leisurewize LW610 Multi-Function Electric Cooking Pan Instruction Manual
- June 6, 2024
- leisurewize
Table of Contents
Multi-Function,
Electric Cooking Pan
PLEASE READ AND KEEP THESE INSTRUCTIONS BEFORE OPERATING THIS MULTI-FUNCTION ELECTRIC COOKING PAN.
IMPORTANT:
When using electrical appliances, basic safety precautions should always be followed:
- Read and keep all instructions.
- Do not touch the hot metal surface, use the handle always.
- To protect against electric shock do not immerse cord, plug or temperature regulator in water or other liquid.
- WARNING: This electrical appliance contains a heating function. Surfaces, also different than functional surfaces, can develop high temperatures. Since temperatures are differently perceived by different persons, this equipment shall be used with CAUTION. The equipment shall be touched only at intended handles and gripping surfaces and use heat protection like gloves or similar. Surfaces other than intended gripping surfaces shall get sufficient time to cool down before getting touched.
- Unplug when not in use and before cleaning. Allow cooling before adding or removing parts.
- Keep the appliance and its cord out of reach of children.
- This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
- Use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use the cooker if the pan, cable, or plug are damaged.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- Extreme caution must be used when moving an appliance containing hot foods.
- Always attach the plug to the appliance first, then plug the cord in the wall outlet.
- Do not use appliances other than intended use.
CLEANING AFTER USE:
Name | Method | Remark |
---|---|---|
Clean the heat plate after using with a wet towel or paper. when it is |
still hot. if the
residues are difficult to clean. put a little water on the plate and turn it
on (make sure that the protection under the
heat plate is provided). The plate wall is heated and the residues can be
rubbed away.| 1. Do not use any detergent. nylon brush or metal brush, the
heat plate will be damaged.
2. Do not put the hotplate into water or wash it with water when the heat
plate is still hot otherwise it will not function and could catch fire.
| Clean with a soft sponge and a little detergent.| Do not use any thinner.
benzene detergent or chemical disposed towel, this could damage the surface.
Automatic temperature controller| Clean with soft paper or dry soft towel.| Do
not clean the discreteness of the automatic temperature controller. this could
cause an electric shock or a fire.
After cleaning the multi-function electric cooking pan, dry it carefully with
a soft cloth or towel and turn it on to DRY. After drying daub it with layer
of cooking oil.
CAUTIOUS MEASURE TO OPERATE THE HOTPLATE
The surface of the heat plate is very glossy, so take care as follows:
– Do not use sharp or metal utensils made of metal. Do not cut foods on the
heat plate.
– Do not put the automatic temperature regulator on the heat plate. It is not
permitted to contact the heat plate.
– Do not use a nylon or metal brush. This will damage the surface of the heat
plate.
– The plate must be cleaned after each use with a dry and soft cloth.
– Do not sue if any part of the heat plate/temperature regulator, socket,
cord, or plus are damaged.
CAUTIOUS MEASURES AND PROPOSALS
To avoid any injuries, fire, functioning error, or electric shock, please
follow these cautions:
– Stop use and bring the appliance to the next trader.
– Use the correct power supply for the appliance.
– Do not use other high-watt appliances at the same time or the same socket.
– Do not tangle the cord
– Do not pull the plug by the cable – remove the plug by holding the actual
plug.
– Do not clean the heat plate with water or any other liquid.
– After cleaning the appliance, you must dry it properly before use again.
– Do not place the appliance in an unsteady place or near flammable materials
(newspaper, paper, PVC table cover, etc). The heat plate must be a minimum of
15cm away from walls and furniture.
PRODUCT DESCRIPTION
AUTOMATIC TEMPERATURE REGULATOR
- The automatic temperature regulator is a highly sensitive part, you must be very careful not to damage the part in any way.
- Always use the automatic temperature regulator supplied with this appliance. Never use another regulator.
- You must insert the automatic temperature regulator correctly for it to work. If removing, do not use excessive force as not to pull the cord.
- If the automatic temperature regulator becomes damaged, stop using it immediately and take it to a qualified electrician/store for repair.
- Before connecting the automatic temperature regulator, you must check the scale of the automatic temperature regulator is set to off.
OPERATION INSTRUCTIONS
Before first use, clean the heat plate and cover.
1. Ensure the temperature is set to OFF. Insert the automatic temperature
regulator in the socket of the cooker (A).
2. Plug into AC 230 Voltage socket (B).
3. Set the temperature scale to the correct setting of the food you will be
cooking.
Voltage | Wattage |
---|---|
100 grade | Baked foods: hamburgers etc |
150 | Pan foods: scrambled eggs, ham, smoked meats. |
200
250| pizza
COOKING
1. After warming the cooker for 5-10 minutes, if the control light is on, you
can begin making food.
2. Once the food is done, you can keep it warm by setting the temperature
setting to ‘keep warm’.
– If the temperature light is off, the cooker is ready to use.
– Please note there will be a sound from the cooking pan; this comes from the
heater and the heat plate, and is normal.
– Do not put your hand, or any flammable material, underneath the appliance.
COVER
Use cover to keep food simmering or warm if necessary.
AFTER USING
1. Always turn the temperature to OFF.
2. Always pull out the plug from the socket after each use, then remove the
automatic temperature regulator from the heat plate and allow to cool before
removing other parts.
3. Allow the appliance to cool fully before cleaning.
TECHNICAL SPECIFICATION:
Voltage | 220-240V 50Hz |
---|---|
Wattage | 1500W |
Temperature (adjustable): | Up to 240°C |
Timer | 0-30min |
WARNING
Check if the voltage indicated on the appliance fits the local mains voltage. Do not use the appliance if there is any damage to the plug, main cord or other parts. Do not go to any unauthorized person to replace or fix the damaged main cord. Keep the main cord away from hot surfaces. Do not plug in the appliance or operate the control panel with wet hands. Do not place the appliance against a wall or against other appliances. Leave at least 10cm free space on the back and sides and 10cm free space above the appliance. Do not place anything on top of the appliance. Do not use the appliance for any other purpose than described in this manual. Do not let the appliance operate unattended. During hot air frying, hot steam is released through the air outlet openings, keep your hands and face at a safe distance from the steam and from the air outlet openings. Also, be careful of hot steam and air when you remove the pan from the appliance. Surfaces may become hot during use (Fig. 2). Immediately unplug the appliance if you see dark smoke coming out of the appliance. Wait for the smoke emission to stop before you remove the payment from the appliance.
Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West,
Trafford Park, Manchester M17 1RY
Sales inquiries:
sales@streetwizeaccessories.com
Technical enquiries:
support@streetwizeaccessories.com
+44 (0)161 447 8597
www.streetwizeaccessories.com