LUCCI 159061 Nevada 1LT Track Spotlight Instruction Manual

Installation Instructions

NEVADA 1LT TRACK SPOTLIGHT
SKU# 159061, 159062
Rated Voltage 220-240V~ 50Hz

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and use of this product. Please keep instructions for future reference.
NOTE: This installation instruction applies to the light fitting only.
When working with 240V, a licensed electrician is required.
Lucci track kit (SKU# 140020, 140022, 140057, 140058) and globe are sold separately.

Warranty

• This light fitting is covered by a 12-month warranty. The warranty is from the date of purchase, not the date of installation.
• Warranty will be void if there is any damage due to improper usage or modification to the fitting.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.
• The warranty is subject to the fitting being used with the Lucci track kit (sold separately).

Installation Requirements

• Before installation, check the installation location has the Lucci track kit (sold separately) pre-installed on the ceiling.
  If it does not, please contact a licensed electrician to arrange installation before continuing.

• Select a suitable location for installation:
  – This product is suitable for indoor use only.
  – The mounting point must support 2 times the weight of the fitting.
  – Ensure the fitting is not installed in the direct line of an air vent/system.
  – When installing a fitting in an area prone to moisture, ensure that the area is well ventilated and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.

• Do not exceed the maximum wattage rating.

• Take care not to pull any electrical wires during unpacking as this may damage the connection.

• Layout all the components on a smooth surface and make sure there are no components missing before assembling.
  If parts are missing, return the complete product to the place of purchase for inspection or replacement.

• Check whether the fitting has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair, or replacement.

• Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.

Installation Directions

1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material.

2. Remove the shade (A) from the fitting by loosening the screw (E) using the Allen key (D) provided.

3. Install a globe (B – not included) into the lamp holder. Do not exceed the maximum wattage rating.

4. Install the shade (A) back onto the fitting and secure using the screw (E) with the Allen key (D) provided.

5. Look at the track adaptor and locate the side with the earth pin (C).
   Look at the Lucci track kit (F – not included) and locate the side which has the groove.
   The side with the groove is the side with the earth connection.
   Ensure the earth pin (C) is installed into the same side of the Lucci track kit (F – not included) which has the groove.

6. Install the fitting by twisting and locking it into the Lucci track kit (F – not included).

7. After the installation, switch on the fitting to test and enjoy your new lighting product.

Safety Tips

• Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe, or making any adjustment to the fitting.
• To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
• Select a suitable location away from liquids and hazards.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
• To clean, wipe with a damp clean cloth. Never soak the fitting with water.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>