LUCCI 250920 Hansen LED Table Lamp with Wireless Charger Instruction Manual

: June 6, 2024
: Lucci

Table of Contents

Warranty
Installation requirements
Operation directions
Safety tips
Specifications
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

HANSEN LED TABLE LAMP WITH WIRELESS CHARGER
SKU# 250920
Rated Voltage 12V DC, 1.5A

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and use of the product. Please keep the instructions for future reference.

Warranty

This product is covered by a 3-year warranty. Please retain the proof of purchase.
Warranty will be void if there is any damage due to improper usage or modification to the product.
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation requirements

Select a suitable location for the luminaire;
– Ensure it is on a flat and stable surface.
– This product is suitable for indoor use only.
– Do not place flammable material near or over the luminaire.
– Ensure the luminaire is not placed next to any air vents and is not in any moist or damp areas.
Take care not to pull any electrical wires during unpacking as this may damage the connection.
Layout all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair, or replacement.

Operation directions

Operation:

Remove all packaging material from the product.
Select a suitable location for the table lamp. See the installation requirements above.
Insert the connector of the power adaptor into the base.
NOTE: Only use with the adaptor provided with the table lamp.
Insert the power adapter into the main socket outlet and ensure it is fully plugged in.
Turn the power on at the mains power socket outlet.
Adjust the lamp head to your desired angle.
NOTE: Do not adjust over 180° horizontally as this may damage the internal wires.
To turn the lamp ON/OFF, press the touch switch A.
To dim from 10%-50%-100%, press the touch switch B.
To change the color temperature from 3000K-4300K-6500K, press the touch switch C.

Wireless charging:
NOTE: The wireless charger is only compatible with Qi-compatible devices. Only charge your compatible devices.
If unsure, check the user manual of your device.

Place your device in the wireless charging area. Make sure the device is over the circle symbol.
Charging will activate automatically. Check the status of your device to ensure charging is activated.
NOTE: Slightly adjust the position of your device if charging is not activated.

Safety tips

Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, or adjustment to the luminaire.
To avoid injury or damage to the luminaire, ensure that the power lead is secure before connecting the power.
Do not place any metal objects in the wireless charging area.
Select a suitable location away from liquids and hazards.
Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
To clean, wipe with a damp clean cloth. Never soak the luminaire with water.