FREUND FE-IPDS-28A Series Door Phone User Manual
- June 4, 2024
- FREUND
Table of Contents
FREUND FE-IPDS-28A Series Door Phone
Product Overview
Product Description
Freund FE-IPDS-28A is a SIP-compliant, hands-free, and video door phone. It can be connected with Freund indoor monitors for remote access controlling and monitoring. Users can communicate with visitors via audio and video calls and unlock the door if they need. Users can also use RFID cards to unlock the door. It is applicable in apartments, offices and so on.
Connector Introduction
-
Ethernet (POE): Ethernet (POE) connector which it can provide both power and network connection.
-
12V/GND: External power supply terminal if POE connector is not available.
-
RS485A/B: RS485 Terminal
-
WG_D0/WG_D1: Wiegand Terminal
-
DOOR A/B/C: Trigger Signal Input Terminal
-
Relay A/B/C (NP/NC/COM): Relay Control Terminal
-
12V_OUT/GND_OUT: Power Output Terminal
-
Note: The general door phone interface diagram is only for reference.
Daily Use
Make a Call
- Call: Users can make a call by entering room number, SIP extension or IP address and then pressing “Dial Key”.
- Security Center Call: Users can make a speed dial to security center by pressing “Dial Key” directly.
- Call from contacts: Users can press “Up/Down” key to enter contacts interface, select the contact to dial by pressing up/down key on contacts interface and pressing “Dial Key” to make a call.
Receive a Call
FE-IPDS-28A will auto answer the incoming calls by default. If Auto Answer
is disabled, users can press “Dial Key” to answer the incoming calls.
Unlock
Unlock using Public Pin Codes
Users can unlock doors by using predefined public pin code. Press “#,” public
pin code, “#” to unlock, and then users will hear “The door is now opened.” If
users press wrong public pin code, the screen will show “Incorrect PIN.” The
default public pin code is 33333333. The default public pin code is 8 digits,
and it can be changed to 3 to 8 digits.
Unlock using Private Pin Codes
Users can unlock doors by using predefined private pin code. Press “#,”
private pin code, “#” to unlock, and then users will hear “The door is now
opened.” If users press wrong private pin code, the screen will show
“Incorrect PIN.” The default private pin code is 8 digits, and it can be
changed to 3 to 8 digits.
Unlock using RFID Cards
Place the predefined user cards in RFID card reader to unlock. Under normal
conditions, FE-IPDS-28A will announce “The door is now opened.” If the card
has not been registered, FE-IPDS-28A will show “Unauthorized.” Both 13.56MHz
and 125KHz RFID cards are supported on FE-IPDS-28A.
Unlock using RFID Cards
Users can press the predefined DTMF code from an answer unit to remotely
unlock the door during the call. Users will also hear “The door is now
opened.”
- Freund Elektronik A/S, in cooperation with our sister company Freund Elektronika D.O.O. Sarajevo, is developing an IP-Based Intercoms, Audio Systems, Access Control and Smart Home solutions.
- As a developer, manufacturer, and reseller, we have been self-improving and perfecting ourselves for over 30 years.
- In the industry, we negotiate the most advanced and innovative solutions regarding the building communication. Our daily focus is on the development and user friendliness of our high quality and pleasantly designed products.
- As a developer and manufacturer of our own IP-INTEGRA system, we have made a top-of-the-line products for Door Telephony, Public Audio, and Access Control solution.
- Our development department, together with our partners, has created elegant and robust door phones, SIP-Centrals, Terminals, IP-Speakers, ACC Controllers, and applications with intelligent features using the most advanced technologies when available, and creating new technologies when they are not while keeping it simple for our customers.
FREUND ELEKTRONIKA d.o.o
International Burch University | Francuske revolucije bb | 71210 Ilidza |
Bosnia and Herzegovina www.ip-integra.com |
[email protected] | +387 33 922 890 