trust in KENT water purifier.
We take pride in our reputation for product quality and industry proven
performance. We are certain that your decision to own KENT ACE Mineral RO™
water purifier will go a long way towards keeping you and your
family in good health. We are confident that you will be satisfied with its
performance and that it will serve your need for safer and cleaner drinking
water without any compromise.
This guide will help you in getting the best out of your water purifier. Please go through this booklet to familiarise yourself with its operation and maintenance.
You can look forward to years of trouble free service. To ensure that the
warranty of your water purifier is effective, it is important that you fill up
the enclosed warranty card and mail us the installation report within 15 days
of purchase. In case you need any further information, contact your
nearest KENT dealer/branch.
Best Wishes,
KENT RO SYSTEMS LTD.
KENT TECHNOLOGY – A Breakthrough in Water Purification*
Presenting the KENT ACE Mineral RO™ Water Purifier; it uses futuristic and state-of-the-art technology to provide pure & healthier drinking water.
The heart of KENT ACE Mineral RO™ Water Purifier is a Reverse Osmosis membrane having capillaries as small as 0,0001 microns that reduces even dissolved impurities (salts and heavy metals) and even converts hard water to sweet and purer drinking water. KENT ACE Mineral RO™ Water Punfier also allows the user to control the Total Dissolved Solids (TDS) level of purified water,
Salient Features of KENT ACE Mineral RO™ Water Purifier
-
Double treatment by RO + UV” processes
-
Inbuilt TDS Controller that allows adjustment of
TDS level of purified water, -
Suitable for Purification of Brackish / Tap.
Water/ Municipal Water Supply -
Wall mounted design; best suited for Indian. homes and offices
-
8L-storage tank with water level indicator.
-
Fully automatic operation, with auto-on and auto-off function
-
Computer controlled operations for enhanced Purity and long life
-
Filter Change Alarm* to indicate filter replacement time
-
UV Fail Alarm’ to indicate failure in UV system
-
RO Membrane fused inside membrane housing to prevent tampering
-
Vertically mounted SMPS for protection from water
-
Use of push-fit fittings for leakage and maintenance free performance
-
An eye appealing design
-
ABS construction for corrosion free use
Items in the Box
1. KENT ACE Mineral RO™ Water Purifier | : 01No. |
---|---|
2. 3-Way Connector | : 01 No, |
3. SS. Ball Valve | : 01No. |
4. Food Grade Pipe – 1/4 inch (Blue) | : 2.5m |
5. Food Grade Pipe – 3/8 inch (White) | : 2.5m |
6. Instructions Manual | : 01 No. |
7, Screws & Plastic Inserts | : 02 Nos. each |
8. Sticker Center Drill | : 01No. |
- Tested & Cartified by TUV-SUD South Asia (P} Ltd,
Important Instructions
Avoid exposure to direct sunlight and installation in damp areas.
| Make sure that the temperature of water entering the purifier is within 10°C – 40°C.
---|---
Make sure that the reject water pipe i$ not placed at a level higher than
the system, otherwise rejected water may flow backwards into the purifier.|
Maximum distance between the water source and the purifier should not be more
than 3 meters.
Avoid sharp bends in the pipe fittings. Do not bend or block the reject water pipe.
| Do not confine the purifier in a cabinet.
In case of not using the purifier for more than two days, kindly switch off the power supply and drainthe storage tank.
| To keep the storage tank clean, it should be drained once in 15 days.
Use Genuine KENT Spares for optimum performance.
| Do not try to service the purifier on your own, Instead, call service technician for help.
Reverse Osmosis Process
The Reverse Osmosis process, also known as hyper filtration, is the finest filtration process known till date. The process ensures reduction of particles as small as ions from a solution. Reverse Osmosis uses a semi-permeable membrane to reduce salts from potable/brackish water. In Reverse Osmosis, water pressure applied to the concentrated side forces the process of osmosis into reverse. Under enough pressure, treated water is “squeezed” through the membrane from the concentrated side to the diluted side. Salts dissolved in water as charged ions are repelled by the RO membrane. The rejected impurities on the concentrated side of the membrane are washed away in a stream of waste water and thus do not get accumulated as in a traditional filter.
UV Process
The UV light has shorter wavelength (higher energy) than the visible light. It
is called ultra-violet because it is just beyond violet light in the light
spectrum. Technically, the ultra-violet light is defined to be any wavelength
of light, which is shorter than 400 nanometer.
UV rays, which penetrate into the micro-organisms, are absorbed by the DNA of
the pathogen in the water. The DNA is altered in such a way that the pathogen
cannot reproduce itself. Thus, it is essentially killed and cannot cause
infection. This process of DNA modification is called inactivation.
Warranty Card
Product: KENT ACE
Product Code: 11032
It is certified that KENT RO Water Purifier purchased as under w.e.f. 1% Jan.
2018 carries 1 Year Warranty + 3 Years of Free Service’. (Visit/Service
charges will not be charged, however parts if replaced shall be charged)
Serial NO. …………………………………………………………………………………
Purchase Date………………………………………………………………………….. ISEALATION
Date……………………………………………………………………………..
Service Provider’s Name & Address with Stamp:
…………………………………………………………………………………………………………………………………….
*To avait this scheme of 3 Years of Free Service, customer must download the KENT Service App at the time of installation. Also future service request must be raised via KENT Service App to avait free service. Terms & Conditions applicable are mentioned overleaf.
Marketed by: KENT RO SYSTEMS LTD.
E-4, 7 & 8, Sector-59, Noida, U.P.-201 309, India.
E-mail: service@kent.co.in | Website:
www.kent.co.in Customer Care: 92-789-12365
Terms & Conditions of Warranty
KENT warrants all new products manufactured by it to be free from defects in
material and workmanship under normal usage and service from the date of
purchase as under:
- It is essential for the customer to download the KENT Service App either on Android or iOS and the customer should lodge a service request via App only.
- In case of emergency during the warranty period, the customer may lodge a service request at our Call Centre Ph. 92-789-12345.
- The warranty period commences from the date of installation by the first end-user. During this warranty period of one year, KENT Purifiers or its Authorised Service Provider [ASP] will replace or repair any part of KENT Purifiers, that in the opinion of KENT Purifiers or its ASP, would be defective in operation due to faulty material or workmanship lie. manufacturing defects] with the exception of consumables such as Sediment Filter, Carbon Filter and RO/UF Membrane. However, if the RO/UF Membrane gets clogged within first one year and/or if the filters get clogged within first six months, they shall be cleaned / repaired / replaced at no extra charge.
- In addition to this, KENT wilt also provide free service for a period of next 3 years, wherein Visit/Service charges will not be charged, however parts if replaced shall be charged.
- Visit/Service charges will not be charged only for customers residing within 25kms of municipal limits, for other areas additional charges shall be applicable.
- The product’s plastic body is not covered under warranty and hence, it must be handled with care to guard against breakage.
- The original purchaser of the unit can avail services under warranty at the point of sale, by producing the damaged part(s] atong with the original invoice.
- This warranty is void if the unit is not operated under normal municipal water or well water conditions or is subjected to the temperature above 40°C.
- Product returned to KENT Purifiers or its ASP for warranty examination must be shipped freight prepaid.
- KENT Purifiers or its ASP shall not be held liable for claims exceeding the cost of repair of the defects in workmanship.
- This warranty agreement shall not be interpreted to render KENT Purifiers or its ASP liable for injuries or damages of any kind-direct, consequential or contingent to persons or property.
- KENT Purifiers or its ASP shall not be held responsible by representative or buyer for failure to abide by any of the obligations of this warranty agreement if such failures are the result of circumstances of Forces Majeures: such as, but not limited to, floods, earthquakes, transportation strikes, labour disputes with outside suppliers or any other conditions beyond the control of KENT Purifiers or its ASP.
- KENT Purifiers or its ASP shall not be held liable for repair or alterations made without prior written approval; for products clogged by suspended matter, precipitates or biological growth; or for failures resulting from the lack of proper maintenance.
- KENT Purifiers or its ASP cannot and shall not be held liable for any sickness or illness due to the consumption of drinking water from any water purifier supplied by KENT Purifiers, since KENT: Purifiers or its ASP does not have any control over the maintenance and usage of water purifier.
- This warranty agreement excludes all productsé component parts or damage to any part of this water purifier which, in the opinion of KENT Purifiers or its ASP, have been subjected to misuse; misapplication; negligence; alteration; accident or operation contrary to our _ instructions, incompatibility with accessories not installed by KENT Purifiers or its ASP, or that have beer repaired with component parts other than those manufactured by or obtained from KENT Purifiers or its ASP. Damage caused by freezing, flood, fire on Act of God is not covered by this warranty. In all such cases regular charges will apply. This limited warranty does not include service to diagnose a claimed malfunction in this unit,
- KENT Purifiers reserves the right to alter or improve design and specifications at any time! without any contingent obligations to prospective buyers or owners of the products previously sold.
- Any disagreements and obligations based upon the purchase of KENT Purifiers products and thereby imposed on KENT Purifiers or its ASP shall be governed by and construed according to the laws of INDIA and subject to the jurisdiction of Delhi Courts only,
- KENT Purifiers or its ASP assumes no warranty liability in connection with this water purifier other than that specified herein. This warranty is in lieu of all other warranties, expressed or implied, including warranties of fitness for a particular purpose. KENT or its ASP does not authorise any person or represent tive to assume for them any, other obligations on the sale of this water purifier.
- Under no circumstances, the liabilty of KENT: Purifiers or its ASP shall exceed the value of the product.
- Under no circumstances are the terms mentioned above negotiable and no employee of KENT: Purifiers or its ASP has the authority to supersede them.
Why is it essential to download the KENT Service Application?
- Customer can lodge a service request/complaint anytime (24×7)
- The customer can track/monitor the progress of service request/complaint.
- Complete case history of the services done can be viewed.
- Regular feedback & offer details on the App.
To download the App scan the QR code
Affix Stamp here
To,
KENT RO SYSTEMS LTD.
E-6, 7 & 8, Sector-59, Noida, U.P. -201 309, India.
Ph.: 92-789-12345
E-mail: service@kent.co.in Website:
www.kent.co.in
Installation Report
Product: KENT ACE MINERAL PO™ WATER PURIFIER
Serial No: …………………………………………………………………………………… Customer’s Name:
…………………………………………………………………….
Customer’s Address:
………………………………………………………………………………………………………………………………………………………………………..
Customer’s Ph: ………………………………………………………… TDS of Purified Water:
……………………………………………………………………………….
Customer’s Signature: ………………………………………………..
Invoice No: ……………………………………………………. Invoice Date:
……………………………………………………………………………………………………….
Installation Date: …………………………………………… Service Provider’s Name:
…………………………………………………………………………………….
Service Provider’s Address:
……………………………………………………………………………………………………………………………………………………………
Service Provider’s Ph: …………………………………………………………………. TDS of Raw Water:
……………………………………………………………….
Service Provider’s Stamp: …………………………………………………………………………………….
By signing on this installation report, the customer hereby sgress to the terms & conditions of warranty mentioned on the back side of the warranty card.
Water Flow Diagram
S.No | SP-CO. | ITEM DESCRIPTION |
---|---|---|
1 | 20035 | LOW PRESSURE SWITCH |
2 | 20010 | SEDIMENT FILTER |
3 | 20028 | SOLENOID VALVE |
4 | 20005 | BOOSTER PUMP |
5 | 20009 | ACTIVATED CARBON FILTER |
6 | 20003 | OF FILTER |
7 | 20034 | TDS CONTROL VALVE |
8 | 20002 | RO MEMBRANE |
9 | 20018 | FLOW RESTRICTOR TUBE |
10 | 20541 | UV CHAMBER |
11 | 20015 | POST CARBON FILTER |
12 | 20058 | NON RETURN VALVE |
13 | 20148 | WATER STORAGE TANK |
14 | 20030 | FLOAT SENSOR |
Electrical Circuit Diagram
[NOTE: The above specifications are subject to modifications for improvement without notice].
UV Fail Alarm*
KENT ACE Mineral RO™ Water Purifier has an in-built feature that sounds an
audible alarm if the UV lamp malfunctions. This feature is provided to ensure
purity. This UV Fail Alarm will sound as following:
Two short beeps after every two seconds.
In case such an alarm is audible, kindly switch off the purifier and call the
service technician for help.
The purifier will stop its purification process in such a circumstance.
Filter Change Alarm*
KENT ACE Mineral RO™ has an in-built feature that sounds an audible alarm to
indicate replacement time for filters. This alarm will be audible after 700
hours of use since the last filter change (or since the time of installation).
The Filter Change Alarm will sound as following:
4 short beeps after every two seconds for 30 seconds. The alarm will repeat
after every 2 hours of use.
In case such an alarm is audible, please call the service technician and
request him to change the filters of the purifier. However, if the filters are
not changed within the next 60 hours of operation, the purifier will stop
functioning to ensure purity and hygiene. The following alarm will be audible
after 60 Hours. A continuous beep for an infinite time.
In case, such an alarm is audible, kindly switch off the purifier and call the
service technician to replace the filters. In such a circumstance, the
purifier will not function unless the filters are changed.
Computer Controlled Operation*
To ensure delivery of purer and healthier water, a micro-processor is installed in the purifier that periorms the following functions: –
UV Stabilisation Delay: To ensure that the UV lamp is pre-heated and is working at its optimum level before it starts disinfecting water, the controller provides a two seconds delay to UV lamp when the purifier is switched on, During this period, only the UV lamp is switched on and other electrical devices of tha purifier are switched off.
Purification Delay: To ensure that the idle water lying in the internal pipes and in the UV chamber is disinfected before being passed into the storage tank, the system provides 5 second delay when the purifier is switched on. During this time, the UV lamp kills all micro-organisms that may be in the water inside UV chamber. After this delay, all other electrical devices such as booster pump and solenoid valve are switched on to start normal purification process,
Audible Alarm: The controller also controls the timing of UV Fail Alarm and the Filter Change Alarm.
Automatic Operation
- The purifier automatically shuts off when the storage tank is full
- The purifier does not start when inlet water supply pressure falls below 0.3 kg/em?
- The purifier automatically restarts when water level drops below the maximum
- The purifier does not allow any water rejection in absence of electricity / when tank is full
Tested & certified by TUV-SUD South Asia (P) Lid.
Installation Instructions
The KENT ACE Mineral RO™ Water Purifier is a product of advanced technology, which ensures safe and clean drinking water, The purifier is easy and convenient to install.
Recommended Site Preparations:
- Single Phase 100-250 V AC, 50-60 Hz. connection not more than 3m away from the point of installation of purifier
- Raw water supply with % inch nipple not more than 3m away
- Drain for rejected water not more than 3m away
- Space as per dimensions of the purifier
- Wall/plane surface for mounting two screws and holding the machine
- The system and installation must comply with state and local laws and regulations
Specific Instructions:
-
KENT ACE Mineral RO™ Water Purifier is a wall-mounted purifier. Make sure that it is only mounted on a wall. Avoid installation on
wooden and metallic stands -
For optimum performance and minimum inlet pressure required, ensure that the raw water supply tank is at least 10 ft above the level at which the purifier is installed
-
Iis preferable to install the purifier near a sink so that inlet and reject water lines are easily available
Installation Procedure:
- Paste the central drill sticker on wall at (3.6 feet to 4.0 Feet from the ground) as per your convenience.
- Ensure that the sticker is pasted straight on the wall, then drill holes as per the space provided on stic!
- Now, insert the puff up with the helo of a hammer,
- Screw in two 10X50 self-taping screws, 5.4 inches (138 mm) apart horizontally.
- Carefully hang the purifier on the wall with the help of wall-mounting slot holes provided on the back sid of the purifier
Note:
-
If the wall is not straight or the screws are not properly drilled in an even position, it will damage your purifier,
-
Keep the device away fron heat or direct sunlight.
-
First fix the SS ball valve (marked as no. 4) to the 1/4 inch port of the 3-way connecter (marked as no. 2) as shown in figure 2.
-
Connect the 3-way connector to the raw water supply (marked as no. 1) as shown in the figure 3. The 3-way connector is fit in line with the raw water supply.
-
The other end of the 3-way connector can be connected to a tap (marked as no.3) as shown in figure or can be plugged off if not required.
Step-3
-
Now connect one end of the white pipe to SS bail valve and another end to the upper push-fit elbow fitting to the left hand side of the purifier labelled as WATER IN, as shown in fig 1.
-
Similarly, connect one end of the white pipe to the lower elbow fitting connector in tank labelled as REJECT WATER and leave the or nee oe a ones other end in the drain, as shown in fig 2.
Step-4
Before connecting the power supply, it is important that you perform the
following functions:
- Open the SS ball valve (Handle parallel to the bail valve) to start the flow of water into the purifier, as shown in the figure.
- Wait for 2-3 minutes to ensure that the filters are soaked in water.
Step-5
- Connect the power supply.
- Installation is complete.
TDS Adjustment*
The unique TDS Controller enables customers to retain the contents of natural minerals in purified water, as per their requirement.
- Tuming the screw of the valve anti-clockwise, results in an increased mineral content
- Tuming the screw of the valve clockwise, results in a decreased mineral content
Starting-up the Purifier
- Switch on the power supply
- Wait till the storage tank fully fils up **
- Switch off the power supply
- Drain the storage tank by opening the drain Plug present at the bottorn of the storage tank Sa as to remove any dust particles present in the pipes and storage tank
- Close the drain plug & switch on the power supply
- The purifier is ready to use
Recommended Uses of Rejected Water
Rejected water has high concentration of salts and usually goes down the drain, but if required, can be used for gardening purposes. It has high concentration of salts and minerals which accelerate plant growth, Rejected water can also be used for cleaning purposes, i.e. utensils cleaning, mopping the floor etc.
- Tested & certified by TUV-SUD South Asia (P} Ltd.
** Tested or certified flushing time – 24hrs,
Maintenance
To ensure that the purifier operates at its optimum level, a routine maintenance must be performed, The frequency of the maintenance will greatly depend upon the raw water quality and consumption of treated water.
- Storage tank must be drained once in 2 weeks, To do so, switch off the power supply, open the drain plug at the bottom of the tank & allow the water to drain, Then screw back the plug and switch on the power supply
- Replace sediment, activated carbon & post carbon when the filter change alarm is audible OR after every 12 months. It is recommended to change the FRT when the filters are replaced
- Replace the RO membrane once in a year
- Replace the UV Lamp once in a year
- If you are not going to use the purifier for a long time ( in case you are on a holiday, tour or out of home), make sure that you disconnect the power supply, tum off the raw water supply and drain the storage tank
The reverse osmosis system contains a replaceable treatment component critical for the effective reduction of total dissolved solids and that product water shail be tested pertodically to verify that the system is performing properly.
Replacement of spare parts are as under:
-20010 | SP Inline Sediment Filter 8″ |
---|---|
-20009 | SP Inline Carbon Filter 8″ |
-20002 | SP RO Membrane Welded 8″ Housing |
-20015 | SP Post Carbon Filter (Blue) |
-20003 | SP Hollow Fibre Membrane (RO) |
-20018 | SP FRT 550/600 |
Note: Filters and membranes are consumables, The replacement time depends upon
the quality of raw water and water consumption. They are not covered under the
warranty, However, if a filter chokes within six months and a membrane within
a year, it will be cleaned/repaired/replaced free of cost. Changing the
filters and system inspection is available on call. The treatment capacity of
RO membrane will reduce with time due to clogging of pores of membranes.
“This reverse osmosis system contains a replaceable component critical to the
efficiency of the system. Replacement of the reverse osmosis component should
be with one of identical specifications as defined by the manufacturer, to
ensure the same efficiency and contaminant reduction performance.”
Important Safety Instructions
- If the supply cord is damaged, it must be replaced by the original part in order to avoid hazard
- Children should be supervised to ensure that they do not play with the appliance
- This appliance is not intended for use by persons {including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
Warning
- Do not operate the UV-C emitter when it is removed from the appliance enclosure
- Read the maintenance instructions before opening the appliance
- The appliance must be disconnected from the supply before replacing the UV-C emitter
Technical Specifications
Product | KENT ACE |
---|---|
Product Code | 41032 |
Product Generic Name | Water Purifier |
Colour | White |
Applications | Suitable for Purification of Brackish /Tap Water / Municipal |
Water Supply
Purification Production Rate| Upto 15 L/hr.
Body Material| ABS Food Grade Plastic
Mounting| Wall-mounted
Dimensions (mm)| 380 (L) x 270 (W) x 505 (H)
Inlet Water Pressure/Temp (Min.)| 0.3 kg/cm2 / 10°C
Inlet Water Preseure/teme (Max)| 4 kg /cm2 / 40°C
Min/Max. Operating pH| 6.5-8.0
Filter Cartridge| Sediment, Carbon Filter, UF and Post Carbon
UV Lamp Wattage| 11w
Life of UV Lamp| 5000 hrs. of operation
Weight| 8.34 kg
Storage Capacity| 8L
Maximum Duty Cycle| 75 Uday
Membrane Type| Thin Film Compasite RO
Booster Pump Voltage| 24V DC
Total Power Consumption| 60 W
Input Power Supply| Single Phase 100-250 V AC, 50-60 Hz.
IP Rating| IPx1
- Purification capacity tested for raw water having TDS level of 750 ppm at room temperature.
Testing Information
The System has been tested according to IS 10500:2012 (Standards for drinking water as per Bureau of Indian Standards) for reduction of the nazarcious substances as listed below,
Performance Data Sheet-KENT ACE Mineral RO™ Water Purifier
“This system has been tested according to NSF/ANSI 58 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 58”,
Substance| Influent challenge concentration mg/L| Maximum
permissible product water concentration mg/L| Minimum %
reduction
---|---|---|---
Total Dissolved Solids| 750 ± 40 mg/L| 187| 86.8.%
Arsenic (+5)| 0.30 ± 10%| 0.010| 98.7
Barium| 10.0 ± 10%| 2.0| 97.7
Fluoride| 8.0 ± 10%| 2.| 96.3
Lead| 0.15 ± 10%| 0.010| 99.3
Nitrate / Nitrite| 30 ± 10%| 10| 69.5
“Do not use with water that is microbiologically unsafe or of unknown quality
w/o adequate disinfection before or after the system”,
Arsenic, Baum, Fluoride, Lead, Nitrate/Nitite contents as tested & certified
by WOA as per standards NSF/ANS| 58.
“Efficiency rating means the percentage of the influent water that is
available to the user as reverse osmosis treated water under operating
condition that approximate typical daily usage”.
The system conform to NSF/ANSI 58 for the specific perfomance claims as
verified and substantiated by test data. While testing was performed under
standard laboratory conditions, actual performance may vary. The influent
water to the system shall include no organic solvents, Chlorine <2 mg/L, pH
7-8, Iron <2mo/L, Turbidity
<1 NTU and hardness <1000mag/L.
“This system is acceptable for treatment of influent concentrations of no more
than 27 mg/L nitrate and 3 mg/L Nitrite (In combination measured as N), and is
certified for nitrate/nitrite reduction only for water supplies with pressure
of 140kPa (20psig) or greater’.
‘This system has been tested for the teatment of water containing pentavalent
arsenic (also known as As (V), As (+5), or arsenate) at concentrations of 0.30
mg/L or less. This system reduces pentavalent arsenic but may not remove other
forms of arsenic. This system is to be used on water supplies containing
detectable free chlorine residual or on water supplies that have been
demonstrated to contain only pentavalent arsenic. Treatment with chloramines
(combined chlorine) is not sufficient to ensure complete conversion of
trivalent arsenic to pentavalent arsenic, Please see the Arsenic Facts section
of the performance data sheet for further information’.
Arsenic Facts
Arsenic (As) is a naturally oocurring contaminant found in many ground waters.
It generally occurs in two forms (valences or oxidation states): pentavalent
arsenic {also known as As(V), As(+5), or arsenate) and trivalent arsenic (also
known as As(iill, As(+3), or arsenite). in natural ground water, arsenic may
exist as trivalent arsenic, pentavalent arsenic, or a combination of both,
Although both forms of arsenic are potentially harmful to human health,
trivalent arsenic is considered more harmful than pentavalent arsenic, More
information about arsenic and its toxicity can be found on the U.S.
Environmental Protection Agency website at
http://wwwv.epa.gov/safewater/arsenic.html
This system is designed to remove only pentavalent arsenic. This teatment
system does not provide a feature for conversion of trivalent arsenic to
pentavalent arsenic, The system may remove some trivalent arsenic, however, it
has not been evaluated for its ability to remove trivalent arsenic, Trivalent
arsenic is generally more difficult to remove from drinking water than
pentavalent arsenic. Trivalent arsenic can be converted to pentavalent arsanic
in the presence of an effective oxidant such as free chlorine.
The arsenic in water containing detectable free chlorine or that has been
treated with another effective oxidant will be in the pentavalent arsenic
form.4 Treatment with chloramine (combined chlorine) is not sufficient to
ensure complete conversion of trivalent arsenic to pentavalent arsenic,
Marketed by:
KENT RO SYSTEMS LTD.
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India.
E-mail: sales@kent.co.in or Website:
www.kent.co.in
Manufactured by:
KENT RO SYSTEMS LTD.
1 ) Khasra No. 93, Village-Bantakhedi, Tehsil-Roorkee, District-Haridwar,
Uttarakhand-247 668, India.
2) A-6, Sector-87, Noida-201 305, U.P., India.
For customer complaints, contact our Customer Care Officer at:
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India. Call: 92-789-12345
E-mail: service@kent.co.in or visit us at
www.kent.co.in
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>