ruarkaudio BackPack II Li-Ion Battery Pack BP2 User Guide
- June 6, 2024
- ruarkaudio
Table of Contents
User guide
BackPack II
Li-Ion battery pack BP2
11.1V 2200mAh
What’s in the box?
BackPack II, Allen key (1), 2 x M4 fixing screws (2).
Please retain all packaging.
Fit your BackPack II
Unplug the mains adapter (3) from your Ruark radio or speaker.
Place your BackPack II on the back of your radio or speaker and push the DC
output connector (4) into the 14V DC socket (5).
Secure your BackPack II with the two screws provided (2) using the Allen key
(1), taking care not to overtighten them.
Connect the mains adapter (3) to the DC input socket (6) on the underside of
your BackPack II.
Switch on your BackPack II
Press the power button (7) to the ON position.
To turn on your R1 mk3 radio when it is powered by a battery alone, you need to press and hold the standby key for a few seconds until the logo appears on the display.
If leaving your radio or speakers off for extended periods of time with the BackPack II fitted but not plugged into the mains, we recommend you switch the power button (7) to OFF.
Using it with an R1 mk4 radio
You can use the R1 mk4 radio as normal. The only difference is that to save
power when powered by battery power alone the screen turns off in standby
mode. If using alarms, please ensure the battery has sufficient charge.
Using it with an R1 mk3 radio
To turn the R1 mk3 radio on, press and hold the standby key for a few seconds
until the logo appears on the display.
To turn the radio off, press the standby key as normal but please note that to
conserve battery life your radio will switch off completely instead of going
into standby.
When powered by battery alone, alarms will not work once the R1 mk3 is
switched off. Alarms will work if your BackPack II is left ON but we don’t
recommend this.
Using it with an R1 mk2 radio or MR1 speakers
When your BackPack II is ON your R1 mk2 or MR1 will behave as if powered by a
mains adapter so simply press the standby key or knob to turn your radio or
speakers on or to standby.
Please note that leaving your R1 mk2 or MR1 on standby when running solely
from the battery power will drain the battery quite quickly.
To get the maximum battery life, we recommend your BackPack II is switched OFF
when not using your radio or speakers.
Charging your BackPack II
Whenever your BackPack II is connected to power it will charge, indicated by
the green light on the back (8). Typically, it will take around 5hrs to fully
charge.
Specifications
Model: BP2
Battery Type: Li-Ion
Capacity: 2200mAh
Nominal output: 11.1VDC
Charge voltage: 14.0VDC
Approx. charging time: 5hrs
Approx. battery life: 8hrs
Safety information
CONTAINS LITHIUM-ION CELLS
Never attempt to open the battery pack for any reason. If the battery pack
case is cracked or damaged, do not fit it to a radio or speaker. Do not crush,
drop or damage the battery pack. Do not use a battery pack that has been
dropped or damaged in any way. Damaged battery packs should be returned to a
service center or recycled.
Do not incinerate the battery pack even if it is severely damaged or is
completely worn out.
If battery contents come into contact with the skin, immediately wash the area
with mild soap and water.
Read this user guide and follow all instructions, it will help you set up and
operate your product properly.
Heed all warnings and keep this user guide for future reference. Refer all
servicing to qualified service personnel.
This device is intended to be operated ONLY from the AC voltages listed on the
device or included power supply. Operation from voltages other than those
indicated may cause irreversible damage to the device and void the product
warranty.
Use only the power supply provided with the original Ruark radio or speakers
or an approved alternative.
Ensure that the power adapter, mains plug, or mains connector into the unit is
readily accessible in case of disconnection from the mains is required.
The mains adapter, mains plug, or mains connector must be removed from the
socket to completely disconnect the system from mains power.
Do not place any naked flame sources, such as lighted candles, on or near the
device. Do not install near any heat sources such as radiators, stoves, or
other devices (including
amplifiers) that produce heat.
Avoid exposure to extreme heat or cold.
Only use attachments/accessories specified for this device. Make no
modifications to the system or accessories. Unauthorized alterations may
compromise the safety, regulatory compliance, and system performance.
To reduce the risk of fire or electrical shock, do not expose the device to
rain or moisture. Do not expose this device to dripping or splashing, and do
not place objects filled with liquids, such as vases, on or near the device.
As with any electronic products, use care not to spill liquids into any part
of the system. Liquids can cause a failure and/or a fire hazard.
Always leave a space of at least 10cm around the device for ventilation and
ensure that curtains or other objects never cover ventilation openings on the
device.
Regulatory information
This device is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment. This symbol indicates that the product or associated batteries should not be disposed of as general household waste. As with any electrical equipment, please dispose of it according to local regulations.
CE COMPLIANCE INFORMATION
This product conforms to all EU Directive requirements as applicable by law.
You may obtain a free copy of the Declaration of Conformity by contacting your
dealer, distributor, or Ruark Audio. Hereby, Ruark Audio, declares that this
BackPack II is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Guarantee information
We guarantee this product to be free from defects for a period of two years
from the date of purchase, providing due care and attention has been paid.
Product failure through accidental damage (however caused), excessive wear and
tear, negligence, or unauthorized modification will void your guarantee.
Should you experience a problem please contact us via our website www. Ruark
audio. com. If your product needs to be returned it should be packaged in its
original packing along with proof of purchase. If it is not possible to return
the product by hand, then it should be sent carriage prepaid by a reputable
parcel carrier. If the original packing is not available, replacement packing
can be purchased from us.
Guarantee for overseas sales
The distributor in the country of purchase guarantees products purchased
outside the UK. For details, please contact your local Ruark distributor or
outlet. THIS GUARANTEE IN NO WAY VARIES OR REMOVES THE PURCHASER’S STATUTORY
RIGHTS. E&OEDesigned in
Great Britain
59 Tailors Court, Temple Farm Industrial Estate,
Southend on Sea, SS2 5TH, UK
www.ruarkaudio.com