pTron Musicbot Mini Wireless Speaker

pTron Musicbot Mini Wireless Speaker

Keys Operations

• “ /M” On/Off and mode change button.
• “ ” long press for volume increase, long press “ ” button to decrease the volume.
• Short press “ ” for next song, short press “ ” for previous song.
• Short press “ ” to play/pause music/ answer/hang up; long press “ ” for rejecting phone calls.

Wireless Connection
Please make sure pTron Musicbot mini wireless speaker is charged. Long press “ /M” On/Off button for about 3 seconds. After power on you will hear voice prompt ‘Wireless Mode”. The blue LED indicator will start flashing. This means wireless speaker is in pairing mode.

Phone Connection

1. Turn on the wireless on your smart device, the wireless icon will be shown on the top of your smart device’s screen and then your device will search for the other wireless devices. Make sure your smart device is visible to all nearby wireless devices mode.
2. Enter into the wireless set up interface and press scan to search device.
3. If you see a device with the name pTron Musicbot, it means your device has found the wireless speaker. Just connect the PTron Musicbot with your device.
4. If you see a pop up message to enter code, please type “0000” (Note: need to input the code if your phone wireless version is below 2.1. No need to enter the code if wireless version is higher then 2.1).
5. After connection you will hear “paired” voice prompt. The blue LED indicator will stop flashing.

Computer Connection

If there is no wireless in your computer, please use any wireless adapter and install drive. If your computer has in-built wireless, then turn on and follow the below steps:

1. Find the wireless icon click right hand button choose add equipments.
2. Search the wireless device and then you can find pTron Musicbot.
3. Click on the pTron Musicbot device name, add device to your computer and install drive program, after few minutes your device will show “the device is connected successfully”.
4. Turn off the wireless speaker and turn it on again, you will find the speaker will connect to your computer automatically with voice prompt “paired”. Now you can enjoy your favorite music.

Wireless Call
After pairing your device with pTron Musicbot speaker, you can answer/hang up/reject calls. “ ” short press to answer the call. Hang up call, short press “ ” when you are finish talking. Reject a call, long press “ ”. Call back, short press “ ” twice to call the last dialed phone number.

Mode Switch
Connect wireless/plug TF card/plud headphone jack. Short press “ /M” to switch modes.

Wireless Mode
pTron Musicbot can play audio file from a computer/smartphone/ iPad and other devices with wireless function.

TF Mode
Plug TF card in the speaker, the device will be in TF play mode and will play music from the TF card.

Headphone Jack Mode
Plug cable into AUX and plug the other end into 3.5mm port. Speaker can play audio file from a computer/iPad/smartphones. Please note that speaker cannot change previous/next song in this mode.

Charge
pTron Musicbot wireless speaker can be charged both on/off mode. It can be charged from a computer or adapter.

Indicator Light
Red LED indicator light will be on while charging, once the speaker is full charged it will turn off automatically.

Low Battery Indication
You will hear voice prompt “low battery please charge” when speaker is low on power. Please put the speaker on charging.

Disclaimer
The colors and specifications shown/mentioned in the user manual may differ from the actual product. Images shown are for representation purpose only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

Port and Key

Technical Parameters

• Wireless Technology
• Transmission Range: Up to 10 M
• Speaker: 40 mm 4 ohms 3 W
• Impedance: 4 ohms
• SNR (Signal to Noise Ration): >80 dB
• Frequency Response: 80Hz-18KHz
• Charging Voltage: 3.7V Micro USB
• Battery: 500 mAh
• Playtime: 4 Hours
• Charging time: About 3 Hours
• Size: 82×30 mm

Packing Content

• Wireless speaker – 1pc
• Charging cable – 1pc
• Audio cable – 1pc
• Instruction manual – 1pc

Safety & Maintenance

1. Don’t use this speaker in a high-temperature environment. The battery may blow up or PCB may get damaged.
2. Don’t put the speaker into water or other corrosive chemicals. Battery may blow up or PCB may get damaged.
3. Please charge the speaker every 20 days.
4. Please keep the speaker in safe and dry environment.
5. It is better to use an accessory Micro USB to charge or connect with a computer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>